MPS MP2 Hoja de datos

No.	parte #	Fabricante	Descripción
1	MP2888A	MPS	Multi-Phase PWM Controller  Programmable Multi-Phase up to 10 Phases  PWM-VID Interface Compatible with NVIDIA Open VReg Specification  PMBus/I2C Compliant (1MHz Bus Speed)  Pin Programmable for PMBus Address  Built-In EEPROM to Store Custom Configurations  Switching Fre
2	MP2329	MPS	Buck Converter include over-current protection (OCP), over-voltage protection (OVP), under-voltage protection (UVP), and thermal shutdown. The converter requires a minimal number of external components and is available in a QFN11 (2mmx2mm) package. FEATURES  Wide
3	MP2307	MPS	Synchronous Rectified Step-Down Converter • 3A Continuous Output Current 4A Peak Output Current • Wide 4.75V to 23V Operating Input Range • Integrated 100mΩ Power MOSFET Switches • Output Adjustable from 0.925V to 20V • Up to 95% Efficiency • Programmable Soft-Start • Stable with Low ESR Cer
4	MP2303A	MPS	Synchronous Rectified Step-Down Converter  3A Output Current  Wide 4.7V to 28V Operating Input Range  Integrated MOSFET Switches  Output Adjustable from 0.80V to 25V  Up to 95% Efficiency  Programmable Soft-Start  Stable with Low ESR Ceramic Output Capacitors  Fixed 360kHz Frequency
5	MP2321	MPS	Constant-On-Time Step-Down Converter include short-circuit protection (SCP), over-current protection (OCP), under-voltage protection (UVP), and thermal shutdown. The MP2321 requires a minimal number of readily available, standard, external components and is available in a space-saving Q
6	MP2762A	MPS	I2C-Controlled 6A Buck or Boost Charger include input over-voltage protection (OVP), battery OVP, system OVP, thermal shutdown, battery temperature protection, and a configured timer to prevent prolonged charging of a dead battery. To comply with IMVP8 specifications, the IC provides three
7	MP2145	MPS	Step-Down Switcher  Up to 6A Output Current  Wide 2.8V-to-5.5V Operating Input Range  20mΩ and 12mΩ Internal Power MOSFETs  40µA Quiescent Current  1.2MHz Fixed Switching Frequency  100% Duty Cycle in Dropout  1% Feedback Accuracy  External Mode Control  Exter
8	MP2316	MPS	COT Step-Down Converter include SCP, OCP, UVP, and thermal shutdown. The MP2316 requires a minimal number of readily available standard external components with a space saving 2mmx3mm 14-pin QFN package. FEATURES  4V to 19V Operating Input Range  3A Output Current  40μA
9	MP2322	MPS	Step-Down Converter include over-current protection (OCP), over-voltage protection (OVP), and thermal shutdown. The MP2322 requires a minimal number of readily available, standard, external components and is available in a space-saving QFN-8 (1.5mmx2mm) package. FEATUR
10	MP28257	MPS	Synchronous Step-Down Converter  Wide 4.2V-to-20V Operating Input Range  4A Continuous Output Current  Internal 120mΩ High-Side, 50mΩ Low- Side Power MOSFETs  Stable with Ceramic Output Capacitors  Proprietary Switching Loss-Reduction Technology  Power-Good Indicator  Soft S
11	MP2460	MPS	Synchronous Step-Down Converter such as cycle-by-cycle current limiting, shortcircuit protection (SCP) with hiccup mode, and thermal shutdown in the event of excessive power dissipation. The MP2460 is available in a TSOT23-6 package. FEATURES  Low-Dropout Mode  Wide 4.5V to 45V
12	MP2108	MPS	Synchronous Buck Converter  2A Output Current  Synchronous Rectification  Internal 160mΩ and 190mΩ Power Switches  Input Range of 2.6V to 6V  Over 95% Efficiency  Under Voltage Lockout Protection  Soft-Start Operation  Thermal Shutdown  Internal Current Limit (Source
13	MP2269	MPS	Step-Down Converter  Wide 3.3V to 30V Operating Voltage Range  1A Continuous Output Current  1μA Low Shutdown Supply Current  12μA Sleep Mode Quiescent Current  180mΩ/80mΩ High-Side/Low-Side RDS(ON) for Internal Power MOSFETs  350kHz to 2.5MHz Programmable Switchi
14	MP2019	MPS	Low Quiescent Current Adjustable Output Linear Regulator  3V to 40V Input Range  10µA Quiescent Supply Current  Stable with Low-Value Output Ceramic Capacitor (> 0.47μF)  300mA Specified Current  Fixed 5V, 3.3V, and Adjustable Output (1.2 V to 15 V) Versions  Output ±2% Accuracy Over Temperature  Sp
15	MP2167A	MPS	Synchronous Buck Converter including soft start, an external SYNC clock, enable control, and a power good indicator. In addition, the MP2167A provides over-current protection (OCP) with valley current detection to avoid current runaway, short-circuit protection (SCP), reliabl
16	MP2315	MPS	500kHz Synchronous Step Down Converter include OCP and N 3 thermal shut down. E N 9 The MP2315 requires a minimum number of readily available standard external components M IG 3 and is available in a space saving 8-pin TSOT23 package. ECOMW DETSO MP2 TYPICAL APPLICATION FEATURES  Wide 4
17	MP2005	MPS	ULDO Linear Regulator of MP2005 include thermal overload and current limit protection, stability with ultra low ESR ceramic capacitors as low as 1μF, and fast transient response. The MP2005 is available in a 8-pin QFN (2mm x 3mm) package. TYPICAL APPLICATION FEATURES  W
18	MP2637	MPS	2.5A Single Cell Switch Mode Battery Charger include charge termination and auto-recharge. This device also integrates both input current limit and input voltage regulation in order to manage input power and meet the priority of the system power demand. In the absence of an input source, the MP
19	MP2015A	MPS	Low Quiescent Current Linear Regulator  2.5V to 24V Input Range  3.3µA Quiescent Supply Current  Stable With low-value output ceramic capacitor (> 0.47μF)  150mA specified current for QFN-6 and QFN-8 Packages  100mA specified current for TSOT23-4 Packages  700mV Dropout at 150mA Loa
20	MP2104	MPS	600mA Synchronous Step-Down Converter  High Efficiency: Up to 95%  1.7MHz Constant Switching Frequency  600mA Available Load Current  2.5V to 6V Input Voltage Range  Output Voltage as Low as 0.6V  100% Duty Cycle in Dropout  Current Mode Control  Short Circuit Protection  Therma