logo

AWT6109 ANADIGICS KPCS CDMA 3.5V/28.5dBm Linear Power Amplifier Datasheet

AWT6109M5P8 IC RF AMP CDMA 1.75GHZ-1.78GHZ


ANADIGICS
AWT6109
Part Number AWT6109
Manufacturer ANADIGICS
Description The AWT6109 is a 3.5 V (3.0 V to 4.2 V) high efficiency, 3 stage amplifier module for Korean Band PCS handsets. The device is manufactured on an advanced InGaP HBT MMIC technology offering state-of-the-art reliability, temperature stability, and ruggedness. Full output power is achieved at a low qui...
Features









• InGaP HBT Technology High Efficiency (35% Typ) Low Leakage Current (5µA) SMT Module Package Small Foot Print (6mm x 6mm) Low Profile (1.5mm) 50 Ω Input and Output Matching POUT = 28.5 dBm @ Icq= 60mA Typ No Mode Switching Required CDMA 2000 1XRTT Compliant APPLICATIONS
• Korean Band PCS CDMA Handsets M5 Package 7 Pin 6mm x 6mm Surface Mount Module PRODUCT DESCRIPTION The AWT6109 is a 3.5 V (3.0 V to 4.2 V) high efficiency, 3 stage amplifier module for Korean Band PCS handsets. The device is manufactured on an advanced InGaP HBT MMIC technology offering state-of-the-art r...

Document Datasheet AWT6109 datasheet pdf (303.66KB)
Distributor Distributor
DigiKey
Stock 107500 In Stock
Price
112 units: 2.69 USD
BuyNow BuyNow BuyNow (Manufacturer a ANADIGICS Inc)




AWT6109 Distributor

ANADIGICS Inc
AWT6109M5P8
IC RF AMP CDMA 1.75GHZ-1.78GHZ
112 units: 2.69 USD
Distributor
DigiKey

107500 In Stock
BuyNow BuyNow
ANADIGICS Inc
AWT6109M5P8
Narrow Band Medium Power Amplifier, 1750MHz Min, 1780MHz Max, 1 Func, BIPolar
1000 units: 2.31 USD
500 units: 2.45 USD
100 units: 2.56 USD
25 units: 2.66 USD
1 units: 2.72 USD
Distributor
Rochester Electronics

107500 In Stock
BuyNow BuyNow





AWT6109 Similar Datasheet

Part Number Description
AWT6102M2
manufacturer
ANADIGICS Inc
EGSM/DCS/PCS Triple Band Power Amplifier Module
The AWT6102 is a 3.5V power amplifier module for use in dual Mode GSM/DCS/PCS wireless handsets and communication systems. Absolute Minimum and Maximum Ratings SIGNAL Supply Voltage (Vcc ) Input Power (RF IN) Control Voltage (V APC ) Storage Temperature (TSTG ) Operating Temperature (TC) -55 -25 MIN MAX +7 +15 + 4.3V 150 85 UNITS V dBm V °C °C AWT6102M2 Electrical Specifications EGSM: (Unless otherwise specified: Vcc = 3.2V, Z = Z =50Ω System, TC = 25 °C, pulsed operation with 577µsec pulse width and 12.5% duty cycle) PARAMETER Frequency Supply Voltage Control Voltage Range Power Control Current Input Power Output Power Power Added Efficiency Degraded Output Power VC C =2.9 V, VAPC = 2.4V, ...
AWT6103M5
manufacturer
ANADIGICS Inc
Cellular Dual Mode AMPS/TDMA Mode 3.5V/30 dBm Linear Power Amplifier Module
The AWT6103 is a 3.5V power amplifier module for use in Dual Mode AMPS/TDMA handsets. Absolute Minimum and Maximum Ratings S IGNAL Supply Voltage (Vcc ) Input Power (RF IN ) Bias Voltage (V REF ) V M O D Voltage (V MOD ) Storage Temperature (T STG ) Operating Temperature (T C ) -55 -25 MIN MAX +5 +10 +3.5 +3.5 100 80 UNITS V dBm V V °C °C AWT6103M5 Electrical Specifications AMPS: (Unless otherwise specified: Vcc = 3.5V, Z = Z IN OUT =50Ω System, TC = 25 °C) Maximum 849 Units MHz V V mA dBm dBm 2:1 2:1 Parameter Frequency Range Supply Voltage Range Ref voltage Range Ref current Output Power, V CC = 3.5V Output Power, V CC = 3.0V Input Impedance Output Impedance Efficiency Pout = 32 dBm Icq...
AWT6104M5
manufacturer
ANADIGICS Inc
PCS TDMA 3.5V/30 dBm Linear Power Amplifier Module
The AWT6104 is a 3.5V power amplifier module for use in PCS TDMA wireless handsets and communication systems. Absolute Minimum and Maximum Ratings S IGNAL Supply Voltage (V CC ) Input Power (RF IN ) Control Voltage (V REF ) V MOD Voltage (V MOD ) Storage Temperature (T STG ) Operating Temperature (T C ) -55 -25 MIN MAX +5 +10 +3.5 +3.5 100 80 UNITS V dBm V V °C °C AWT6104M5 Electrical Specifications (TDMA 1850-1910 MHz) (Unless otherwise specified: Vcc = 3.5V, Z = Z =50Ω System , TC = 25 °C) IN OUT Parameter Frequency Range Supply Voltage Range Ref. Voltage Range Ref. Current Output Power, V CC = 3.5V Output Power, V CC = 3.0V Input VSWR Output VSWR Power Added Efficiency Pout = 30 dBm Pow...
AWT6105
manufacturer
ANADIGICS
Cellular Dual-Mode AMPS/CDMA
The AWT6105 is a high power, high efficiency amplifier module for Dual Mode CDMA/AMPS wireless handset applications. The device is manufactured on an advanced InGaP HBT MMIC technology offering state-of-the-art reliability, temperature stability and ruggedness. A low power quiescent current mode is digitally controlled to reduce power drain on the system battery. The 6mm x 6mm laminate package is self contained, incorporating 50 Ω input and output matching networks optimized for output power, linearity, and efficiency. V REF V CC V MODE Bias Control RFIN RFOUT GND Figure 1: Block Diagram 10/2001 www.DataSheet4U.com AWT6105 Table 1: Pin Description PIN 1 2 3 4 5 6 7 NAME VCC RFIN...
AWT6106
manufacturer
ANADIGICS
PCS/CDMA 3.5V/28.5dBm Linear Power Amplifier
The AWT6106 is a 3.5 V (3.0 V to 4.2 V) high power, high efficiency, three stage power amplifier module for Dual Mode CDMA/PCS wireless handsets. The device is manufactured on an advanced InGaP HBT MMIC technology offering state-of-the-art reliability, temperature stability, and ruggedness. A low power VCC quiescent current mode is digitally controlled to reduce power drain on the system battery. The 6mm x 6mm laminate package is self contained, incorporating 50Ω input and output matching networks optimized for output power, linearity, and efficiency. 1 7 GND RFIN 2 6 RFOUT Bias Control VREF 3 4 VMODE 5 VCC Figure 1: Block Diagram 03/2002 AWT6106 VCC 1 7 GND www.DataSheet4U.c...
AWT6107
manufacturer
ANADIGICS Inc
EGSM/DCS Dual Band 3.5V GPRS Power Amplifier Module
The AWT6107 power amplifier module has been optimized for dual band operation (EGSM and DCS1800 bands). The amplifier is suitable for class 10 GPRS (2 TX Slots) handsets and similar communication systems. The module integrates practically all circuitry associated with the power amplifier function including bias management and matching components for 50W systems. This includes closed loop over control voltage protection making the amplifier extremely rugged. The maximum output power is achieved at a lower control voltage avoiding the need to use rail to rail operational amplifiers in the power control scheme. The module uses a two stage EGSM power amplifier and a three stage DCS1800 power amp...
AWT6108
manufacturer
ANADIGICS
Quad Band Power Amplifier
This quad band power amplifier module is designed to support dual, tri and quad band applications. The module includes an integrated power control scheme that facilitates fast and easy production calibration and reduces the number of external components required to complete a power control function. The amplifier’s power control range is typically 55dB, with the output power set by applying an analog voltage to VRAMP. The logical control inputs, TX_EN and BS, are both 1.8 V and 3 V logic compliant. The TX_EN is used to enable the amplifier typically with the TX burst. The BS is used to select which amplifier is enabled. There are two amplifier chains, one to support GSM850/900 bands, the o...
AWT6108R
manufacturer
ANADIGICS
GSM850/GSM900/DCS/PCS Quad Band Power Amplifier
This quad band power amplifier module is designed to support dual, tri and quad band applications. The module includes an integrated power control scheme that facilitates fast and easy production calibration and reduces the number of external components required to complete a power control function. The amplifier’s power control range is typically 55dB, with the output power set by applying an analog voltage to VRAMP. The logical control inputs, TX_EN and BS, are both 1.8 V and 3 V logic compliant. The TX_EN is used to enable the amplifier typically with the TX burst. The BS is used to select which amplifier is enabled. There are two amplifier chains, one to support GSM850/900 bands, the oth...
AWT6111
manufacturer
ANADIGICS
CDMA/AMPS Power Amplifier
The AWT6111 is a hetero-junction bipolar transistor (HBT) amplifier designed for the CDMA cellular handset. The frequency band of operation is 824-849 MHz. The AWT6111 is designed to operate from a single lithium-ion (Li-ion) battery. The amplifier input and output are matched to provide optimum performance in a 50 Ω system. Minimal external components are required for proper RF bypassing. The tantalum capacitors, C8 and C9, are not required. Landings should be made available on the printed circuit board (PCB) as a precaution. Table 1: AWT6111 Module Pin Description PIN 1 2 3 4 5 6 7 NAME V CC1 RFIN VREF VMODE V CC2 RFOUT GND DESCRIPTION Bias supply to 1st stage collector RF Input Reference...




logo    Since 2024. D4U Semiconductor.   |   Contact Us   |   Privacy Policy