logo

SMAJ8.0 LITE-ON SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS Datasheet

SMAJ8.0 400W, 9.9V, 10%, UNIDIRECTIONAL,


LITE-ON
SMAJ8.0
Part Number SMAJ8.0
Manufacturer LITE-ON
Description LITE-ON SEMICONDUCTOR SMAJ SERIES SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS STAND-OFF VOLTAGE - 5.0 to 170 Volts POWER DISSIPATION - 400 WATTS FEATURES Rating to 200V VBR For surface mounted applications Reliable low cost construction utilizing molded plastic t...
Features Rating to 200V VBR For surface mounted applications Reliable low cost construction utilizing molded plastic technique Plastic material has UL flammability classification 94V-O Typical IR less than 1uA above 10V Fast response time: typically less than 1.0ns for Uni-direction,less than 5.0ns for Bi-direction,form 0 Volts to BV min MECHANICAL DATA Case : Molded plastic Polarity : by cathode band denotes uni-directional device none cathode band denotes bi-directional device Weight : 0.002 ounces, 0.064 gram SMA SMA A DIM. MIN. MAX. A 4.06 4.57 B 2.29 2.92 BC C 1.27 1.63 D 0.15 0.31 E 4.83 5....

Document Datasheet SMAJ8.0 datasheet pdf (49.35KB)
Distributor Distributor
DigiKey
Stock 0 In Stock
Price
52500 units: 80.68326 KRW
37500 units: 97.44088 KRW
15000 units: 99.30227 KRW
7500 units: 114.81947 KRW
BuyNow BuyNow BuyNow (Manufacturer a Taiwan Semiconductor)




SMAJ8.0 Distributor

part
Diodes Incorporated
SMAJ8.0A-13-F
TVS DIODE, 400W, 8V, UNIDIR, SMA
5000 units: 103 KRW
1000 units: 112 KRW
500 units: 135 KRW
100 units: 158 KRW
Distributor
element14 Asia-Pacific

4690 In Stock
BuyNow BuyNow
part
Taiwan Semiconductor
SMAJ8.0
400W, 9.9V, 10%, UNIDIRECTIONAL,
52500 units: 80.68326 KRW
37500 units: 97.44088 KRW
15000 units: 99.30227 KRW
7500 units: 114.81947 KRW
Distributor
DigiKey

0 In Stock
BuyNow BuyNow
part
Diodes Incorporated
SMAJ8.0A-13-F
Diode TVS Single Uni-Dir 8V 400W 2-Pin SMA T/R (Alt: SMAJ8.0A-13-F)
No price available
Distributor
Avnet Asia

0 In Stock
No Longer Stocked
part
Taiwan Semiconductor
SMAJ8.0
ESD Suppressors / TVS Diodes 400W, 9.9V, 10%, Unidirectional, TVS
1 units: 0.46 USD
10 units: 0.323 USD
100 units: 0.163 USD
1000 units: 0.098 USD
2500 units: 0.083 USD
7500 units: 0.068 USD
22500 units: 0.067 USD
45000 units: 0.055 USD
Distributor
Mouser Electronics

0 In Stock
No Longer Stocked
part
Littelfuse Inc
SMAJ8.0CA
TVS Diode Single Bi-Dir 8V 400W 2-Pin SMA T/R
6000 units: 0.0539 USD
3000 units: 0.0553 USD
1000 units: 0.0566 USD
500 units: 0.087 USD
250 units: 0.0966 USD
100 units: 0.0975 USD
25 units: 0.1693 USD
10 units: 0.1767 USD
1 units: 0.239 USD
Distributor
Arrow Electronics

10629 In Stock
BuyNow BuyNow
part
Microchip Technology Inc
SMAJ8.0E3/TR13
Uni-Directional TVS _ SMAJ (DO-214AC), Projected EOL: 2049-02-05
1000 units: 0.15 USD
100 units: 0.16 USD
1 units: 0.18 USD
Distributor
Microchip Technology Inc

0 In Stock
BuyNow BuyNow
part
Bourns Inc
SMAJ8.0A
A 8.0V, 400W, uni-directional, SMA pkg TVS Diode | Bourns SMAJ8.0A
10000 units: 0.118 USD
100000 units: 0.112 USD
500000 units: 0.106 USD
Distributor
RS

0 In Stock
No Longer Stocked
part
Rectron Semiconductor
SMAJ8.0CA
255000 units: 0.0378 USD
150000 units: 0.0383 USD
105000 units: 0.0498 USD
52500 units: 0.0513 USD
30000 units: 0.0521 USD
15000 units: 0.0545 USD
7500 units: 0.0561 USD
Distributor
Onlinecomponents.com

0 In Stock
BuyNow BuyNow
part
EIC Corporation
SMAJ8.0
TVS Diode Single Uni-Dir 8V 400W 2-Pin SMA
5000 units: 0.0806 USD
Distributor
Verical

20000 In Stock
BuyNow BuyNow
part
Taiwan Semiconductor
SMAJ8.0
7500 units: 0.0554 USD
Distributor
Future Electronics

0 In Stock
BuyNow BuyNow





SMAJ8.0 Similar Datasheet

Part Number Description
SMAJ8.0
manufacturer
MIC
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS SMAJ5.0 - SMAJ440CA FEATURES ▪ Working peak reverse voltage range – 5.0V to 440V. ▪ Peak power dissipation 400W @10 x 1000 us Pulse ▪ Low profile package. ▪ Excellent clamping capability. ▪ Glass passivated junction. ▪ Fast response time: typically less than 1 ns for Uni-direction. Less than 5 ns for Bi-direction, from 0 Volts to BV min ▪ Typical IR less than 1uA above 10V. ▪ Plastic material has UL flammability classification 94V-O ▪ RoHS compliant in lead-free versions MECHANICAL CHARACTERISTICS ▪ CASE: Void-free, JEDEC DO-214AC Molded Plastic over glass passivated junction. ▪ Mounting Position: Any ▪ Polarity: by cathode band denotes uni-direct...
SMAJ8.0
manufacturer
Microsemi
Transient Voltage Suppressor
This SMAJ5.0-170A series of surface mount 500 W Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components from destruction or degradation. The package outline is similar to the DO-214AC or DO-214BA. It is also available in a unidirectional configuration or as bidirectional with a C or CA suffix part number as well as RoHS Compliant with an “e3”suffix. Their response time is virtually instantaneous. As a result, they can be used for protection from ESD or EFT per IEC61000-4-2 and IEC61000-4-4, or for inductive switching environments and induced RF protection. They can also protect from secondary lightning effects per IEC61000-4-5 and class levels defined herein. ...
SMAJ8.0
manufacturer
EIC
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
SMAJ 5.0 ~ 170A VBR : 6.8 - 200 Volts PPK : 400 Watts SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMA (DO-214AC) FEATURES : * 400W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1µA above 10V MECHANICAL DATA * Case : SMA Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Lead Formed for Surface Mount * Polarity : Color band denotes cathode end except Bipolar. * Mounting position : Any * Weight : 0.064 grams MAXIMUM RATINGS Rating at Ta = 25 °C ambient temperature unless otherwise specified. Rating Symbol Peak Pulse Power Dissipation (Note1,2,5) Fig....
SMAJ8.0
manufacturer
GME
TRANSIENT VOLTAGE SUPPRESSOR
Production specification TRANSIENT VOLTAGE SUPPRESSOR SMAJ5.0--SMAJ188CA FEATURES z Plastic package has underwriters laboratory flammability classification 94V-0 z Optimized for LAN protection applications z Low profile package with built-in strain relief for surface mounted applications z Low incremental surge resistance, excellent clamping capability z 400W peak pulse power capability with a 10/1000¦Ìs wave form, repetition rate (duty cycle): 0.01% (300W above 78V) z Very fast response time z High temperature soldering guaranteed: 260℃/ 10 seconds at terminals MECHANICAL DATA z Case: JEDEC DO-214AC molded plastic over passivated chip z Terminals: solder plated, solderable per ...
SMAJ8.0
manufacturer
CYStech Electronics
Surface Mount Transient Voltage Suppressors
CYStech Electronics Corp. Spec. No. : C290SA Issued Date : 2010.01.19 Revised Date : 2016.01.11 Page No. : 1/9 Surface Mount Transient Voltage Suppressors Peak Pulse Power 400W Stand Off Voltage 5.0 to 440V SMAJ5.0 thru SMAJ440CA Features  Low profile package with built-in strain relief for surface mounted applications  Plastic package has UL flammability classification 94V-0  Ideal for ESD protection of data line in accordance with IEC1000-4-2 (IEC801-2)  Ideal for EFT protection of data line in accordance with IEC1000-4-4 (IEC801-4)  Very-fast response time  Optimized for LAN protection applications  Low incremental surge resistance, excellent clamping capability  Glass passivat...
SMAJ8.0
manufacturer
Taiwan Semiconductor
Surface Mount Transient Voltage Suppressor
SMAJ5.0(A) – SMAJ188(A) Taiwan Semiconductor 400W, 5V - 188V Surface Mount Transient Voltage Suppressor FEATURES ● Ideal for automated placement ● Glass passivated chip junction ● Excellent clamping capability ● Fast response time: Typically less than 1.0ps from 0 V to BV min ● Typical IR less than 1μA above 10V ● 400W peak pulse power capability with a 10/1000μs waveform (300W above 78V) ● Meets ISO 7637-2 (Pulse 1/2a/2b/3a/3b) ● Moisture sensitivity level: level 1, per J-STD-020 ● RoHS Compliant ● Halogen-free according to IEC 61249-2-21 KEY PARAMETERS PARAMETER VALUE UNIT VWM 5 - 188 V VBR 6.4 - 255 V PPPM tp = 10/1000μs waveform 400 W TJ MAX 150 °C Package DO-214AC (SM...
SMAJ8.0
manufacturer
Rectron
TRANSIENT VOLTAGE SUPPRESSOR
SURFACE MOUNT GPP GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATT STEADY STATE TVS SMA J SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 400 watt surage capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time * P/N suffix V means AEC-Q101 qualified * P/N suffix V means Halogen-free MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 oC ambient temperature unless otherwise specified. DO-214AC 0.067 (1.70 ) 0.051 (1.29 ) 0.180 (4.57 ) 0.160 (4.06 ) 0.110 (2.79 ) 0.086 (2.18 ) 0.091 (2.31 ) 0.067 (1.70 ) 0.059 (1.50 ) 0.035 (0.89 ) 0.012 (0.305 ) 0.006 (0.152 ) 0.008 (0.203 )...
SMAJ8.0
manufacturer
ProTek Devices
400-WATT TVS
05405 Only One Name Means ProTek’Tion™ 400 Watt TVS Component applications • Power Supply • AC/DC Applications • Telecom SMAJ SERIES DO-214ac package Features • UL Registered • IEC 61000-4-2 (ESD): Level 4 - Air 15kV, Contact 8kV • IEC 61000-4-4 (EFT): 40A 5/50ns • IEC 61000-4-5 (Surge): 8/20µs Waveform • Glass Passivated Chip • 400 Watts Peak Pulse Power per Line (tp = 10/1000µs) • Low Leakage Current • Bidirectional and Unidirectional Configurations • Excellent Clamping Capability • Very Fast Response Time • Available in Multiple Voltages • RoHS Compliant • REACH Compliant Mechanical characteristics • Molded JEDEC DO-214AC Package • Approximate Weight: 0.06 grams • Lead-Free Pure-Tin P...
SMAJ8.0
manufacturer
LGE
400Watts Surface Mount Transient Voltage Suppressor
SMAJ SERIES 400Watts Surface Mount Transient Voltage Suppressor Features SMA/DO-214AC For surface mounted application Low profile package Built-in strain relief Glass passivated junction Excellent clamping capability Fast response time: Typically less than 1.0ps from 0 volt to BV min. Typical IR less than 1µA above 10V High temperature soldering guaranteed: 260oC / 10 seconds at terminals Plastic material used carries Underwriters Laboratory Flammability Classification 94V-0 400 watts peak pulse power capability with a 10 x 1000 us waveform by 0.01% duty cycle (300W above 78V). 0.063(1.60) 0.051(1.30) 0.096(2.45) 0.078(2.00) 0.059(1.50) 0.035(0.90) 0.181(4.60) 0.161(4.10) 0.108(2.75) 0...




logo    Since 2024. D4U Semiconductor.   |   Contact Us   |   Privacy Policy