No. | parte # | Fabricante | Descripción | Hoja de Datos |
---|---|---|---|---|
|
|
ETC |
ELECTROMAGNETIC BUZZER ℃ ~ +80℃ DATE: 2000.02.18 PAGE: 1/5 PRODUCT SPECIFICATION ALP1205S (ELECTROMAGNETIC BUZZER) CUSTOMER: PRODUCER: 4. RELIABILITY TEST NO. ITEM TESTING CONDITION VARIANCE AFTER TEST 4-1 HUMIDITY 55+/-5℃,95+/-3%RH 96HRS SOUND PRESSURE LEVEL INI |
|
|
|
ETCTI |
Two 1-Bit LVTTL-to-GTLP Adj-Edge-Rate Bus Xcvrs w/ Split LVTTL Port FB Path (Rev. C) |
|
|
|
ETC |
TFT LCD Active Screen Size Outline Dimension Pixel Pitch Pixel Format Color Depth Luminance, White Power Consumption Weight Display Operating Mode Surface Treatment RoHS Comply 15.6 inches diagonal 359.3(H, typ.) × 209.5(V, typ.) × 5.7(D,max) [mm] 0.2151 mm |
|
|
|
ETC |
TFT LCD Active Screen Size Outline Dimension Pixel Pitch Pixel Format Color Depth Luminance, White Power Consumption Weight Display Operating Mode Surface Treatment RoHS Compliance BFR / PVC / As Free Ver. 0.0 15.4 inches diagonal 342.85(H, Typ.) × 220.84(V, |
|
|
|
ETCTI |
2-BIT LVTTL-TO-GTL ADJUSTABLE-EDGE-RATE BUS TRANSCEIVER (Rev. F) |
|
|
|
ETC |
Precision Adjustable Shunt Reference ¥ ¥ ¥ ¥ ¥ ¥ ¥ Temperature-compensated: 30 ppm/¡C Trimmed 0.4% bandgap reference Internal amplifier with 150 mA capability Temperature range: Extended to Ð55 to125¡C Low frequency dynamic output impedance: < 150 m½ Low output noise Robust ESD protec |
|
|
|
ETC |
Range of Hybrid Linear Potentiometers .5mm total in retracted position (multi output units) –30 to +100 To MIL-R-39023 grade C 0.1% Greater than 100MΩ at 500Vdc Voltage divider only - see Circuit Recommendations on page 2 Minimum of 100MΩ x track resistance or 0.5MΩ (whichever is greater |
|
|
|
ETC |
LCD MODULE |
|
|
|
ETC |
LCD Module 26 GND 26 GND 26 connector J2 / J1 Function LCDVCC LCDVCC GND GND A0A0+ GND A1A1+ GND A2A2+ GND CLK1CLK1+ GND Remarks +3.3V +3.3V Twisted pair no 4 Twisted pair no 4 Twisted pair no 3 Twisted pair no 3 Twisted pair no 2 Twisted pair no 2 Twisted |
|
|
|
ETC |
LCD Module er ADA-LP141X1, +12V 3 GND Black Adapter ADA-LP141X1, GND 4 GND Black Adapter ADA-LP141X1, GND 5 Sleep Orange Adapter ADA-LP141X1, 3.3V (controlled as DIVCC) 6 BLBRT Green Pot. pin 2 (centre) 7 AGND White Pot. pin 1 8 VREF Purple Pot. pin 3 3.3V poin |
|
|
|
ETC |
LCD Module |
|
|
|
ETC |
LCD Module |
|
|
|
ETC |
LCD |
|
|
|
ETC |
LCD |
|
|
|
ETC |
LCD nnection 39 VCC 39 1 VCC 3.3 Volt 40 VCC 40 2 VCC 3.3 Volt 41 NC 41 - No connection DataSheet 4 U .com www.DataSheet4U.com DataSheet 4 U .com |
|
|
|
ETC |
TFT LCD Active Screen Size Outline Dimension Pixel Pitch Pixel Format Color Depth Luminance, White Power Consumption Weight Display Operating Mode Surface Treatment RoHS Compliance BFR / PVC / As Free Ver. 0.0 15.4 inches diagonal 342.85(H, Typ.) × 220.84(V, |
|
|
|
Texas Instruments |
LOW-POWER MULTIPLE RS-232 DRIVERS AND RECEIVERS ption The SN75LP185A is a low-power bipolar device containing three drivers and five receivers with 15 kV of ESD protection on the bus pins with respect to each other. Bus pins are defined as those pins that tie directly to the serial-port connector |
|
|
|
Texas Instruments |
Low-Dropout Voltage Regulator a TTL/CMOS-compatible enable terminal, which can be used to switch the device into standby mode. This feature reduces power consumption when the instrument is not VBAT 0.1 µF INPUT OUTPUT TL75LPxxQ GND/ ENABLE HEAT SINK VO ± 2% at 300 mA CO = |
|
|
|
Texas Instruments |
Low-Dropout Voltage Regulator a TTL/CMOS-compatible enable terminal, which can be used to switch the device into standby mode. This feature reduces power consumption when the instrument is not VBAT 0.1 µF INPUT OUTPUT TL75LPxxQ GND/ ENABLE HEAT SINK VO ± 2% at 300 mA CO = |
|
|
|
ETCTI |
Low-Power Multiple RS-232 Drivers And Receivers (Rev. A) |
|