logo

SN54LVTH162241 Texas Instruments 3.3-V ABT 16-BIT BUFFERS/DRIVERS Datasheet


Texas Instruments
SN54LVTH162241
Part Number SN54LVTH162241
Manufacturer Texas Instruments (https://www.ti.com/)
Description ORDERING INFORMATION These 16-bit buffers/drivers are designed specifically for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment. The devices can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. The devices provi...
Features
• Members of the Texas Instruments Widebus™ Family
• State-of-the-Art Advanced BiCMOS Technology (ABT) Design for 3.3-V Operation and Low Static-Power Dissipation
• Output Ports Have Equivalent 22-Ω Series Resistors, So No External Resistors Are Required
• Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC)
• Support Unregulated Battery Operation Down to 2.7 V
• Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C
• Ioff and Power-Up 3-State Support Hot Insertion
• Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors ...

Document Datasheet SN54LVTH162241 datasheet pdf (316.69KB)




SN54LVTH162241 Distributor






SN54LVTH162241 Similar Datasheet

Part Number Description
SN54LVTH162240
manufacturer
Texas Instruments
3.3-V ABT 16-BIT BUFFERS/DRIVERS
ORDERING INFORMATION The 'LVTH162240 devices are 16-bit buffers/drivers designed specifically for low-voltage (3.3-V) VCC operation and to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. They have the capability to provide a TTL interface to a 5-V system environment. These devices can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer and provide inverting outputs and symmetrical active-low output-enable (OE) inputs. The outputs, which are designed to source or sink up to 12 mA, include equivalent 22-Ω series resistors to reduce overshoot and undershoot. When VCC is between 0 and 1.5 V...
SN54LVTH162244
manufacturer
Texas Instruments
3.3-V ABT 16-BIT BUFFERS/DRIVERS
ORDERING INFORMATION ORDERING INFORMATION TA –40°C to 85°C PACKAGE (1) FBGA – GRD FBGA – ZRD (Pb-free) Reel of 1000 Tube of 25 SSOP – DL Reel of 1000 TSSOP – DGG Reel of 2000 –55°C to 125°C VFBGA – GQL VFBGA – ZQL (Pb-free) CFP – WD Reel of 1000 Tube ORDERABLE PART NUMBER 74LVTH162244GRDR 74LVTH162244ZRDR SN74LVTH162244DL SN74LVTH162244DLG4 SN74LVTH162244DLR 74LVTH162244DLRG4 SN74LVTH162244DGGR 74LVTH162244DGGRG4 74LVTH162244GRE4 SN74LVTH162244KR 74LVTH162244ZQLR SNJ54LVTH162244WD TOP-SIDE MARKING LL2244 LVTH162244 LVTH162244 LL2244 SNJ54LVTH162244WD (1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www....
SN54LVTH162245
manufacturer
Texas Instruments
3.3-V ABT 16-BIT BUS TRANSCEIVERS
ORDERING INFORMATION The 'LVTH162245 devices are 16-bit (dual-octal) noninverting 3-state transceivers designed for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment. These devices can be used as two 8-bit transceivers or one 16-bit transceiver. The devices allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated. The logic levels of the direction-control (DIR) input and the output-enable (OE) input activate either the B-port output...




logo    Since 2024. D4U Semiconductor.   |   Contact Us   |   Privacy Policy