SMBJ7.5CA |
Part Number | SMBJ7.5CA |
Manufacturer | Littelfuse (https://www.littelfuse.com/) |
Description | The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Bi-directional Agency Approvals Agency Agency File Number E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power . |
Features |
• Excellent clamping capability • Low incremental surge resistance • Typical IR less than 1μA when VBR min>12V • For surface mounted applications to optimize board space • Low profile package • Typical failure mode is short from over-specified voltage or current • Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c • IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact) • ESD protection of data lines in accordance with IEC 61000-4-2 • EFT protection of data lines in accordance with IEC 61000-4-4 • Built-in strain relief • Fast response time: typically less than 1.0ps from 0V. |
Datasheet |
SMBJ7.5CA Data Sheet
PDF 972.08KB |
Distributor | Stock | Price | Buy |
---|
SMBJ7.5CA |
Part Number | SMBJ7.5CA |
Manufacturer | TAITRON |
Title | Transient Voltage Suppressor |
Description | Stand-Off Voltage Peak Pulse Power Dissipation on 10/1000 us waveform Peak Pulse current on 10/1000 us waveform Steady State Power Dissipation Peak Forward Surge Current Maximum Instantaneous Forward Voltage Operating and Storage 3.5 5.0 -55 to 150 Value 5.0 to 170 600 Minimum See Table 5.0 100 Unit. |
Features | z Stand-off voltage from 5.0 to 170 volts z 600W Peak Pulse Power capability on 10/1000 µs waveform repetition rate(duty cycle): 0.01% z Fast response time: typically less than 1.0ps from 0v to VBR z Low incremental surge resistance, excellent clamping capability z z z z Typical IR less than 1 uA above 10V High temperature soldering guaranteed:250°C/10 seconds at terminals This series is UL recogn. |
SMBJ7.5CA |
Part Number | SMBJ7.5CA |
Manufacturer | Diodes |
Title | 600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR |
Description | Green SMBJ5.0(C)A - SMBJ170(C)A 600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features • • • • • • • • 600W Peak Pulse Power Dissipation 5.0V - 170V Standoff Voltages Glass Passivated Die Construction Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time. |
Features |
• • • • • • • • 600W Peak Pulse Power Dissipation 5.0V - 170V Standoff Voltages Glass Passivated Die Construction Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Lead Free Finish/RoHS Compliant (Note 1) Green Molding Compound (No Halogen and Antimony) (Note 2) Mechanical Data • • • • • • • • Case: SMB Case Material: Molded Plastic. UL Flammability Class. |
SMBJ7.5CA |
Part Number | SMBJ7.5CA |
Manufacturer | MCC |
Title | 600Watt TVS |
Description | SMBJ5.0 THRU SMBJ440CA E480232 Features • For Surface Mount Applicationsin Order to Optimize Board Space • Low Inductance • Fast Response Time: Typical Less than 1ps From 0V to VBR min • Halogen Free. “Green” Device (Note 1) • Moisture Sensitivity Level 1 • Epoxy Meets UL 94 V-0 Flammability Ratin. |
Features |
• For Surface Mount Applicationsin Order to Optimize Board Space • Low Inductance • Fast Response Time: Typical Less than 1ps From 0V to VBR min • Halogen Free. “Green” Device (Note 1) • Moisture Sensitivity Level 1 • Epoxy Meets UL 94 V-0 Flammability Rating • Lead Free Finish/RoHS Compliant (Note 2) ("P" Suffix Designates RoHS Compliant. See Ordering Information) • For Bidirectional Devices Add . |
SMBJ7.5CA |
Part Number | SMBJ7.5CA |
Manufacturer | EIC |
Title | BI-DIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR |
Description | TH97/2478 TH09/2479 IATF 0113686 SGS TH07/1033 SMBJ5.0C - 188CA Stand-off Voltage : 5.0 to 188V Peak Pulse Power : 600 W FEATURES : * 600W peak pulse power capability with a 10/1000µs waveform * Excellent clamping capability * Very fast response time * Pb / RoHS Free MECHANICAL DATA * Case : SMB . |
Features | : * 600W peak pulse power capability with a 10/1000µs waveform * Excellent clamping capability * Very fast response time * Pb / RoHS Free MECHANICAL DATA * Case : SMB Molded plastic * Epoxy : UL94V-0 rate flame retardant * Lead : Lead Formed for Surface Mount * Mounting position : Any * Weight : 0.108 gram SURFACE MOUNT BI-DIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR SMB (DO-214AA) 5.30 ± 0.22 4.65 . |
SMBJ7.5CA |
Part Number | SMBJ7.5CA |
Manufacturer | BOURNS |
Title | TVS Diode |
Description | UL File Number: E153537 Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) PPK 600 IFS. |
Features | n RoHS compliant* n Surface Mount SMB package n Standoff Voltage: 5 to 495 volts n Power Dissipation: 600 watts Applications n IEC 61000-4-2 ESD (Min. Level 4) n IEC 61000-4-4 EFT n IEC 61000-4-5 Surge SMBJ Transient Voltage Suppressor Diode Series General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop inc. |
SMBJ7.5CA |
Part Number | SMBJ7.5CA |
Manufacturer | SEMTECH |
Title | 1-Line ESD Protection |
Description | Features SMBJXXCA are designed to protect sensitive electronics from damage or latch-up due to EOS, lightning, CDE, and ESD. They feature large cross-sectional area junctions for conducting high transient currents. These devices offer desirable characteristics for board level protection including . |
Features | SMBJXXCA are designed to protect sensitive electronics from damage or latch-up due to EOS, lightning, CDE, and ESD. They feature large cross-sectional area junctions for conducting high transient currents. These devices offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. SMBJXXCA series may be used. |
SMBJ7.5CA |
Part Number | SMBJ7.5CA |
Manufacturer | LITE-ON |
Title | SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS |
Description | LITE-ON SEMICONDUCTOR SMBJ SERIES SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS STAND-OFF VOLTAGE - 5.0 to 170 Volts POWER DISSIPATION - 600 WATTS FEATURES For surface mounted applications Reliable low cost construction utilizing molded plastic technique Plastic ma. |
Features | For surface mounted applications Reliable low cost construction utilizing molded plastic technique Plastic material has UL flammability classification 94V-O Typical IR less than 1uA above 10V Fast response time: typically less than 1.0ns for Uni-direction,less than 5.0ns for Bi-direction,form 0 Volts to BV min MECHANICAL DATA Case : Molded plastic Polarity : by cathode band denotes uni-directional. |
SMBJ7.5CA |
Part Number | SMBJ7.5CA |
Manufacturer | Multicomp |
Title | Transient Voltage Suppressor |
Description | Transient Voltage Suppressor: SMBJ5.0 - SMBJ440CA Features: tGlass passivated junction tLow incremental surge resistance, excellent clamping capability t600W peak pulse power capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.01% tVery fast response time tHigh temperature so. |
Features | tGlass passivated junction tLow incremental surge resistance, excellent clamping capability t600W peak pulse power capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.01% tVery fast response time tHigh temperature soldering guaranteed: 250oC/10 secs at terminals DO-214AA(SMB) 4.7± 0.25 2.0± 0.15 Mechanical Data: tCase: JEDEC DO-214AA moulded plastic over glass passivate. |
SMBJ7.5CA |
Part Number | SMBJ7.5CA |
Manufacturer | AiT Semiconductor |
Title | TRANSIENT VOLTAGE SUPPRESSOR |
Description | FEATURES The SMBJ series support both Uni and Bi-direction. Available in SMB Package ORDERING INFORMATION Package Type SMB Part Number Uni Bi SMBJ5.0 SMBJ5.0C SMBJ5.0A SMBJ5.0CA SMBJ6.0 SMBJ6.0C SMBJ6.0A SMBJ6.0CA SMBJ6.5 SMBJ6.5C SMBJ6.5A SMBJ6.5CA SMBJ7.0 SMBJ7.0C SMBJ7.0A . |
Features |
The SMBJ series support both Uni and Bi-direction. Available in SMB Package ORDERING INFORMATION Package Type SMB Part Number Uni Bi SMBJ5.0 SMBJ5.0C SMBJ5.0A SMBJ5.0CA SMBJ6.0 SMBJ6.0C SMBJ6.0A SMBJ6.0CA SMBJ6.5 SMBJ6.5C SMBJ6.5A SMBJ6.5CA SMBJ7.0 SMBJ7.0C SMBJ7.0A SMBJ7.0CA SMBJ7.5 SMBJ7.5C SMBJ7.5A SMBJ7.5CA SMBJ8.0 SMBJ8.0C SMBJ8.0A SMBJ8.0CA SMBJ8.5 SMBJ8.5C . |
No. | Parte # | Fabricante | Descripción | Hoja de Datos |
---|---|---|---|---|
1 | SMBJ7.5C |
AiT Semiconductor |
TRANSIENT VOLTAGE SUPPRESSOR | |
2 | SMBJ7.5C |
EIC |
BI-DIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR | |
3 | SMBJ7.5C |
MCC |
600Watt TVS | |
4 | SMBJ7.5C |
SeCoS |
600W Peak Power Surface Mount TVS | |
5 | SMBJ7.5C |
Littelfuse |
TVS Diode | |
6 | SMBJ7.5C |
Multicomp |
Transient Voltage Suppressor | |
7 | SMBJ7.5CA-HR |
Littelfuse |
Transient Voltage Suppression Diodes | |
8 | SMBJ7.5CA-HRA |
Littelfuse |
Transient Voltage Suppression Diodes | |
9 | SMBJ7.5CACR-C |
SeCoS |
Power Surface Mount TVS | |
10 | SMBJ7.5 |
AiT Semiconductor |
TRANSIENT VOLTAGE SUPPRESSOR |