NCP102 |
Part Number | NCP102 |
Manufacturer | ON Semiconductor (https://www.onsemi.com/) |
Description | Pin Symbol Name Description 1 EN Enable Input (Active High). Pull the EN pin below 0.8 V to disable the regulator and enter the standby mode operation. 2 GND Ground 3 FB Inverting input of the error amplifier. The output voltage is sampled by means of a resistor divider and ap‐ plied to this pin for regulation. 4 SOFT-S Programmable soft-start. |
Features |
of the NCP102 are a dedicated enable input, internally compensated error amplifier and an adjustable soft-start. A minimum drive capability of ±5 mA provides fast transient response. The drive current is internally limited to protect the controller in case of an external MOSFET failure. The NCP102 is packaged in a space saving TSOP-6.
Features
•ă4.5 V to 13.5 V Supply Voltage Range •ă0.8 V (±2%) Voltage Reference (Temperature and Process) •ăProgrammable Regulator Output Voltage Down to 0.8 V •ăDrive Current Capability of > ±5ĂmA •ăMLCC and POSCAP Compatible •ăProgrammable Soft-Start •ăEnable A. |
Datasheet |
NCP102 Data Sheet
PDF 178.37KB |
Distributor | Stock | Price | Buy |
---|
No. | Parte # | Fabricante | Descripción | Hoja de Datos |
---|---|---|---|---|
1 | NCP100 |
ON Semiconductor |
Sub 1.0V Precision Adjustable Shunt Regulator | |
2 | NCP1000 |
ON Semiconductor |
Integrated Off-Line Switching Regulator | |
3 | NCP1001 |
ON Semiconductor |
Integrated Off-Line Switching Regulator | |
4 | NCP1002 |
ON Semiconductor |
Integrated Off-Line Switching Regulator | |
5 | NCP1010 |
ON Semiconductor |
Self-Supplied Monolithic Switcher | |
6 | NCP1011 |
ON Semiconductor |
Self-Supplied Monolithic Switcher | |
7 | NCP1012 |
ON Semiconductor |
Self-Supplied Monolithic Switcher | |
8 | NCP1013 |
ON Semiconductor |
Self-Supplied Monolithic Switcher | |
9 | NCP1014 |
ON Semiconductor |
Self-Supplied Monolithic Switcher | |
10 | NCP1015 |
ON Semiconductor |
Self-Supplied Monolithic Switcher |