| No. | parte # | Fabricante | Descripción | Hoja de Datos |
|---|---|---|---|---|
|
|
|
ON Semiconductor |
SPI bus flash memory inherent to a serial flash memory device, the LE25U40CMC is housed in an 8-pin ultra-miniature package. All these features make this device ideally suited to storing program in applications such as portable information devices, which are required to |
|
|
|
|
Toshiba Semiconductor |
Dual Bus Switch • • • • • • Operating voltage: VCC = 4.5~5.5 V High speed operation: tpd = 0.25 ns (max) Ultra-low on resistance: RON = 5 Ω (typ.) Electro-static discharge (ESD) performance: ±200 V or more (JEITA) ±2000 V or more (MIL) TTL level input (control input |
|
|
|
|
NXP Semiconductors |
NPN wideband silicon germanium RF transistor and benefits Low noise high gain microwave transistor Noise figure (NF) = 0.7 dB at 5.8 GHz High maximum stable gain 27 dB at 1.8 GHz 110 GHz fT silicon germanium technology 1.3 Applications 2nd LNA stage and mixer stage in DBS LNB’s Sate |
|
|
|
|
Siemens Semiconductor Group |
Silicon PIN Photodiode with Daylight Filter q Especially suitable for applications of 880 nm q Kurze Schaltzeit (typ. 20 ns) q 5 mm-Plastikbauform im LED-Gehäuse q Auch gegurtet lieferbar 880 nm q Short-switching time (typ. 20 ns) q 5 mm LED plastic package q Also available on tape Anwendun |
|
|
|
|
Hitachi Semiconductor |
128M LVTTL interface SDRAM 100 MHz 1-Mword x 32-bit x 4-bank PC/100 SDRAM • • • • • • • • • Single chip wide bit solution (× 32) 3.3 V power supply Clock frequency: 100 MHz (max) LVTTL interface Extremely small foot print: 1.27 mm pitch Package: BGA (BP-108) 4 banks can operate simultaneously and independently Burst read |
|
|
|
|
Hitachi Semiconductor |
256M LVTTL interface SDRAM 100 MHz 1-Mword x 64-bit x 4-bank/2-Mword x 32-bit x 4-bank PC/100 SDRAM • • • • • • • • • Single chip wide bit solution (× 64/× 32) 3.3 V power supply Clock frequency: 100 MHz (max) LVTTL interface Extremely small foot print: 1.27 mm pitch Package: BGA (BP-108) 4 banks can operate simultaneously and independently Burst |
|
|
|
|
Panasonic Semiconductor |
Semiconductor laser power controller • Digital setting of playback current, peak current, bias current and abnormal light emitting level • Peak current and bias current can be modulated by the external signal. • Driving current set-up (digital set-up) For playback: 8-bit + 4-bit (0 mA t |
|
|
|
|
Cypress Semiconductor |
128 Mbit (16 Mbyte) 3.0V SPI Flash Memory CMOS 3.0 Volt Core Density – 128 Mbits (16 Mbytes) Serial Peripheral Interface (SPI) with Multi-I/O – SPI Clock polarity and phase modes 0 and 3 – Extended Addressing: 24- or 32-bit address options – Serial Command set and footprint compatible |
|
|
|
|
Cypress Semiconductor |
3.0V SPI Flash Memory Serial Peripheral Interface (SPI) with Multi-I/O – SPI Clock polarity and phase modes 0 and 3 – Command subset and footprint compatible with S25FL-K Read – Normal Read (Serial): – 50 MHz clock rate (40 °C to +85 °C/105 °C) – Fast Read (Serial): |
|
|
|
|
Cypress Semiconductor |
3.0V SPI Flash Memory Serial Peripheral Interface (SPI) with Multi-I/O – SPI Clock polarity and phase modes 0 and 3 – Command subset and footprint compatible with S25FL-K Read – Normal Read (Serial): – 50 MHz clock rate (40 °C to +85 °C/105 °C) – Fast Read (Serial): |
|
|
|
|
Toshiba Semiconductor |
TC7SZ125F |
|
|
|
|
Hitachi Semiconductor |
128M LVTTL interface SDRAM 100 MHz 1-Mword x 32-bit x 4-bank PC/100 SDRAM • • • • • • • • • Single chip wide bit solution (× 32) 3.3 V power supply Clock frequency: 100 MHz (max) LVTTL interface Extremely small foot print: 0.8 mm pitch Package: FBGA (BP-90) 4 banks can operate simultaneously and independently Burst read/ |
|
|
|
|
Cypress Semiconductor |
512 Mbit / 1.8 V Serial Peripheral Interface Serial Peripheral Interface (SPI) with Multi-I/O – SPI Clock polarity and phase modes 0 and 3 – Double Data Rate (DDR) option – Extended Addressing – 24 or 32-bit address options – Serial Command subset and footprint compatible with S25FL-A, S25FL- |
|
|
|
|
Cypress Semiconductor |
3.0V SPI Flash Memory Serial Peripheral Interface (SPI) with Multi-I/O – SPI Clock polarity and phase modes 0 and 3 – Command subset and footprint compatible with S25FL-K Read – Normal Read (Serial): – 50 MHz clock rate (40 °C to +85 °C/105 °C) – Fast Read (Serial): |
|
|
|
|
Zetex Semiconductors |
PRECISION 1.25 VOLT MICROPOWER VOLTAGE REFERENCE • No stabilizing capacitor required • Typical TC 30ppm/°C • Typical slope resistance 0.65⍀ • ± 3% and 2% tolerance • Industrial temperature range • Operating current 50A to 5mA • Transient response, stable in less than 10s • Small outline SOT23 pac |
|
|
|
|
Cypress Semiconductor |
64 Mbit (8 Mbyte) 1.8-V FS-S Flash Serial Peripheral Interface (SPI) with Multi-I/O – SPI Clock polarity and phase modes 0 and 3 – Double Data Rate (DDR) option – Extended Addressing - 24 or 32-bit address options – Serial Command subset and footprint compatible with S25FL1-K, S25FL |
|
|
|
|
Hitachi Semiconductor |
(HA166024FP / HA166025FP) Read / Write IC |
|
|
|
|
Hitachi Semiconductor |
(HA166024FP / HA166025FP) Read / Write IC |
|
|
|
|
Toshiba Semiconductor |
Quad Bus Buffer • High-speed: tpd = 4.4 ns (typ.) (VCC = 3.3 V) • Low power dissipation: ICC = 4 μA (max) (Ta = 25°C) • Input voltage level: VIL = 0.8 V (max) (VCC = 3 V) VIH = 2.0 V (min) (VCC = 3 V) • Power-down protection is provided on all inputs • Balanced prop |
|
|
|
|
KEC semiconductor |
(KIA7219x - KIA7245x) Bipolar Linear Integrated Circuit |
|
Desde 2024. D4U Semiconductor.
|