54HCT373 |
Part Number | 54HCT373 |
Manufacturer | Texas Instruments (https://www.ti.com/) |
Description | ordering information The ’HCT373 devices are octal transparent D-type latches. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is low, the Q outputs are lat... |
Features |
-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components.
OE does not affect the internal operations of the latches. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
ORDERING IN... |
Document |
54HCT373 Data Sheet
PDF 1.30MB |
Similar Datasheet
No. | Parte # | Fabricante | Descripción | Hoja de Datos |
---|---|---|---|---|
1 | 54HCT374 |
Texas Instruments |
Octal D-Type Flip-Flop | |
2 | 54HCT377 |
Texas Instruments |
Octal D-Type Flip-Flop | |
3 | 54HCT30 |
Texas Instruments |
8-Input NAND Gate | |
4 | 54HCT32 |
Texas Instruments |
Quad 2-Input OR Gate | |
5 | 54HCT367 |
Texas Instruments |
Three-State Non-Inverting and Inverting | |
6 | 54HCT368 |
Texas Instruments |
Three-State Non-Inverting and Inverting |