logo

PM6602 ST Microelectronics 8-row 30-mA LED driver Datasheet

PM6-60-2305-G Switching Power Supplies PFC Mini RoHS


ST Microelectronics
PM6602
Part Number PM6602
Manufacturer STMicroelectronics (https://www.st.com/)
Description The PM6602 consists of a high-efficiency monolithic boost converter and eight controlled current generators (ROWs), specifically designed to supply LED arrays used in the backlights of LCD panels. The device can manage a nominal output voltage of up to 36 V. The generators can be externally programm...
Features

■ 2 dimming modes: SMBus or PWM Boost section
  – 3.3 V to 28 V input voltage range
  – Internal power MOSFET
  – Internal +3.3 V LDO for device supply
  – Up to 36 V output voltage
  – Constant frequency peak current mode control
  – 500 kHz to 2 MHz adjustable switching frequency
  – Pulse-skip power saving mode at light loads
  – Built-in soft-start feature
  – Programmable OVP protection
  – Stable with ceramic output capacitors
  – Thermal shutdown Backlight driver section
  – 8 rows with 30 mA maximum current capability (adjustable)
  – Row disabling option
  – 500 ns minimum dimming time (1% minimum dimming dut...

Document Datasheet PM6602 datasheet pdf (557.60KB)
Distributor Distributor
Mouser Electronics
Stock 0 In Stock
Price
No price available
BuyNow (No Longer Stocked Vicor Corporation)




PM6602 Distributor

part
Vicor Corporation
PM6-60-2305-G
Switching Power Supplies PFC Mini RoHS
No price available
Distributor
Mouser Electronics

0 In Stock
No Longer Stocked





PM6602 Similar Datasheet

Part Number Description
PM66
manufacturer
Protek Devices
51-65 WATT MEDICAL SWITCHING POWER SUPPLIES
PROTEK 51-65 WATT MEDICAL SWITCHING POWER SUPPLIES PM66 SERIES ( LV D ) RoHS DE S CR I PT IO N The PM66 series of compact, open PCB constructed, AC-DC switching power supplies are capable of delivering 51 to 65 watts of continuous power. They operate at 90 to 264VAC input voltage without the need of voltage selection. They are ideally suited for use in medical equipment not for life support. All models meet the safety requirements of UL, CSA and IEC. F E AT U R E S www.DataSheet4U.com • Recognized or certified by UL,CS A and TÜV • Small size • 100% burn-in • W i d e i n p u t r a n g e 9 0 t o 2 6 4 VAC • Input surge current protection • O v e r v o l ta g e p r o t e c t i o n • Overcurr...
PM6600
manufacturer
STMicroelectronics
6-rows 30 mA LEDs driver
The PM6600 consists of a high efficiency monolithic boost converter and six controlled current generators (ROWs), specifically designed to supply LEDs arrays used in the backlight of LCD panels. The device can manage a nominal output voltage up to 36 V (i.e. 10 White-LEDs per ROW). The generators can be externally programmed to sink up to 30 mA and they can be dimmed via a PWM signal (1% dimming dutycycle at 20 kHz can be managed). The device allows to detect and manage the open and shorted LED faults and to let unused ROWs floating. Basic protections (Output Over-Voltage, internal MOSFET Over-Current and Thermal Shutdown) are provided. Backlight driver section – Six rows with 30 mA maximum...
PM6610
manufacturer
STMicroelectronics
2 to 4-cell Li-ion Li-FePO4 battery charger
PM6610 2 to 4-cell Li-ion, Li-FePO4 battery charger with SMBus interface, N-channel RBFET and BATFET MOSFET selectors Data brief Features ■ Buck converter – Synchronous buck converter with N- channel high-side, low-side Power )MOSFET integrated drivers t(s– 350 kHz or 700 kHz switching frequency, selectable with SMBus uc– AC adapter input voltage range 9 V - 24 V d– 5 V bias input voltage supply ro– Battery charge voltage range 2.5 V - 18 V P– ±0.5% charge voltage accuracy te– 0.1% cell charge voltage resolution le– ±3% charge current accuracy so– Overvoltage, overcurrent protection b– Battery, inductor, Power MOSFET shortOcircuit protection -– Internal loop compensation network t(s)– In...
PM6641
manufacturer
STMicroelectronics
Monolithic VR for chipset and DDR2/3 supply
The PM6641 is a monolithic voltage regulator module specifically designed to supply DDR2/3 memory and chipset in ultra-mobile PC and real estate constrained portable systems. It integrates three independent, adjustable, constant frequency buck converters, a ±2 Apk Low Drop-Out (LDO) linear regulator and a ±15 mA low noise buffered reference. Each regulator provides basic UV and OV Protections, programmable Soft-Start and Current Limit and active Soft-End. Pulse-Skipping technique is performed to increase efficiency at very light load. Applications ■ ■ ■ DDR2/3 memory and chipset supply UMPC and portable equipment Handheld and PDAs Table 1. Device summary Part number PM6641 PM6641TR Januar...
PM6644
manufacturer
STMicroelectronics
350mA adjustable step-down regulator
The PM6644 is a 350 mA valley current limit stepdown regulator capable of delivering an adjustable output voltage in the range between 0.9 V and 8 V. A fixed value of output voltage is also available (3.47 V), saving the external resistor divider. It is housed in a small DFN10 3x3 package. The switching regulator is based on COT (constant-on-time) architecture, that assures fast load transient response; the embedded voltage feed-forward provides nearly constant switching frequency operation. The pulse skipping technique increases efficiency at very light load. The switching frequency can be adjusted from 200 kHz to 600 kHz through a simple resistor. The Table 1. Device summary Part number PM...
PM6652
manufacturer
STMicroelectronics
Single-phase Switching DC-DC Controllers & Smart Regulators
The PM6652 is a single phase, step-down SMPS controller with high precision 7 bit DAC. It has been designed to supply the CPU and the graphics core (render engine) of the Intel® mobile platform, according with Intel MVP6.5 specifications. The PM6652 can also be configured to supply the 7-bit family, VR11 compliant, ATOM® processors. The controller, based on constant on-time (COT) architecture, allows real-time dynamic switching of the core operating voltages and frequencies, working in both performance and suspend render states. An embedded integrator control loop compensates the DC voltage error due to the output ripple. The high efficiency at light load, achieved with pulse skipping workin...
PM6670
manufacturer
STMicroelectronics
Complete DDR2/3 memory power supply controller
The device PM6670 is a complete DDR2/3 power supply regulator designed to meet JEDEC specifications. It integrates a Constant On-Time (C.O.T.) buck controller, a 2Apk sink/source Low Drop Out regulator and a 15mA low noise buffered reference. The C.O.T. architecture assures fast transient response supporting both electrolytic and ceramic output capacitors. An embedded integrator control loop compensates the DC voltage error due to the output ripple. The 2Apk sink/source linear regulator provides the memory termination voltage with fast load transient response. The device is fully compliant with system sleep states S3 and S4/S5, providing LDO output high impedance in Suspend-To-RAM and Tracki...
PM6670A
manufacturer
ST Microelectronics
Complete DDR2/3 Memory Power Supplies Controller
The device PM6670A is a complete DDR2/3 power supply regulator designed to meet JEDEC specifications. It integrates a Constant On-Time (C.O.T.) buck controller, a 2Apk sink/source Low Drop Out regulator and a 15mA low noise buffered reference. The C.O.T. architecture assures fast transient response supporting both electrolytic and ceramic output capacitors. An embedded integrator control loop compensates the DC voltage error due to the output ripple. The 2Apk sink/source linear regulator provides the memory termination voltage with fast load transient response. The device is full compliant with system sleep states S3 and S4/S5, providing LDO output high impedance in Suspend-To-RAM and Tracki...
PM6675A
manufacturer
ST Microelectronics
High Efficiency Step Down Controller
The PM6675A device consists of a single high efficiency step-down controller and an independent Low Drop-Out (LDO) linear regulator. The Constant On-Time (COT) architecture assures fast transient response supporting both electrolytic and ceramic output capacitors. An embedded integrator control loop compensates the DC voltage error due to the output ripple. Selectable low-consumption mode allows the highest efficiency over a wide range of load conditions. The low-noise mode sets the minimum switching frequency to 33kHz for audio-sensitive applications. The LDO linear regulator can sink and source up to 2Apk. Two fixed current limit (±1A- ±2A) can be chosen. An active Soft-End is independentl...




logo    Since 2024. D4U Semiconductor.   |   Contact Us   |   Privacy Policy