logo

PA4867 UTC DUAL 2.1W AUDIO AMPLIFIER PLUS STEREO HEADPHONE FUNCTION Datasheet


UTC
PA4867
Part Number PA4867
Manufacturer UTC
Description The UTC PA4867 is a stereo audio power amplifier capable of delivering typically 2.1W to a 4Ω load or 2.4W to a 3Ω load each channel with less than 1.0% THD+N using a 5V power supply. UTC PA4867 has a new circuit topolopy which can eliminate headphone output coupling capacitors. And an internal inpu...
Features * Operating voltage range VDD=2V~5.5V * Output power: -2.4W(typ.)@5V into 3Ω with 1% THD+N max (1kHz) -2.1W(typ.)@5V into 4Ω with 1% THD+N max (1kHz) * Eliminates SE-mode output coupling capacitors * Shutdown mode available * click and pop reduction circuitry * Unity-gain stable * Thermal-shutdown Protection * Input MUX control * SE/BTL mode available „ ORDERING INFORMATION Ordering Number Lead Free Halogen Free PA4867L-N20-R PA4867G-N20-R PA4867L-N20-T PA4867G-N20-T PA4867L-P20-R PA4867G-P20-R PA4867L-P20-T PA4867G-P20-T Package HTSSOP-20 HTSSOP-20 TSSOP-20 TSSOP-20 Packing Tape...

Document Datasheet PA4867 datasheet pdf (279.01KB)




PA4867 Distributor






PA4867 Similar Datasheet

Part Number Description
PA48
manufacturer
Tyco
Cascadable Amplifier
The PA48 power amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This two stage GaAs FET feedback amplifier design displays impressive performance characteristics over a broadband frequency range. Both TO-8 and Surface Mount packages are hermetically sealed, and MIL-STD-883 environmental screening is available. Ordering Information Part Number PA48 SMPA48 CPA48 Package TO-8B Surface Mount SMA Connectorized Electrical Specifications: Z0 = 50Ω, VCC = +15 VDC Absolute Maximum Ratings Parameter Frequency Small Signal Gain (min) Gain Flatness (max) Reverse Isolation Noise Figure (max) Power Output @ 1 dB comp. ...
PA4819
manufacturer
UTC
350mW AUDIO POWER AMPLIFIER
As a mono bridged power amplifier which is operating on a single 5V supply, the UTC PA4819 is capable of delivering 350mWRMS of output power per channel into 16Ω loads with less than 10% THD+N and also delivering 300mWRMS of output power per channel into 8Ω loads with less than 10% THD+N. The UTC PA4819 is optimally suited for low-power portable applications because of the it do not require output coupling capacitors, bootstrap capacitors or snubber networks. By using external gain-setting resistors, the closed loop response of the unity-gain stable PA4819 can be configured. „ FEATURES * Output power at 10% THD+N Supply voltage:5V Delivering 350mWRMS into a 16Ω load Delivering 300mWRMS into ...
PA4863
manufacturer
UTC
DUAL 2.2W AUDIO AMPLIFIER
The UTC PA4863 is a dual bridge-connected audio power amplifier. It combines dual bridge speaker amplifiers and stereo headphone amplifiers on one chip to simplify audio system design. In addition, the headphone input pin allows the amplifiers to operate in single-ended mode when driving stereo headphones. The IC could deliver different power by packages as below (when connected to a 5V supply with less than 1.0% THD+N.): - HTSSOP-20, 4Ω load: 2.2W - HTSSOP-20, 3Ω load: 2.5W(with forced-air cooled) - SOP/DIP , 8Ω load: 1.1W. The UTC PA4863 features an externally controlled, low-power consumption shutdown mode, a stereo headphone amplifier mode, and thermal shutdown protection. It also utiliz...
PA4871
manufacturer
UTC
1.1W AUDIO POWER AMPLIFIER
As a mono bridged power amplifier which is operating on a single 5V supply, the UTC PA4871 is capable of delivering 1.1W of output power per channel into 8Ω loads with less than 0.5% THD+N. The UTC PA4871 is optimally suited for low-power portable applications because of the it do not require output coupling capacitors, bootstrap capacitors or snubber networks. By using external gain-setting resistors, the closed loop response of the unity-gain stable PA4871 can be configured.  FEATURES * Output power at 0.5% THD+N Supply voltage:5V Delivering 1.1W into a 8Ω load * With shutdown mode * Stable unity-gain.  ORDERING INFORMATION Ordering Number Lead Free Halogen Free PA4871L-S08-R PA48...
PA4894
manufacturer
UTC
1.8 WATT DIFFERENTIAL AUDIO POWER AMPLIFIER
The UTC PA4894 is a differential audio power amplifier, characterized by its selectable shutdown mode for flexible operation. Shutdown may be enabled by either logic high or low depending on the voltage applied on the SD MODE pin and the shutdown mode features low power consumption. This device provides customers perfect sound performance by its high quality audio, moreover, less external components and lower power dissipation are required. Operating with a 5.5V power supply, the UTC PA4894 is capable of driving an 8.0Ω load at a continuous average output of 1.8W under a 10% THD+N. If it works with a 5.0V voltage under the same load conditions, 1.0W power will be delivered and the distortio...




logo    Since 2024. D4U Semiconductor.   |   Contact Us   |   Privacy Policy