SN54ABT16843 |
Part Number | SN54ABT16843 |
Manufacturer | Texas Instruments (https://www.ti.com/) |
Description | The ’ABT16843 18-bit bus-interface D-type latches are designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer regi... |
Features |
.
A buffered output-enable (OE) input can be used to place the nine outputs in either a normal logic state (high or low logic levels) or a high-impedance state. The outputs are in the high-impedance state during power up and power down. The outputs remain in the high-impedance state while the device is powered down. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for interface or pullup components.
SN54ABT16843, SN74ABT16843 18-BIT BUS-INTERFACE D-TY... |
Document |
SN54ABT16843 Data Sheet
PDF 241.34KB |
Similar Datasheet
No. | Parte # | Fabricante | Descripción | Hoja de Datos |
---|---|---|---|---|
1 | SN54ABT16841 |
Texas Instruments |
20-BIT BUS-INTERFACE D-TYPE LATCHES | |
2 | SN54ABT16821 |
Texas Instruments |
20-BIT BUS-INTERFACE FLIP-FLOPS | |
3 | SN54ABT16823 |
Texas Instruments |
18-BIT BUS-INTERFACE FLIP-FLOPS | |
4 | SN54ABT16825 |
Texas Instruments |
18-BIT BUFFERS/DRIVERS | |
5 | SN54ABT16827 |
Texas Instruments |
20-BIT BUFFERS/DRIVERS | |
6 | SN54ABT16833 |
Texas Instruments |
DUAL 8-BIT TO 9-BIT PARITY BUS TRANSCEIVERS |