| No. | parte # | Fabricante | Descripción | Hoja de Datos |
|---|---|---|---|---|
|
|
|
National Semiconductor |
1.5 Gbps 2x2 LVDS Crosspoint Switch |
|
|
|
|
Vitesse Semiconductor |
6.5 Gbps 144 x 144 Asynchronous Crosspoint Switch ` 6.5 Gbps 144 × 144 strictly nonblocking switch matrix with multicast and output striping programming modes ` Input signal equalization (ISE) with programmable control globally or on a per-channel basis ` Adjustable output pre-emphasis EQ ` Differe |
|
|
|
|
National Semiconductor Corporation |
3 Gbps HD/SD SDI Extended Reach And Configurable Adaptive Cable Equalizer and design enhancements including longer cable equalization, lower output jitter, configurable pin mode and SPI modes, a powersaving sleep mode, and programmable output common mode voltage and swing. The LMH0384 implements DC restoration to correctly |
|
|
|
|
Micrel Semiconductor |
11.3Gbps Laser Diode Driver The SY88022L is a single 3.3V supply, small form factor driver for telecom/datacom applications using FP/DFB lasers at data rates up to 11.3Gbps. The driver can deliver modulation current up to 60mA and a bias current up to 80mA All support document |
|
|
|
|
ON Semiconductor |
1.8V / 2.5V 10Gbps Equalizer Receiver • Maximum Input Data Rate > 10 Gbps • Maximum Input Clock Frequency > 7.5 GHz • Backplane and Cable Interconnect Compensation • 225 ps Typical Propagation Delay • 30 ps Typical Rise and Fall Times • Differential CML Outputs, 400 mV Peak-to-Peak, Typi |
|
|
|
|
Fairchild Semiconductor |
Bridge Rectifiers • Integrally molded heat-sink provided very low thermal resistance for maximum heat dissipation. • Surge Overload Ratings from 300 A to 400 A. • Isolated voltage from case to lead over 2500 V. • UL certified, UL #E258596 • Terminals Finish Material - |
|
|
|
|
Micrel Semiconductor |
3.3V 3.2Gbps High-Speed Limiting Post Amplifier • Up to 3.2Gbps operation • Low noise CML data outputs • Chatter-Free LOS generation • Open Collector TTL LOS output • TTL /EN Input • Differential PECL inputs for data • Single 3.3V power supply • Available in a tiny 10-pin (3mm x 3mm) MSOP Applicat |
|
|
|
|
Zarlink Semiconductor |
High speed 2.5 Gbps 850 nm VCSEL • • • • 850 nm oxide confined VCSEL Data rate up to 3.1 Gbps High fiber coupling efficiency Optical field stable over temperature and current ANODE CASE Bottom View The cathode is in electrical contact with the case. Applications • • High speed D |
|
|
|
|
General Semiconductor |
GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER MECHANICAL DATA Case: Molded plastic with heatsink integrally mounted in the bridge encapsulation Terminals: Either plated 0.25" (6.35mm). Faston lugs or plated copper leads 0.040" (1.02mm) diameter. Suffix letter "W" added to indicate leads (e.g. G |
|
|
|
|
Micrel Semiconductor |
1.25Gbps HIGH-SPEED LIMITING POST AMPLIFIER s s s s s s s s s Up to 1.25Gbps operation Low noise Chatter-Free LOS Generation Open Collector TTL LOS Output TTL /EN Input Differential PECL inputs for data Single power supply Designed for use with SY88902 and SY88904 Available in a tiny 10-pin (3 |
|
|
|
|
Micrel Semiconductor |
Precision 3.2Gbps CML/LVPECL Backplane Transceiver a high-speed loopback test mode. The input control signal LOOPBACK enables an internal loopback path from the transmitter input to the receiver output. The SY58621L operates from a 3.3V ±10% supply and is guaranteed over the full industrial temperatu |
|
|
|
|
National Semiconductor |
3Gbps HD/SD SDI Adaptive Cable Equalizer include separate carrier detect and output mute pins which may be tied together to mute the output when no signal is present. A programmable mute reference is provided to mute the output at a selectable level of signal degradation. Features ■ SMPTE |
|
|
|
|
National Semiconductor |
3Gbps HD/SD SDI Reclocker ■ Supports SMPTE 424M, SMPTE 292M, and SMPTE 259M (C) serial digital video standards ■ Supports 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.967 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Gbps, and 2.97 Gbps serial data rate operation Supports DVB-ASI at 270 Mbps Sing |
|
|
|
|
Micrel Semiconductor |
11.3Gbps Laser Diode Driver The SY88022AL is a single 3.3V supply, small form-factor, multi-rate laser driver for telecom/datacom applications using FP/DFB lasers at data rates up to 11.3125Gbps. The driver can deliver a modulation current of up to 75mA into a 15Ω external loa |
|
|
|
|
National Semiconductor |
(DS25BR100 / DS25BR101) 3.125 Gbps LVDS Buffer four levels of pre-emphasis for use as an optimized driver device, while the DS25BR110 features four levels of equalization for use as an optimized receiver device. The DS25BR150 is a buffer/repeater with the lowest power consumption and does not fea |
|
|
|
|
Micrel Semiconductor |
12.5Gbps Limiting Post Amplifier a decision threshold control that can be used for offset compensation or to optimize the Bit Error Rate (BER) in noisy applications as WDM where optical amplifiers such as EDFAs and Raman amplifier are used. This device connects to typical transimped |
|
|
|
|
America Semiconductor |
Silicon Bridge Rectifier |
|
|
|
|
Micrel Semiconductor |
11.3Gbps VCSEL DRIVER • Operates from a single 3.3V supply • Operation up to 11.3Gbps • Modulation current up to 20mA • Bias current up to 20mA • Small form factor 3mm x 3mm QFN package Applications • Multi-rate LAN up to 11.3Gbps: 8xFC, 10G GbE. • SFP+, XFP, XPAK, XENPA |
|
|
|
|
Pericom Semiconductor |
6 GHz / 12 Gbps Clock / Data Fanout Buffer ÎÎInput Clock Frequency up to 6 GHz Typical ÎÎMaximum Input Data Rate up to 12 Gbps Typical ÎÎ2 pairs of differential CML outputs ÎÎLow additive jitter, < 0.05ps (max) ÎÎInput accepts: CML, LVDS, CML, SSTL input level ÎÎOutput to Output skew: <20ps Î |
|
|
|
|
ON Semiconductor |
Bridge Rectifiers • Integrally Molded Heat−Sink Provided Very Low Thermal Resistance for Maximum Heat Dissipation • Surge Overload Ratings from 300 A to 400 A • Isolated Voltage from Case to Lead over 2500 V • UL Certified, UL #E258596 • Terminals Finish Material ♦ Si |
|
Desde 2024. D4U Semiconductor.
|