MPD-425C |
Part Number | MPD-425C |
Manufacturer | BOSER Technology |
Description | MPD-425C Industrial Power Supply 250W DC-DC Power Supply Input Range: 19~32VDC 2.0 11.0 TO SWITCH 0.42 0.35 0.4 DC OUTPUT WIRES 14.4 DC-DC 0.5 13.8 4-TAPPING #6-32 6.4 2.7 1.6 0.5 11.5 ... |
Features |
*Input Voltage: 19~32VDC *Input Current: Max. 8A at 24VDC *Inrush Current: Does not exceed 10A at 24VDC input, cold start at 25oC *Ripple and Noise: < +/-1% peak to peak ripple and noise for each output *Line Regulation: < +/-1% at rated load with +/-10% change in input voltage *Load Regulation: +/-4% for +5V, +/-5% for +12V, +/-3% for -12V and -5V *Power Good Signal: Goes high 100~500ms after all DC output are ready *Power Failure: Goes low 0.5ms before any DC output falls *Efficiency: 70% typical at nominal line and rated load *Altitude: 10,000 feet *Protection: Input: Protection against wro... |
Document |
MPD-425C Data Sheet
PDF 75.25KB |
Similar Datasheet
No. | Parte # | Fabricante | Descripción | Hoja de Datos |
---|---|---|---|---|
1 | MPD-425V |
ETC |
250W DC-DC POWER SUPPLY INPUT RANGE: 40 ~ 57VDC | |
2 | MPD-810H |
BOSER Technology |
120W 10~30VDC DC-DC ATX Open Frame Power-Supply | |
3 | MPD-830R |
BOSER Technology |
300W DC-DC ATX Power Supply | |
4 | MPD100 |
Microsemi Corporation |
(MPD100 - MPD400) STABISTORS Also / Tight Tolerance | |
5 | MPD100 |
Digitron Semiconductors |
TIGHT TOLERANCE STABISTORS | |
6 | MPD100A |
Digitron Semiconductors |
TIGHT TOLERANCE STABISTORS |