SN74LVTH373 |
Part Number | SN74LVTH373 |
Manufacturer | Texas Instruments (https://www.ti.com/) |
Description | ordering information These octal latches are designed specifically for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment. While the latc... |
Features |
operation, but with the capability to provide a TTL interface to a 5-V system environment.
While the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the logic levels set up at the D inputs.
4Q
GND
LE
2D
3 2 1 20 19
4
18
8D
2Q 5
17 7D
3Q 6
16 7Q
3D 7
15 6Q
4D 8
14 6D
9 10 11 12 13
5Q
5D
A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither loa... |
Document |
SN74LVTH373 Data Sheet
PDF 1.41MB |
Similar Datasheet
No. | Parte # | Fabricante | Descripción | Hoja de Datos |
---|---|---|---|---|
1 | SN74LVTH373-EP |
ETCTI |
3.3-V ABT OCTAL TRANSPARENT D-TYPE LATCH | |
2 | SN74LVTH374 |
Texas Instruments |
3.3-V ABT OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP | |
3 | SN74LVTH374-EP |
Texas Instruments |
3.3-V ABT OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP | |
4 | SN74LVTH322374 |
ETCTI |
3.3-V ABT 32-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP (Rev. C) | |
5 | SN74LVTH32244 |
ETCTI |
3.3-V ABT 32-BIT BUFFER/DRIVER (Rev. C) | |
6 | SN74LVTH32244-EP |
ETCTI |
3.3-V ABT 32-BIT BUFFER/DRIVER (Rev. A) |