| No. | parte # | Fabricante | Descripción | Hoja de Datos |
|---|---|---|---|---|
|
|
|
Toshiba |
Maximum Power 47W BTL x 4-ch Audio Power-IC 2. Applications Power IC developed for car audio applications. Weight: 7.7 g (typ.) 3. Features • High output power, low distortion, and low noise property (for details, refer to the Table 3 1) • Build-in AUX-IN (pin25) • Built-in various mute |
|
|
|
|
Maxim Integrated |
Extremely Accurate I2C-Integrated RTC/TCXO/Crystal ● ● Highly Accurate RTC Completely Manages All Timekeeping Functions • Real-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year, with Leap-Year Compensation Valid Up to 2100 • Accuracy ±2ppm from 0°C to +40°C |
|
|
|
|
Toshiba Semiconductor |
Maximum Power 43 W BTL 4-ch Audio Power-IC • High power output : POUT MAX (1) = 43 W (typ.) P (VCC = 14.4 V, f = 1 kHz, JEITA max, RL = 4 Ω) : POUT MAX (2) = 39 W (typ.) (VCC = 13.7 V, f = 1 kHz, JEITA max, RL = 4 Ω) : POUT (1) = 26 W (typ.) (VCC = 14.4 V, f = 1 kHz, THD = 10%, RL = 4 Ω) : PO |
|
|
|
|
Maxim Integrated |
3V Nonvolatile Controller Converts CMOS SRAM into nonvolatile memory Unconditionally write-protects SRAM when VCC is out of tolerance Automatically switches to battery backup supply when VCC power failure occurs Monitors voltage of a lithium cell and provides advanced |
|
|
|
|
Maxim |
15kV ESD-Protected / Slew-Rate-Limited / Low-Power / RS-485/RS-422 Transceivers o For Fault-Tolerant Applications MAX3430: ±80V Fault-Protected, Fail-Safe, 1/4 Unit Load, +3.3V, RS-485 Transceiver MAX3440E –MAX3444E: ±15kV ESD-Protected, ±60V Fault-Protected, 10Mbps, Fail-Safe, RS-485/J1708 Transceivers o For Space-Constrained Ap |
|
|
|
|
Maxim |
Cold-Junction-Compensated K-Thermocoupleto-Digital Converter ● Direct Digital Conversion of Type -K Thermocouple Output ● Cold-Junction Compensation ● Simple SPI-Compatible Serial Interface ● 12-Bit, 0.25°C Resolution ● Open Thermocouple Detection Ordering Information PART MAX6675ISA TEMP RANGE -20°C to +85 |
|
|
|
|
Maxim Integrated |
8-Digit LED Display Drivers ● 10MHz Serial Interface ● Individual LED Segment Control ● Decode/No-Decode Digit Selection ● 150μA Low-Power Shutdown (Data Retained) ● Digital and Analog Brightness Control ● Display Blanked on Power-Up ● Drive Common-Cathode LED Display ● Slew-Ra |
|
|
|
|
Maxim Integrated Products |
Single-/Dual-/Triple-Voltage uP Supervisory Circuits significantly improves system reliability and accuracy when compared to separate ICs or discrete components. The active-low reset output asserts and remains asserted www.DataSheet4U.com for the reset timeout period after all the monitored voltages ex |
|
|
|
|
Maxim Integrated |
High-Sensitivity Pulse Oximeter and Heart-Rate Sensor ● ● Heart-Rate Monitor and Pulse Oximeter Sensor in LED Reflective Solution ● ● Tiny 5.6mm x 3.3mm |
|
|
|
|
Maxim Integrated |
10-Bit Programmable Gamma Reference System integrated multiple-time programmable (MTP) memory to store gamma and VCOM values on the chip, eliminating the need for external EEPROM. The MAX9669 supports up to 100 write operations to the on-chip nonvolatile memory. The gamma outputs can drive 20 |
|
|
|
|
Maxim |
True RS-485/RS-422 Transceivers ● ● Operate from a Single 3.3V Supply— No Charge Pump! ● ● Interoperable with +5V Logic ● ● 8ns Max Skew (MAX3485/MAX3490/MAX3491) ● ● Slew-Rate Limited for Errorless Data Transmission (MAX3483/MAX3488) ● ● 2nA Low-Current Shutdown Mode (MAX3483/MAX3485/M |
|
|
|
|
Toshiba Semiconductor |
Maximum Power 47W BTL x 4-ch Audio Power IC 2. Applications Power IC developed for car audio applications. Weight: 7.7 g (typ.) 3. Features High output power, low distortion, and low noise property (for details, refer to the Table 1) Build-in AUX-IN (pin25) Built-in various mute f |
|
|
|
|
Maxim |
Step-Up DC-DC Converters an adjustable current limit and circuitry to reduce inductor ringing. ________________________Applications Pagers Wireless Phones Medical Devices Hand-Held Computers PDAs RF Tags 1 to 3-Cell Hand-Held Devices Functional Diagrams Typical Operating Cir |
|
|
|
|
Maxim Integrated Products |
Single-Piece 4Mb Nonvolatile SRAM ♦ Single-Piece, Reflowable, 27mm x 27mm BGA Package Footprint ♦ Internal Manganese Lithium Battery and Charger ♦ Integrated Real-Time Clock ♦ Unconditionally Write-Protects the Clock and SRAM when VCC is Out-of-Tolerance ♦ Automatically Switches to B |
|
|
|
|
Maxim |
Serially Interfaced / 8-Digit LED Display Drivers ● 10MHz Serial Interface ● Individual LED Segment Control ● Decode/No-Decode Digit Selection ● 150μA Low-Power Shutdown (Data Retained) ● Digital and Analog Brightness Control ● Display Blanked on Power-Up ● Drive Common-Cathode LED Display ● Slew-Ra |
|
|
|
|
Maxim Integrated |
Rail-to-Rail Op Amps ● ● Single +2.5V to +5.5V Supply Voltage Range ● ● 50μA Quiescent Current per Amplifier ● ● 0.5μA (max) Shutdown Mode (MAX4481) ● ● Available in Space-Saving Packages • 5-Pin SC70 (MAX4480) • 6-Pin SC70 (MAX4481) • 8-Pin SOT23 (MAX4482) ● ● 105dB AVOL wit |
|
|
|
|
Maxim Integrated |
Overvoltage Protection Controllers include a 15kV ESD-protected input (when bypassed with a 1µF capacitor) and a shutdown pin (EN) to turn off the device (MAX4838/MAX4840/ MAX4842). All devices are offered in a small 6-pin SC70 package and are specified for operation from -40°C to +85 |
|
|
|
|
Maxim |
TTL Compatible CMOS Analog Switches Ordering Information PART TEMP RANGE PIN-PACKAGE DG300C/D 0°C to +70°C Dice DG300CJ 0°C to +70°C 14 Lead Plastic DIP DG300CWE 0°C to +70°C 16 Lead Wide SO DG300CK 0°C to +70°C 14 Lead CERDIP DG300BWE -25°C to +85°C 16 Lead Wide SO |
|
|
|
|
Silergy |
2.3V Minimum Input and 5.5V Maximum Output 3A Peak Current Synchronous Boost • 2.3-5.0V input voltage range • Adjustable output voltage from 2.5V to 5.5V • Pseudo-constant frequency: 1MHz • 3A peak current limit • Input under voltage lockout • Load disconnect during shutdown • Output over voltage protection • Low RDS(ON) (mai |
|
|
|
|
Maxim Integrated |
Class G Ceramic Speaker Driver a mono Class G power amplifier with an integrated inverting charge-pump power supply specifically designed to drive the high capacitance of a ceramic loudspeaker. The charge pump can supply greater than 700mA of peak output current at 5.5VDC, guarant |
|
Desde 2024. D4U Semiconductor.
|