logo

ADP2121 Analog Devices Synchronous Step-Down DC-to-DC Converter Datasheet

ADP2121ACBZ-1.8-R7 벅 스위칭 조정기 IC 포지티브 고정 1.8V 1 출력 600mA 6-WFBGA, WLCSP


Analog Devices
ADP2121
Part Number ADP2121
Manufacturer Analog Devices (https://www.analog.com/)
Description The ADP2121 is a high frequency, low quiescent current step-down dc-to-dc converter optimized for portable applications in which board area and battery life are critical constraints. The 6 MHz operating frequency enables the use of tiny ceramic inductors and capacitors. Additionally, the synchronous...
Features Peak efficiency: 92% Operating frequency: 6 MHz Typical quiescent current in auto mode: 36 μA Fixed output voltage: 1.8 V, 1.82 V, 1.85 V, 1.875 V, 2.3 V Maximum guaranteed load current: 600 mA at VIN = 2.7 V to 5.5 V Input voltage: 2.3 V to 5.5 V Typical shutdown supply current: 0.3 μA Automatic power-saving mode Compatible with tiny multilayer inductors Internal synchronous rectifier Internal compensation Internal soft start Output to ground short-circuit protection Cycle-by-cycle current-limit protection Enable/shutdown logic input Undervoltage lockout Thermal shutdown protection Ultrasmall...

Document Datasheet ADP2121 datasheet pdf (2.25MB)
Distributor Distributor
DigiKey
Stock 35619 In Stock
Price
254 units: 1650.5315 KRW
BuyNow BuyNow BuyNow (Manufacturer a Rochester Electronics LLC)




ADP2121 Distributor

part
Rochester Electronics LLC
ADP2121ACBZ-1.8-R7
벅 스위칭 조정기 IC 포지티브 고정 1.8V 1 출력 600mA 6-WFBGA, WLCSP
254 units: 1650.5315 KRW
Distributor
DigiKey

35619 In Stock
BuyNow BuyNow
part
Analog Devices Inc
ADP2121ACBZ-1.8-R7
ADP2121 - 600mA, 6 MHz, Synchronous Step-Down DC-To-DC Converter '
1000 units: 1.02 USD
500 units: 1.08 USD
100 units: 1.12 USD
25 units: 1.17 USD
1 units: 1.19 USD
Distributor
Rochester Electronics

35619 In Stock
BuyNow BuyNow
part
Analog Devices Inc
ADP2121-1.875EVALZ
LINEAR ICS - EVALUATION BOARD
No price available
Distributor
Richardson RFPD

0 In Stock
No Longer Stocked
part
Analog Devices Inc
ADP2121-1.85-EVALZ
No price available
Distributor
Bristol Electronics

1 In Stock
No Longer Stocked





ADP2121 Similar Datasheet

Part Number Description
ADP2102
manufacturer
Analog Devices
Synchronous Step-Down DC-DC Converter
The ADP2102 is a synchronous step-down dc-to-dc converter that converts a 2.7 V to 5.5 V unregulated input voltage to a lower regulated output voltage with up to 95% efficiency and 1% accuracy. The low duty cycle capability of the ADP2102 is ideal for USB applications or 5 V systems that power up submicron subvolt processor cores. Its 3 MHz typical operating frequency and excellent transient response allow the use of small, low cost 1 µH inductors and 2.2 µF ceramic capacitors. At medium-to-high load currents, it uses a current mode, pseudofixed frequency pulsewidth modulation to extend battery life. To ensure the longest battery life in portable applications, the ADP2102 has a power save mo...
ADP2105
manufacturer
Analog Devices
Step-Down DC-to-DC Converter
The ADP2105/ADP2106/ADP2107 are low quiescent current, synchronous, step-down dc-to-dc converters in a compact 4 mm × 4 mm LFCSP package. At medium to high load currents, these devices use a current mode, constant frequency pulse-width modulation (PWM) control scheme for excellent stability and transient response. To ensure the longest battery life in portable applications, the ADP2105/ADP2106/ADP2107 use a pulse frequency modulation (PFM) control scheme under light load conditions that reduces switching frequency to save power. The ADP2105/ADP2106/ADP2107 run from input voltages of 2.7 V to 5.5 V, allowing single Li+/Li− polymer cell, multiple alkaline/NiMH cells, PCMCIA, and other standa...
ADP2106
manufacturer
Analog Devices
Step-Down DC-to-DC Converter
The ADP2105/ADP2106/ADP2107 are low quiescent current, synchronous, step-down dc-to-dc converters in a compact 4 mm × 4 mm LFCSP package. At medium to high load currents, these devices use a current mode, constant frequency pulse-width modulation (PWM) control scheme for excellent stability and transient response. To ensure the longest battery life in portable applications, the ADP2105/ADP2106/ADP2107 use a pulse frequency modulation (PFM) control scheme under light load conditions that reduces switching frequency to save power. The ADP2105/ADP2106/ADP2107 run from input voltages of 2.7 V to 5.5 V, allowing single Li+/Li− polymer cell, multiple alkaline/NiMH cells, PCMCIA, and other standa...
ADP2107
manufacturer
Analog Devices
Step-Down DC-to-DC Converter
The ADP2105/ADP2106/ADP2107 are low quiescent current, synchronous, step-down dc-to-dc converters in a compact 4 mm × 4 mm LFCSP package. At medium to high load currents, these devices use a current mode, constant frequency pulse-width modulation (PWM) control scheme for excellent stability and transient response. To ensure the longest battery life in portable applications, the ADP2105/ADP2106/ADP2107 use a pulse frequency modulation (PFM) control scheme under light load conditions that reduces switching frequency to save power. The ADP2105/ADP2106/ADP2107 run from input voltages of 2.7 V to 5.5 V, allowing single Li+/Li− polymer cell, multiple alkaline/NiMH cells, PCMCIA, and other standa...
ADP2108
manufacturer
Analog Devices
Step-Down DC-to-DC Converter
The ADP2108 is a high efficiency, low quiescent current stepdown dc-to-dc converter manufactured in two different packages. The total solution requires only three tiny external components. It uses a proprietary, high speed current mode, constant frequency PWM control scheme for excellent stability and transient response. To ensure the longest battery life in portable applications, the ADP2108 has a power save mode that reduces the switching frequency under light load conditions. The ADP2108 runs on input voltages of 2.3 V to 5.5 V, which allows for single lithium or lithium polymer cell, multiple alkaline or NiMH cell, PCMCIA, USB, and other standard power sources. The maximum load current o...
ADP2109
manufacturer
Analog Devices
Step-Down Converter
The ADP2109 is a high efficiency, low quiescent current stepdown dc-to-dc converter with an internal discharge switch that allows automatic discharge of the output capacitor in an ultrasmall 5-ball WLCSP package. The total solution requires only three tiny external components. It uses a proprietary high speed current mode and constant frequency pulse-width modulation (PWM) control scheme for excellent stability, and transient response. To ensure the longest battery life in portable applications, the ADP2109 has a power save mode that reduces the switching frequency under light load conditions. The ADP2109 runs on input voltages of 2.3 V to 5.5 V, which allow for single lithium or lithium pol...
ADP2114
manufacturer
Analog Devices
Synchronous Step-Down DC-to-DC Regulator
The ADP2114 is a versatile, synchronous step-down, switching regulator that satisfies a wide range of customer point-of-load requirements. The two PWM channels can be configured to deliver independent outputs at 2 A and 2 A (or 3 A/1 A) or can be configured as a single interleaved output capable of delivering 4 A. The two PWM channels are 180º phase shifted to reduce input ripple current and to reduce input capacitance. The ADP2114 provides high efficiency and operates at switching frequencies of up to 2 MHz. At light loads, the ADP2114 can be set to operate in pulse skip mode for higher efficiency or in forced PWM mode to reduce EMI. The ADP2114 is designed with an optimized gate slew rate ...
ADP2116
manufacturer
Analog Devices
Step-Down DC-to-DC Regulator
The ADP2116 is a versatile, synchronous, step-down switching regulator that satisfies a wide range of customer point-of-load requirements. The two PWM channels can be configured to deliver independent outputs at 3 A and 3 A (or at 3 A and 2 A) or can be configured as a single interleaved output capable of delivering 6 A. The two PWM channels are 180° phase shifted to reduce input ripple current and input capacitance. The ADP2116 provides high efficiency and can operate at switching frequencies of up to 2 MHz. At light loads, the ADP2116 can be set to operate in pulse skip mode for higher efficiency or in forced PWM mode for noise sensitive applications. The ADP2116 is designed with an optimi...
ADP2118
manufacturer
Analog Devices
Step-Down DC-to-DC Converter
The ADP2118 is a low quiescent current, synchronous, step-down dc-to-dc regulator in a compact 4mm × 4mm LFCSP package. It uses a current mode, constant frequency pulse-width modulation (PWM) control scheme for excellent stability and transient response. Under light loads, the ADP2118 can be configured to operate in pulse frequency modulation (PFM) mode that reduces switching frequency to save power. The ADP2118 runs from input voltages of 2.3 V to 5.5 V. The output voltage of the ADP2118ACPZ-R7 is adjustable from 0.6 V to input voltage (VIN), and the ADP2118ACPZ-x.x-R7 are available in preset output voltage options of 1.2 V and 3.3 V. The ADP2118 requires minimal external parts and provides...
ADP2119
manufacturer
Analog Devices
Step-Down DC-to-DC Regulators
The ADP2119/ADP2120 are low quiescent current, synchronous, step-down dc-to-dc regulators in a compact 3 mm × 3 mm LFCSP_WD package. Both devices use a current mode, constant frequency pulse-width modulation (PWM) control scheme for excellent stability and transient response. Under light load conditions, they can be configured to operate in a pulse frequency modulation (PFM) mode, which reduces switching frequency to save power. The ADP2119/ADP2120 support input voltages from 2.3 V to 5.5 V. The output voltage can be adjusted from 0.6 V up to the input voltage (VIN) for the adjustable version, whereas the fixed output version is available in preset output voltage options of 3.3 V, 2.5 V, 1.8...




logo    Since 2024. D4U Semiconductor.   |   Contact Us   |   Privacy Policy