TDA8443A |
Part Number | TDA8443A |
Manufacturer | NXP (https://www.nxp.com/) |
Description | The TDA8443A is a general purpose two-channel switch for YUV or RGB signals. One channel provides matrixing from RGB to YUV, which can be bypassed. The IC is controlled via I2C-bus by seven different ... |
Features |
• Two RGB/YUV selectable clamped inputs with associated synchronization • RGB/YUV matrix • 3-state switching with an OFF-state • Selectable gain • I2C-bus or non-I2C-bus mode • Address selection for 7 devices • Fast switching. GENERAL DESCRIPTION The TDA8443A is a general purpose two-channel switch for YUV or RGB signals. One channel provides matrixing from RGB to YUV, which can be bypassed. The IC is controlled via I2C-bus by seven different addresses or can be used in a non-I2C-bus mode. In the non-I2C-bus mode, control of the circuit is achieved by DC voltages. QUICK REFERENCE DATA SYMBOL V... |
Document |
TDA8443A Data Sheet
PDF 124.28KB |
Similar Datasheet
No. | Parte # | Fabricante | Descripción | Hoja de Datos |
---|---|---|---|---|
1 | TDA8440 |
NXP |
Switch for CTV receivers | |
2 | TDA8442 |
NXP |
I2C-bus interface for colour decoders | |
3 | TDA8444 |
NXP |
Octuple 6-bit DACs with I2C-bus | |
4 | TDA8444AT |
NXP |
Octuple 6-bit DACs with I2C-bus | |
5 | TDA8444T |
NXP |
Octuple 6-bit DACs with I2C-bus | |
6 | TDA8446 |
NXP |
Fast RGB/YC switch for digital decoding |