logo

P6KE10CA-G Comchip 600W Transient Voltage Suppressor Datasheet

P6KE10CA-G ESD Suppressors / TVS Diodes 600W, 10V,Bidir


Comchip
P6KE10CA-G
Part Number P6KE10CA-G
Manufacturer Comchip
Description 600W Transient Voltage Suppressor SMD Diodes Specialist P6KE-G Series Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts RoHS Device Features -Plastic package has underwriters laboratory flammability classification 94V-0 -600W, surge capability at 1mS. -Excellent clamping capability. -Low Z...
Features -Plastic package has underwriters laboratory flammability classification 94V-0 -600W, surge capability at 1mS. -Excellent clamping capability. -Low Zener impedance. -Fast response time: typically less than 1.0pS from 0 volt to BV min. -Typical IR less than 1μA above 10V. 1.000(25.40) MIN. DO-15 0.033(0.84) 0.027(0.71) 0.300(7.63) 0.230(5.85) Mechanical Data -Epoxy: UL 94V-0 rate flame retardant -Case: Molded plastic DO-15 -Terminals: Axial leads solderable per MIL-STD-202 , Method 208 -Polarity: Color band denotes positive end (cathode) -Weight: 0.4 gram (0.014oz.) 1.000(25.40) MIN. 0.142(...

Document Datasheet P6KE10CA-G datasheet pdf (217.84KB)
Distributor Distributor
Mouser Electronics
Stock 0 In Stock
Price
1 units: 0.44 USD
10 units: 0.378 USD
100 units: 0.263 USD
500 units: 0.205 USD
1000 units: 0.167 USD
3000 units: 0.141 USD
9000 units: 0.131 USD
24000 units: 0.128 USD
45000 units: 0.125 USD
BuyNow (No Longer Stocked Comchip Technology Corporation Ltd)




P6KE10CA-G Distributor

part
Comchip Technology Corporation Ltd
P6KE10CA-G
14.5V 클램프 41.38A Ipp TVS - 다이오드 스루홀 DO-15
75000 units: 180.31 KRW
30000 units: 185.0269 KRW
9000 units: 189.39767 KRW
6000 units: 203.96667 KRW
3000 units: 214.891 KRW
Distributor
DigiKey

0 In Stock
BuyNow BuyNow
part
Comchip Technology Corporation Ltd
P6KE10CA-G
ESD Suppressors / TVS Diodes 600W, 10V,Bidir
1 units: 0.44 USD
10 units: 0.378 USD
100 units: 0.263 USD
500 units: 0.205 USD
1000 units: 0.167 USD
3000 units: 0.141 USD
9000 units: 0.131 USD
24000 units: 0.128 USD
45000 units: 0.125 USD
Distributor
Mouser Electronics

0 In Stock
No Longer Stocked
part
Comchip Technology Corporation Ltd
P6KE10CA-G
Trans Voltage Suppressor Diode,8.6VV(RWM),Bidirectional
27000 units: 0.141 USD
15000 units: 0.16 USD
1 units: 0.35 USD
Distributor
NAC

0 In Stock
BuyNow BuyNow





P6KE10CA-G Similar Datasheet

Part Number Description
P6KE10CA
manufacturer
Bruckewell
Transient Voltage Suppressors
P6KE6.8C-600CA VBR : 6.8 - 600 Volts PPK : 600 Watts Features • Glass passivated jungtion chip • 600W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) • Typical IR less then 1μA above 10V • RoHS compliant package Applications • For Bi-directional use C or CA Suffix • Electrical characteristics apply in both directions Mechanical Data • Case : DO-15 Molded plastic • Epoxy : UL94V-0 rate flame retardant • Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed • Polarity : Color band denotes cathode end • Mounting position : Any • Weight : 0.4 gram Packing & Order Information 3,0...
P6KE10CA
manufacturer
Ruilon
Transient Voltage Suppressors Diodes
Transient Voltage Suppressors Diodes Axial Leaded - 600W > P6KE6.8~600CA Series The P6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features • Halogen-free • Rohs compliant • Typical maximum temperature coefficient ΔVBR = 0.1% x VBR@25°C x ΔT • Glass passivated Chip junction in DO-15 package • 600W peak pulse capadility at 10×1000μs waveform, repetition rate(duty cycles):0.01% • Fast response time:typically less than 1.0ps from 0 Volts to BV min • Excellent clamping capability • Low incremental surge resistance • Typical IR less than 5μA above 11V • High temperature sol...
P6KE10CA
manufacturer
Diodes
600W TRANSIENT VOLTAGE SUPPRESSOR
Features  600W Peak Pulse Power Dissipation  Voltage Range: 6.8V to 400V  Constructed with Glass Passivated Die  Uni- and Bidirectional Versions Available  Excellent Clamping Capability  Fast Response Time  Lead-Free Finish; RoHS Compliant (Notes 1 & 2) P6KE6V8(C)A - P6KE400(C)A 600W TRANSIENT VOLTAGE SUPPRESSOR Mechanical Data  Case: DO-15  Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0  Moisture Sensitivity: Level 1 per J-STD-020  Leads: Plated Leads, Solderable per MIL-STD-202, Method 208  Marking: Unidirectional - Type Number and Cathode Band  Marking: Bidirectional - Type Number Only  Weight: 0.4 grams (Approximate) Ordering Information (Note ...
P6KE10CA
manufacturer
UTC
TRANSIENT VOLTAGE SUPPRESSORS
The UTC P6KE is Transient Voltage Suppressors. it uses UTC’s advanced technology to provide customers with low leakage current, ultra-low response time and perfect clamping capability, etc  FEATURES * Low leakage current * Ultra-low response time * Perfect clamping capability DO-15  ORDERING INFORMATION Ordering Number Lead Free Halogen Free P6KEXXXXXL-Z15-B P6KEXXXXXG-Z15-B Note: Pin Assignment: A: Anode K: Cathode P6KEXXXXXL-Z15-B (1)Packing Type (2)Package Type (3)Halogen Free (4)Category (5)Output Voltage Package DO-15 Pin Assignment 12 KA Packing Tape Box (1) B: Tape Box (2) Z15: DO-15 (3) L: Lead Free, G: Halogen Free (4) Blank: 10% uni-directional, A: 5% uni-directiona...
P6KE10CA
manufacturer
TAITRON
600W Transient Voltage Suppressor
PPPM PD IFSM VF RθJ...
P6KE10CA
manufacturer
Multicomp
Transient Voltage Suppressor
P6KE Series DO-15 Features: • Plastic package • Exceeds environmental standards of MIL-STD-19500 • 600 W surge capability at 10 × 1,000 µs waveform, duty cycle: 0.01% • Excellent clamping capability • Low zener impedance • Fast response time: typically less than 1.0 ps from 0 V to VBR for unidirectional and 5 ns for bidirectional • Typical IR less than 1 µA above 10 V • High temperature soldering guaranteed: 260°C / 10 seconds / 0.375 Inched (9.5 mm) lead length/5lbs. (2.3 kg) tension Dimensions : Inches (Millimetres) Mechanical Data Case : Molded plastic Lead : Pure tin plated lead free, solderable per MIL-STD-202, Method 208 Polarity : Color band denotes cathode except bipolar Weight :...
P6KE10CA
manufacturer
Fairchild Semiconductor
600W Transient Voltage Suppressors
P6KE6V8(C)A - P6KE440(C)A — 600 W Transient Voltage Suppressors June 2013 P6KE6V8(C)A - P6KE440(C)A 600 W Transient Voltage Suppressors Features • Glass-Passivated Junction • 600 W Peak Pulse Power Capability at 1.0 ms • Excellent Clamping Capability • Low Incremental Surge Resistance • Fast Response Time; Typically < 1.0 ps from 0 V to BV for Uni-directional and 5.0 ns for Bi-directional • Typical IR < 1.0 mA Above 10 V Applications • Devices for Bipolar Applications • Bi-directional Types Use CA Suffix • Electrical Characteristics Apply in Both Directions DO-15 COLOR BAND DENOTES CATHODE ON UNIDIRECTIONAL DEVICES ONLY. NO Absolute Maximum Ratings Stresses exceeding the absolute maxim...
P6KE10CA
manufacturer
STMicroelectronics
600W TVS
The P6KE TVS series is designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 600 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. DS0681 - Rev 8 - November 2022 For further information contact your local STMicroelectronics sales office. www.st.com P6KExxA, P6KExxCA Characteristics 1 Characteristics Table 1. Absolute maximum ratings (Tamb = 25 °C) Symbol Parameter Value Uni...
P6KE10CA
manufacturer
Littelfuse
TVS Diodes
The P6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features • 600W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% • Glass passivated chip junction in DO-15 Package • Fast response time: typically less than 1.0ps from 0 Volts to BV min • Excellent clamping capability • Typical failure mode is short from over-specified voltage or current • Whisker test conducted based on Table 4a and 4c of JEDEC JESD201A • IEC 61000-4-2 ESD 30kV(Air), 30kV (Contact) • EFT protection of data lines in accordance with IEC 61000-4-4 • Low incremental surge resista...
P6KE10CA
manufacturer
ON Semiconductor
600 Watt Peak Power Surmetic 40 Zener Transient Voltage Suppressors
600 Watt Peak Power Surmetic 40 Zener Transient Voltage Suppressors P6KE6.8CA Series Bidirectional* The P6KE6.8CA series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. These devices are ON Semiconductor’s exclusive, cost-effective, highly reliable Surmetic axial leaded package and is ideally-suited for use in communication systems, numerical controls, process controls, medical equipment, business machines, power supplies and many other industrial/consumer applications. Specification Features: • Working Peak Reverse Voltage Range − 5.8 to...




logo    Since 2024. D4U Semiconductor.   |   Contact Us   |   Privacy Policy