No. | parte # | Fabricante | Descripción | Hoja de Datos |
---|---|---|---|---|
|
|
Texas Instruments |
Remote and Local Temperature Sensor •1 ±1°C Remote Diode Sensor • ±1°C Local Temperature Sensor • Programmable Non-Ideality Factor • Series Resistance Cancellation • Alert Function • Offset Registers for System Calibration • Pin and Registers Compatible With ADT7461 and ADM1032 • Progr |
|
|
|
Texas Instruments |
Temperature Switch •1 Qualified for Automotive Applications • AEC-Q100 Qualified With the Following Results: – Device Temperature Grade 1: –40ºC to 125ºC Ambient Operating Temperature Range – Device HBM ESD Classification Level 2 – Device CDM ESD Classification Level C |
|
|
|
Texas Instruments |
REMOTE TEMPERATURE AND LOCAL TEMPERATURE SENSOR 1 •234 SOT23-8 Package • ±1°C Remote Diode Sensor (Max) • ±2.5°C Local Temperature Sensor (Max) • Series Resistance Cancellation • n-Factor Correction • Two-Wire/ SMBus™ Serial Interface • Multiple Interface Addresses • Diode Fault Detection • RoHS C |
|
|
|
Texas Instruments |
Remote and Local Temperature Sensor • Qualified for automotive applications • AEC-Q100 qualified with the following results: – Device temperature grade 1: –40°C to 125°C ambient operating temperature range • ±1°C accuracy for local and remote diode sensors • 0.0625°C resolution for loc |
|
|
|
Texas Instruments |
Remote and Local TEMPERATURE SENSOR 1 •234 SOT23-8 and DSBGA (WCSP) PACKAGES • ±1°C REMOTE DIODE SENSOR (MAX) • ±1.5°C LOCAL TEMPERATURE SENSOR (MAX) • SERIES RESISTANCE CANCELLATION • n-FACTOR CORRECTION • TWO-WIRE/ SMBus™ SERIAL INTERFACE • MULTIPLE INTERFACE ADDRESSES • DIODE FAULT |
|
|
|
Texas Instruments |
Linear Thermistor • Automotive Qualifications – AEC-Q100 Grade 1: –40 °C to 125 °C – AEC-Q100 Grade 0 (DYA): –40 °C to 150 °C – AEC-Q100 Grade 0 (ELPG): –40 °C to 170 °C • AEC-Q200 Tested • Functional Safety-Capable – Documentation available to aid functional safety s |
|
|
|
Texas Instruments |
Linear Thermistor •1 Silicon-based thermistor with a positive temperature coefficient (PTC) • Linear resistance change across temperature • 10-kΩ nominal resistance at 25 °C (R25) – ±1% maximum (0 °C to 70 °C) • Wide operating temperature of –40 °C to +125 °C • Consis |
|
|
|
Texas Instruments |
High-Accuracy Analog Output Temperature Sensors • AEC-Q100 qualified for automotive applications – TMP235-Q1 grade 0: –40°C to +150°C – TMP236-Q1 grade 1: –40°C to +125°C • Functional Safety-Capable – Documentation available to aid functional safety system design • Tight accuracy across a wide tem |
|
|
|
Texas Instruments |
Digital Temperature Sensor •1 SOT563 Package (1.6-mm × 1.6-mm) is a 68% Smaller Footprint than SOT-23 • Accuracy Without Calibration: – 2.0°C (max) from –25°C to 85°C – 3.0°C (max) from –40°C to 125°C • Low Quiescent Current: – 10-μA Active (max) – 1-μA Shutdown (max) • Supply |
|
|
|
Texas Instruments |
Digital Temperature Sensor •1 Multiple Device Access (MDA): – Global Read/Write Operations • I2C™ and SMBus™-Compatible Interface • Resolution: 8 Bits • Accuracy: ±1°C Typical ( –10°C to 100°C) • Low Quiescent Current: – 3-μA Active IQ at 0.25 Hz – 1-μA Shutdown • Supply Range: |
|
|
|
Texas Instruments |
Digital Signal Processor RS SGUS017H -- OCTOBER 1993 -- REVISED OCTOBER 2001 D IEEE Standard 1149.1† Test-Access Port (JTAG) D Two Identical External Data and Address Buses Supporting Shared Memory Systems and High Data-Rate, Single-Cycle Transfers: -- High Port-Data Rate of |
|
|
|
Texas Instruments |
Resistor-Programmable Temperature Switch and Analog Out Temperature Sensor • Accuracy: ±1°C (typical at +25°C) • Programmable trip point • Programmable hysteresis: 5°C/10°C • Open-drain outputs • Low power: 110 μA (maximum) • Wide voltage range: +1.8 V to +18 V • Temperature range: –40°C to +125°C • Analog out: 10mV/°C • SC |
|
|
|
Texas Instruments |
High-Accuracy Temperature Sensor •1 8-Channel Remote Diode Temperature Sensor Accuracy: ±0.75°C (Maximum) • Local and Remote Diode Accuracy: ±0.75°C (Maximum) • Local Temperature Sensor Accuracy for the DSBGA Package: ±0.35°C (Maximum) • Temperature Resolution: 0.0625°C • Supply and |
|
|
|
Texas Instruments |
Resistor-Programmable Temperature Switch •1 Threshold Accuracy: – ±0.5°C Typical – ±3°C Maximum (60°C to 100°C) • Temperature Threshold Set By 1% External Resistor • Low Quiescent Current: 40 μA, Typical • Open-Drain, Active-Low Output Stage • Pin-Selectable 10°C or 30°C Hysteresis • Reset |
|
|
|
Texas Instruments |
1.8-V Digital Temperature Sensor •1 Low-Voltage Alternative to NCT75 and ADT75 • Digital Output with Two-Wire Serial Interface • Up to 8 Pin-Programmable Bus Addresses • Overtemperature ALERT Pin with Programmable Trip Values • Shutdown Mode for Battery Power Saving • One-Shot Conve |
|
|
|
ETCTI |
Accurate Programmable Digital Temp Sensor w/ SPI Interface (Rev. B) |
|
|
|
ETCTI |
TMP821 Two-Phase Half-Wave Motor Predriver (Rev. A) |
|
|
|
Texas Instruments |
Infrared Thermopile Sensor •1 Integrated MEMS Thermopile for Noncontact Temperature Sensing • 14-Bit Local Temperature Sensor for Cold Junction Reference – ±1°C (max) from 0°C to +60°C – ±1.5°C (max) from –40°C to +125°C • Integrated Math Engine – Directly Read Object Temperat |
|
|
|
Texas Instruments |
Digital Temperature Sensor •1 High Accuracy (Without Calibration): – ±0.4°C (max) from –20°C to +70°C – ±0.55°C (max) from –40°C to +100°C – ±0.7°C (max) from –55°C to +125°C • High Resolution: 14 Bits (0.015625°C) • UART-Compatible, SMAART Wire™ Interface: – Allows Up To 32 D |
|
|
|
Texas Instruments |
Temperature Sensor •1 Digital Output: SMBus™, Two-Wire, and I2C Interface Compatibility • Resolution: 9 to 12 Bits, User-Selectable • Accuracy: – ±1°C (Typical) from –55°C to 125°C – ±2°C (Maximum) from –55°C to 125°C • Low Quiescent Current: 45-μA, 0.1-μA Standby • Wi |
|