| No. | parte # | Fabricante | Descripción | Hoja de Datos |
|---|---|---|---|---|
|
|
|
Texas Instruments |
DUAL 4-PORT AND DUAL 8-PORT LVDS REPEATERS • Two Line Receivers and Eight ('109) or Sixteen ('117) Line Drivers Meet or Exceed the Requirements of ANSI EIA/TIA-644 Standard • Typical Data Signaling Rates to 400 Mbps or Clock Frequencies to 400 MHz • Outputs Arranged in Pairs From Each Bank • |
|
|
|
|
Texas Instruments |
PLL FREQUENCY MULTIPLIER • A Member of the MuxIt™ SerializerDeserializer Building-Block Chip Family • Pin Selectable Frequency Multiplier Ratios Between 4 and 40 • Input Clock Frequencies From 5 to 50 MHz • Multiplied Clock Frequencies up to 400 MHz • Internal Loop Filters a |
|
|
|
|
Texas Instruments |
16-Bit Analog Front-End 1 •23 Eight Low-Noise PGAs and Eight High-Resolution ADCs (ADS1198) • Low Power: 0.55mW/channel • Input-Referred Noise: 12μVPP (150Hz BW, G = 6) • Input Bias Current: 200pA • Data Rate: 125SPS to 8kSPS • CMRR: –105dB • Programmable Gain: 1, 2, 3, 4, |
|
|
|
|
Texas Instruments |
HIGH-SPEED DIFFERENTIAL LINE DRIVERS AND RECEIVERS • Typically Meets or Exceeds ANSI TIA/EIA-644-1995 Standard • Operates From a Single 2.4-V to 3.6-V Supply • Signaling Rates up to 400 Mbit/s • Bus-Terminal ESD Exceeds 12 kV • Low-Voltage Differential Signaling With Typi- cal Output Voltages of 285 |
|
|
|
|
Texas Instruments |
Low-Power 12.5-Gbps 8-Channel Repeater 1 •2 Proven System Interoperability • Comprehensive multi-protocol Repeater Family • Low 65-mW/Channel (Typ) Power Consumption, With Option to Power Down Unused Channels • Transparent Management of Link Training Protocol for PCIe and SAS • Advanced S |
|
|
|
|
Texas Instruments |
Delta-Sigma ADC •1 Current Consumption as Low as 315 µA (typ) • Wide Supply Range: 2.3 V to 5.5 V • Programmable Gain: 1 to 128 • Programmable Data Rates: Up to 2 kSPS • Up to 20 Bits Effective Resolution • Simultaneous 50-Hz and 60-Hz Rejection at 20 SPS With Singl |
|
|
|
|
Texas Instruments |
16-Bit ADC •1 Ultra-Small X2QFN Package: 2 mm × 1.5 mm × 0.4 mm • Wide Supply Range: 2.0 V to 5.5 V • Low Current Consumption: 150 μA (Continuous-Conversion Mode) • Programmable Data Rate: 8 SPS to 860 SPS • Single-Cycle Settling • Internal Low-Drift Voltage Re |
|
|
|
|
Texas Instruments |
Fan-Out Switch •1 Can be configured for – Differential Crosspoint Switching – Differential Single Channel 1:4 Multiplexer and Demultiplexer – Differential 2-Channel 1:2 Multiplexer and Demultiplexer – Differential Fan-Out of Signal Pair to Two Ports Simultaneously |
|
|
|
|
ETCTI |
DS14185 EIA/TIA-2323 Driver x 5 Receiver (Rev. C) |
|
|
|
|
ETCTI |
DS1489/DS1489A Quad Line Receiver (Rev. D) |
|
|
|
|
Texas Instruments |
12-Bit Analog-to-Digital Converter •1 Ultrasmall X2QFN Package 2 mm × 1.5 mm × 0.4 mm • 12-Bit Noise-Free Resolution • Wide Supply Range: 2 V to 5.5 V • Low Current Consumption: – Continuous Mode: Only 150 μA – Single-Shot Mode: Automatic Power-Down • Programmable Data Rate: 128 SPS t |
|
|
|
|
Texas Instruments |
Analog-to-Digital Converter •1 Programmable Data Rates Up to 2 kSPS • Single-Cycle Settling for All Data Rates • Simultaneous 50-Hz and 60-Hz Rejection at 20 SPS • Analog Multiplexer With 8 (ADS1148) and 4 (ADS1147) Independently Selectable Inputs • Programmable Gain: 1 V/V to |
|
|
|
|
Texas Instruments |
HIGH-SPEED DIFFERENTIAL LINE DRIVERS/RECEIVERS • Controlled Baseline – One Assembly/Test Site, One Fabrication Site • Enhanced Diminishing Manufacturing Sources (DMS) Support • Enhanced Product-Change Notification • Qualification Pedigree (1) • Meet or Exceed the Requirements of ANSI TIA/EIA-644- |
|
|
|
|
Texas Instruments |
24-Bit Analog-to-Digital Converter • Complete front-end for bridge sensors • 23.5-bits effective resolution at gain = 1 • 19.2-bits noise-free resolution at gain = 64 • Low-noise PGA • Selectable gains of 1, 2, 64, and 128 • RMS noise: – 17 nV at 10 SPS at gain = 128 – 44 nV at 80 SPS |
|
|
|
|
Texas Instruments |
24-Bit Analog-to-Digital Converter • Complete front-end for bridge sensors • 23.5-bits effective resolution at gain = 1 • 19.2-bits noise-free resolution at gain = 64 • Low-noise PGA • Selectable gains of 1, 2, 64, and 128 • RMS noise: – 17 nV at 10 SPS at gain = 128 – 44 nV at 80 SPS |
|
|
|
|
Texas Instruments |
24-Bit Analog-to-Digital Converter 1 •2 Complete Front-End for Bridge Sensors • Internal Amplifier, Gain of 128 • Internal Oscillator • Low-Side Power Switch for Bridge Sensor • Low Noise: 35nVrms • Selectable Data Rates: 10SPS or 80SPS • Simultaneous 50Hz and 60Hz Rejection at 10SPS |
|
|
|
|
Texas Instruments |
Delta-Sigma Modulator D 16-Bit Resolution D 14-Bit Linearity D ±250mV Input Range with Single +5V Supply D 1% Internal Reference Voltage D 1% Gain Error D Flexible Serial Interface with Four Different Modes D Implemented Twinned Binary Coding as Split-Phase or Manchester |
|
|
|
|
Texas Instruments |
24-Bit ADC •1 Low Current Consumption: As Low as 120 μA (typ) in Duty-Cycle Mode • Wide Supply Range: 2.3 V to 5.5 V • Programmable Gain: 1 V/V to 128 V/V • Programmable Data Rates: Up to 2 kSPS • Up to 20-Bits Effective Resolution • Simultaneous 50-Hz and 60-H |
|
|
|
|
Texas Instruments |
12-Bit Analog-to-Digital Converter •1 Qualified for Automotive Applications • Complete 12-Bit Data Acquisition System in a Tiny SOT-23 Package • Low Current Consumption: Only 90 μA • Integral Nonlinearity: 1 LSB Max • Single-Cycle Conversion • Programmable Gain Amplifier Gain = 1, 2, |
|
|
|
|
Texas Instruments |
16-Bit ADC •1 Ultra-Small X2QFN Package: 2 mm × 1.5 mm × 0.4 mm • Wide Supply Range: 2.0 V to 5.5 V • Low Current Consumption: 150 μA (Continuous-Conversion Mode) • Programmable Data Rate: 8 SPS to 860 SPS • Single-Cycle Settling • Internal Low-Drift Voltage Re |
|
Desde 2024. D4U Semiconductor.
|