logo

TPA3116 Texas Instruments Filter-Free Class-D Stereo Amplifier Datasheet

TPA3116D2EVM EVAL MODULE FOR TPA3116D2


Texas Instruments
TPA3116
TPA3116
Part Number TPA3116
Manufacturer Texas Instruments (https://www.ti.com/)
Description The TPA31xxD2 series are stereo efficient, digital amplifier power stage for driving speakers up to 100 W / 2 Ω in mono. The high efficiency of the TPA3130D2 allows it to do 2 × 15 W without external heat sink on a single layer PCB. The TPA3118D2 can even run 2 × 30 W / 8 Ω without heat sink on a du...
Features
•1 Supports Multiple Output Configurations
  – 2 × 50 W Into a 4-Ω BTL Load at 21 V (TPA3116D2)
  – 2 × 30 W Into a 8-Ω BTL Load at 24 V (TPA3118D2)
  – 2 × 15 W Into a 8-Ω BTL Load at 15 V (TPA3130D2)
• Wide Voltage Range: 4.5 V to 26 V
• Efficient Class-D Operation
  – >90% Power Efficiency Combined With Low Idle Loss Greatly Reduces Heat Sink Size
  – Advanced Modulation Schemes
• Multiple Switching Frequencies
  – AM Avoidance
  – Master and Slave Synchronization
  – Up to 1.2-MHz Switching Frequency
• Feedback Power-Stage Architecture With High PSRR Reduces PSU Requirements
• Programmable Power Limit
• D...

Document Datasheet TPA3116 datasheet pdf (2.86MB)
Distributor Distributor
DigiKey
Stock 4 In Stock
Price
1 units: 210 USD
BuyNow BuyNow BuyNow (Manufacturer a Texas Instruments)




TPA3116 Distributor

part
Texas Instruments
TPA3116D2DAD
AMP, CLASS-D, 26VIN, 2X50W, 32HTSSOP
10 units: 4704 KRW
1 units: 5194 KRW
Distributor
element14 Asia-Pacific

896 In Stock
BuyNow BuyNow
part
Texas Instruments
TPA3116D2EVM
EVAL MODULE FOR TPA3116D2
1 units: 210 USD
Distributor
DigiKey

4 In Stock
BuyNow BuyNow
Texas Instruments
TPA3116D2DADR
Audio Amplifiers 50W Stereo Class-D Audio Amp
1 units: 2.26 USD
10 units: 1.92 USD
100 units: 1.67 USD
250 units: 1.58 USD
500 units: 1.51 USD
1000 units: 1.43 USD
2000 units: 1.41 USD
Distributor
Mouser Electronics

58860 In Stock
BuyNow BuyNow
part
Texas Instruments
TPA3116D2DAD
Texas Instruments,TPA3116D2DAD,IC,Audio, TU
12 units: 34.13 HKD
Distributor
RS

141 In Stock
BuyNow BuyNow
part
Texas Instruments
TPA3116D2QDADRQ1
TPA3116D2-Q1 2-Ch, 50-W Analog Input Class-D Audio Amplifier
1000 units: 1.86 USD
500 units: 1.97 USD
100 units: 2.06 USD
25 units: 2.15 USD
1 units: 2.19 USD
Distributor
Rochester Electronics

500 In Stock
BuyNow BuyNow
part
Texas Instruments
TPA3116D2DAD
IC: audio amplifier; Pout: 100W; 4.5÷26VDC; Ch: 2; Amp.class: D; 4Ω
46 units: 2.59 USD
10 units: 3.1 USD
3 units: 3.77 USD
1 units: 4.03 USD
Distributor
TME

245 In Stock
BuyNow BuyNow
part
Texas Instruments
TPA3116D2QDADRQ1
IC AMP CLASS D STER 50W 32HTSSOP / 100-W and 50-W Class-D Stereo Automotive Amplifiers
12 units: 4.366 USD
28 units: 3.583 USD
44 units: 3.471 USD
60 units: 3.359 USD
77 units: 3.247 USD
104 units: 2.911 USD
Distributor
Win Source Electronics

64000 In Stock
BuyNow BuyNow





TPA3116 Similar Datasheet

Part Number Description
TPA3100D2
manufacturer
Texas Instruments
20-W STEREO CLASS-D AUDIO POWER AMPLIFIER
The TPA3100D2 is a 20-W (per channel) efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers. The TPA3100D2 can drive stereo speakers as low as 4 Ω. The high efficiency of the TPA3100D2, 92%, eliminates the need for an external heat sink when playing music. The gain of the amplifier is controlled by two gain select pins. The gain selections are 20, 26, 32, 36 dB. The outputs are fully protected against shorts to GND, VCC, and output-to-output shorts with an auto recovery feature and monitor output. TV Audio Processor 1 mF 1 mF 1 mF 1 mF Shutdown Control Mute Control Gain Select Sync Control Fault Flag 10 V to 26 V Simplified Application Circuit TPA3100D2 RINP...
TPA3100D2-Q1
manufacturer
Texas Instruments
20-W STEREO CLASS-D AUDIO POWER AMPLIFIER
The TPA3100D2 is a 20-W per channel, efficient, class-D audio power amplifier for driving bridged-tied stereo speakers. The TPA3100D2 can drive stereo speakers as low as 4 Ω. The high efficiency of the TPA3100D2, 92%, eliminates the need for an external heat sink when playing music. The gain of the amplifier is controlled by two gain select pins. The gain selections are 20 dB, 26 dB, 32 dB, or 36 dB. The outputs are fully protected against shorts to GND, VCC, and output-to-output shorts with an auto-recovery feature and monitor output.

TV Audio Processor 1 mF 1 mF 1 mF 1 mF Shutdown Control Mute Control Gain Select Sync Control Fault Flag 10 V to 26 V Simplified Application C...
TPA3101D2
manufacturer
Texas Instruments
10-W STEREO CLASS-D AUDIO POWER AMPLIFIER
The TPA3101D2 is a 10-W (per channel) efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers. The TPA3101D2 can drive stereo speakers as low as 4 Ω. The high efficiency of the TPA3101D2, 87%, eliminates the need for an external heat sink when playing music. The gain of the amplifier is controlled by two gain select pins. The gain selections are 20, 26, 32, 36 dB. The outputs are fully protected against shorts to GND, VCC, and output-to-output shorts with an auto recovery feature and monitor output. TV Audio Processor 1 mF 1 mF 1 mF 1 mF Shutdown Control Mute Control Gain Select Sync Control Fault Flag 10 V to 26 V Simplified Application Circuit TPA3101D2 RINP...
TPA3106D1
manufacturer
Texas Instruments
40-W MONO CLASS-D AUDIO POWER AMPLIFIER
The TPA3106D1 is a 40-W efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers. The TPA3106D1 can drive stereo speakers as low as 4Ω. The high efficiency, ~92%, of the TPA3106D1 eliminates the need for an external heat sink when playing music. The gain of the amplifier is controlled by two gain select pins. The gain selections are 20, 26, 32, 36 dB. The outputs are fully protected against shorts to GND, VCC, and output-to-output shorts with an auto recovery feature and monitor output. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers th...
TPA3107D2
manufacturer
Texas Instruments
15-W STEREO CLASS-D AUDIO POWER AMPLIFIER
The TPA3107D2 is a 15-W (per channel) efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers. The TPA3107D2 can drive stereo speakers as low as 6 Ω. The high efficiency of the TPA3107D2, 87%, eliminates the need for an external heat sink when playing music. The gain of the amplifier is controlled by two gain select pins. The gain selections are 20, 26, 32, 36 dB. The outputs are fully protected against shorts to GND, VCC, and output-to-output shorts with an auto recovery feature and monitor output. TV Audio Processor 1 mF 1 mF 1 mF 1 mF Shutdown Control Mute Control Gain Select Sync Control Fault Flag 10 V to 26 V Simplified Application Circuit TPA3107D2 RINP...
TPA311
manufacturer
Texas Instruments
350-mW MONO AUDIO POWER AMPLIFIER
D OR DGN PACKAGE (TOP VIEW) The TPA311 is a bridge-tied load (BTL) or single-ended (SE) audio power amplifier developed especially for low-voltage applications where internal speakers and external earphone operation are required. Operating with a 3.3-V SHUTDOWN 1 8 VO– BYPASS 2 7 GND SE/BTL 3 6 VDD IN 4 5 VO+ supply, the TPA311 can deliver 250-mW of continuous power into a BTL 8-Ω load at less than 1% THD+N throughout voice band frequencies. Although this device is characterized out to 20 kHz, its operation was optimized for narrower band applications such as cellular communications. The BTL configuration eliminates the need for external coupling capacitors on the output in most appl...
TPA3110D2
manufacturer
Texas Instruments
15-W Fil ter-Free Stereo Class-D Audio Power Amplifier
The TPA3110D2 is a 15-W (per channel) efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers. Advanced EMI Suppression Technology enables the use of inexpensive ferrite bead filters at the outputs while meeting EMC requirements. SpeakerGuard™ speaker protection circuitry includes an adjustable power limiter and a DC detection circuit. The adjustable power limiter allows the user to set a "virtual" voltage rail lower than the chip supply to limit the amount of current through the speaker. The DC detect circuit measures the frequency and amplitude of the PWM signal and shuts off the output stage if the input capacitors are damaged or shorts exist on the inputs. The T...
TPA3110D2-Q1
manufacturer
Texas Instruments
15-W Filter-Free Stereo Class-D Audio Power Amplifier
The TPA3110D2-Q1 is a 15-W (per channel) efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers. Advanced EMI suppression technology enables the use of inexpensive ferrite bead filters at the outputs while meeting EMC requirements. SpeakerGuard protection circuitry includes an adjustable power limiter and a DC detection circuit. The adjustable power limiter allows the user to set a virtual voltage rail lower than the chip supply to limit the amount of current through the speaker. The DC detect circuit measures the frequency and amplitude of the PWM signal and shuts off the output stage if the input capacitors are damaged or shorts exist on the inputs. The TPA3110D2...
TPA3111D1
manufacturer
Texas Instruments
10-W Filter-Free Mono Class-D Audio Power Amplifier
The TPA3111D1 device is a 10-W, efficient, Class-D audio power amplifier for driving a bridge tied speaker. Advanced EMI suppression technology enables the use of inexpensive ferrite bead filters at the outputs while meeting EMC requirements. SpeakerGuard speaker protection system includes an adjustable power limiter and a DC detection circuit. The adjustable power limiter lets the user to set a virtual voltage rail lower than the chip supply to limit the current through the speaker. The DC Detect circuit measures the frequency and amplitude of the PWM signal and shuts off the output stage if the input capacitors are damaged or shorts exist on the inputs. The TPA3111D1 can drive a mono speak...
TPA3111D1-Q1
manufacturer
Texas Instruments
10-W Filter-Free Mono Class-D Audio Power Amplifier
The TPA3111D1-Q1 device is a 10-W efficient, Class-D audio power amplifier for driving a bridge tied speaker. Advanced EMI suppression technology enables the use of inexpensive ferrite bead filters at the outputs while meeting EMC requirements. SpeakerGuard™ protection circuitry includes an adjustable power limiter and a DC detection circuit. The adjustable power limiter allows the user to set a virtual voltage rail lower than the chip supply to limit the amount of current through the speaker. The DCdetect circuit measures the frequency and amplitude of the PWM signal and shuts off the output stage if the input capacitors are damaged or shorts exist on the inputs. The TPA3111D1-Q1 device can...




logo    Since 2024. D4U Semiconductor.   |   Contact Us   |   Privacy Policy