logo

MAX2031 Maxim Integrated Products 650MHz to 1000MHz Upconversion/ Downconversion Mixer Datasheet

MAX20313EWC+T POWER LOAD SWITCH, 5.5V, WLP-12


Maxim Integrated Products
MAX2031
Part Number MAX2031
Manufacturer Maxim Integrated (https://www.analog.com/) Products
Description The MAX2031 high-linearity passive upconverter or downconverter mixer is designed to provide +36dBm IIP3, 7dB NF, and 7dB conversion loss for an 815MHz to 1000MHz RF frequency range to support GSM/cellular base-station transmitter or receiver applications. With a 960MHz to 1180MHz LO frequency range...
Features o 815MHz to 1000MHz RF Frequency Range o 960MHz to 1180MHz LO Frequency Range o 325MHz to 850MHz LO Frequency Range (Contact Factory) o DC to 250MHz IF Frequency Range o 7dB Conversion Loss o +36dBm Input IP3 o +27dBm Input 1dB Compression Point o 7dB Noise Figure o Integrated LO Buffer o Integrated RF and LO Baluns o Low -3dBm to +3dBm LO Drive o Built-In SPDT LO Switch with 49dB LO1 to LO2 Isolation and 50ns Switching Time o Pin Compatible with the MAX2039/MAX2041 1700MHz to 2200MHz Mixers o External Current-Setting Resistor Provides Option for Operating Mixer in Reduced-Power/ReducedPerform...

Document Datasheet MAX2031 datasheet pdf (1.06MB)
Distributor Distributor
element14 Asia-Pacific
Stock 2500 In stock
Price
7500 units: 1921 KRW
2500 units: 1930 KRW
BuyNow BuyNow BuyNow (Manufacturer a Analog Devices Inc)


Similar Datasheet

Part Number Description
MAX200
manufacturer
Maxim
RS-232 Transceivers
MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. The drivers maintain the ±5V EIA/TIA-232E output signal levels at data rates in excess of 120kbps when loaded in accordance with the EIA/TIA-232E specification. The MAX211 and MAX213 are available in a 28-pin, wide small-outline (SO) package and a 28-pin shrink smalloutline (SSOP) package, which occupies only 40% of the area of the SO. The MAX207 is available in a 24-pin SO package and a 24-pin SSOP. The MAX203 and MAX205 use no external components and are recommended for applications with limited circuit board space. Benefits and Features ●● S...
MAX20002
manufacturer
Maxim Integrated
2A/3A Fully Integrated Step-Down Converters
The MAX20002/MAX20003 are small, synchronous buck converters with integrated high-side and low-side MOSFETs. Each device is designed to deliver up to 2A/3A with input voltages from 3.5V to 36V, while using only 15µA quiescent current at no load. Voltage quality can be monitored by observing the PGOOD signal. The devices can operate in dropout by running at 98% duty cycle, making them ideal for automotive applications. The devices offer fixed output voltages of 5V/3.3V, along with the ability to program the output voltage between 1V to 10V. Frequency can be programmed using a resistor to ground on the FOSC pin from 220kHz to 2.2MHz. The devices offer a forced fixed-frequency mode and skip mod...
MAX20003
manufacturer
Maxim Integrated
2A/3A Fully Integrated Step-Down Converters
The MAX20002/MAX20003 are small, synchronous buck converters with integrated high-side and low-side MOSFETs. Each device is designed to deliver up to 2A/3A with input voltages from 3.5V to 36V, while using only 15µA quiescent current at no load. Voltage quality can be monitored by observing the PGOOD signal. The devices can operate in dropout by running at 98% duty cycle, making them ideal for automotive applications. The devices offer fixed output voltages of 5V/3.3V, along with the ability to program the output voltage between 1V to 10V. Frequency can be programmed using a resistor to ground on the FOSC pin from 220kHz to 2.2MHz. The devices offer a forced fixed-frequency mode and skip mod...
MAX20011E
manufacturer
Analog Devices
Automotive Single 8A Step-Down Converters
The MAX20011E/MAX20011F/MAX20011G are high-efficiency, synchronous step-down converters that operate with a 3.0V to 5.5V input voltage range and supply a 0.5V to 1.275V output voltage range. The wide input/output voltage range and ability to provide up to 16A peak output current make these devices ideal for on-board point-ofload and post-regulation applications. The MAX20011E/ MAX20011F/MAX20011G achieve ±1.5% output error over load, line, and temperature ranges. The MAX20011E/MAX20011F/MAX20011G feature a 2.2MHz fixed-frequency PWM mode for better noise immunity and load-transient response. The 2.2MHz frequency operation allows for the use of all ceramic capacitors and minimizes external co...
MAX20011F
manufacturer
Analog Devices
Automotive Single 12A Step-Down Converters
The MAX20011E/MAX20011F/MAX20011G are high-efficiency, synchronous step-down converters that operate with a 3.0V to 5.5V input voltage range and supply a 0.5V to 1.275V output voltage range. The wide input/output voltage range and ability to provide up to 16A peak output current make these devices ideal for on-board point-ofload and post-regulation applications. The MAX20011E/ MAX20011F/MAX20011G achieve ±1.5% output error over load, line, and temperature ranges. The MAX20011E/MAX20011F/MAX20011G feature a 2.2MHz fixed-frequency PWM mode for better noise immunity and load-transient response. The 2.2MHz frequency operation allows for the use of all ceramic capacitors and minimizes external co...
MAX20011G
manufacturer
Analog Devices
Automotive Single 16A Step-Down Converters
The MAX20011E/MAX20011F/MAX20011G are high-efficiency, synchronous step-down converters that operate with a 3.0V to 5.5V input voltage range and supply a 0.5V to 1.275V output voltage range. The wide input/output voltage range and ability to provide up to 16A peak output current make these devices ideal for on-board point-ofload and post-regulation applications. The MAX20011E/ MAX20011F/MAX20011G achieve ±1.5% output error over load, line, and temperature ranges. The MAX20011E/MAX20011F/MAX20011G feature a 2.2MHz fixed-frequency PWM mode for better noise immunity and load-transient response. The 2.2MHz frequency operation allows for the use of all ceramic capacitors and minimizes external co...
MAX20021
manufacturer
Maxim Integrated
Step-Down DC-DC Converters
The MAX20021/MAX20022 power-management ICs (PMICs) integrate four low-voltage, high-efficiency, stepdown DC-DC converters. Each of the four outputs is factory or resistor programmable between 1.0V to 4.0V and can deliver up to 1.0A of current. The PMICs operate from 3.0V to 5.5V, making them ideal for automotive pointof-load and post-regulation applications. The PMICs feature fixed-frequency PWM-mode operation with a switching frequency of 2.2MHz or 3.2MHz. Highfrequency operation allows for an all-ceramic capacitor design and small-size external components. The lowresistance on-chip switches ensure high efficiency at heavy loads while minimizing critical inductances, making the layout a muc...
MAX20022
manufacturer
Maxim Integrated
Step-Down DC-DC Converters
The MAX20021/MAX20022 power-management ICs (PMICs) integrate four low-voltage, high-efficiency, stepdown DC-DC converters. Each of the four outputs is factory or resistor programmable between 1.0V to 4.0V and can deliver up to 1.0A of current. The PMICs operate from 3.0V to 5.5V, making them ideal for automotive pointof-load and post-regulation applications. The PMICs feature fixed-frequency PWM-mode operation with a switching frequency of 2.2MHz or 3.2MHz. Highfrequency operation allows for an all-ceramic capacitor design and small-size external components. The lowresistance on-chip switches ensure high efficiency at heavy loads while minimizing critical inductances, making the layout a muc...
MAX2003
manufacturer
Maxim
NiCd/NiMH Battery Fast-Charge Controllers
The MAX2003/MAX2003A are fast-charge battery chargers (with conditioning) for NiCd (nickel cadmium) or NiMH (nickel-metal hydride) rechargeable batteries. The MAX2003A has the same features as the MAX2003 with an additional pulsed trickle-charge mode to prevent dendrite formation in NiMH batteries. Each can be configured as a switch-mode current regulator or as a gating controller for an external current source. Switch-mode current regulation provides efficient energy transfer, reducing power dissipation and the associated heating. Gating control of an external current source requires minimal components, saving space and cost. On-chip algorithms determine charge termination, so the MAX2003/M...
MAX2003A
manufacturer
Maxim Integrated
NiCd/NiMH Battery Fast-Charge Controllers
The MAX2003/MAX2003A are fast-charge battery chargers (with conditioning) for NiCd (nickel cadmium) or NiMH (nickel-metal hydride) rechargeable batteries. The MAX2003A has the same features as the MAX2003 with an additional pulsed trickle-charge mode to prevent dendrite formation in NiMH batteries. Each can be configured as a switch-mode current regulator or as a gating controller for an external current source. Switch-mode current regulation provides efficient energy transfer, reducing power dissipation and the associated heating. Gating control of an external current source requires minimal components, saving space and cost. On-chip algorithms determine charge termination, so the MAX2003/M...




logo    Since 2024. D4U Semiconductor.   |   Contact Us   |   Privacy Policy