logo

MAX1035 Maxim Integrated Products (MAX1034 / MAX1035) Serial 14-Bit ADCs Datasheet

MAX1035EUP+ Analog to Digital Converters - ADC 8-/4-Channel, +/-VREF Multirange Inputs, S


Maxim Integrated Products
MAX1035
Part Number MAX1035
Manufacturer Maxim Integrated (https://www.analog.com/) Products
Description The MAX1034/MAX1035 multirange, low-power, 14-bit, successive-approximation, analog-to-digital converters (ADCs) operate from a single +5V supply and achieve throughput rates up to 115ksps. A separate digital supply allows digital interfacing with 2.7V to 5.25V systems using the SPI™-/QSPI™-/MICROWI...
Features ♦ Software-Programmable Input Range for Each Channel ♦ Single-Ended Input Ranges 0 to +VREF/2, -VREF/2 to 0, 0 to +VREF, -VREF to 0, ±VREF/4, ±VREF/2, and ±VREF ♦ Differential Input Ranges ±VREF/2, ±VREF, and ±2 x VREF ♦ Eight Single-Ended or Four Differential Analog Inputs (MAX1034) ♦ Four Single-Ended or Two Differential Analog Inputs (MAX1035) ♦ ±6V Overvoltage Tolerant Inputs ♦ Internal or External Reference ♦ 115ksps Maximum Sample Rate ♦ Single +5V Power Supply ♦ 20-/24-Pin TSSOP Package MAX1034/MAX1035 Ordering Information PART MAX1034EUG* MAX1035EUP TEMP RANGE -40°C to +85°C -40°C to...

Document Datasheet MAX1035 datasheet pdf (364.37KB)
Distributor Distributor
Mouser Electronics
Stock 43 In Stock
Price
1 units: 8.92 USD
10 units: 8.37 USD
BuyNow BuyNow BuyNow (Manufacturer a Analog Devices Inc)




MAX1035 Distributor

part
Maxim Integrated Products
MAX1035EUP+
14 비트 아날로그 디지털 변환기 2, 4 입력 1 SAR 20-TSSOP
148 units: 10789.946 KRW
74 units: 11338.081 KRW
10 units: 11828.3 KRW
1 units: 12867 KRW
Distributor
DigiKey

66 In Stock
BuyNow BuyNow
part
Analog Devices Inc
MAX1035EUP+
Analog to Digital Converters - ADC 8-/4-Channel, +/-VREF Multirange Inputs, S
1 units: 8.92 USD
10 units: 8.37 USD
Distributor
Mouser Electronics

43 In Stock
BuyNow BuyNow
part
Analog Devices Inc
MAX1035EUP+
8-/4-Channel, ±VREF Multirange
1 units: 8.92 USD
10 units: 8.2 USD
1000 units: 7.64 USD
Distributor
Analog Devices Inc

1176 In Stock
BuyNow BuyNow





MAX1035 Similar Datasheet

Part Number Description
MAX100
manufacturer
Maxim
250Msps / 8-Bit ADC with Track/Hold
The MAX100 ECL-compatible, 250Msps, 8-bit analog-todigital converter (ADC) allows accurate digitizing of analog signals from DC to 125MHz (Nyquist frequency). Designed with Maxim’s proprietary advanced bipolar processes, the MAX100 contains a high-performance track/hold (T/H) amplifier and a quantizer in a single ceramic strip-line package. The innovative design of the internal T/H assures an exceptionally wide input bandwidth of 1.2GHz and aperture delay uncertainty of less than 2ps, resulting in a high 6.8 effective bits performance. Special comparator output design and decoding circuitry reduce out-of-sequence code errors. The probability of erroneous codes occurring due to metastable sta...
MAX1002
manufacturer
Maxim
Low-Power / 60Msps / Dual / 6-Bit ADC
The MAX1002 is a dual, 6-bit analog-to-digital converter (ADC) that combines high-speed, low-power operation with a user-selectable input range, an internal reference, and a clock oscillator. The dual, parallel ADCs are designed to convert in-phase (I) and quadrature (Q) analog signals into two 6-bit offset-binary-coded digital outputs at sampling rates up to 60Msps while achieving typical integral nonlinearity (INL) and differential nonlinearity (DNL) of ±1/4LSB. The ability to interface directly with baseband I and Q signals makes the MAX1002 ideal for use in direct-broadcast satellite, VSAT, and QAM16 demodulation applications. The MAX1002 input amplifiers feature true differential inputs...
MAX1003
manufacturer
Maxim
Low-Power / 90Msps / Dual 6-Bit ADC
The MAX1003 is a dual, 6-bit analog-to-digital converter (ADC) that combines high-speed, low-power operation with a user-selectable input range, an internal reference, and a clock oscillator. The dual parallel ADCs are designed to convert in-phase (I) and quadrature (Q) analog signals into two 6-bit, offset-binary-coded digital outputs at sampling rates up to 90Msps. The ability to directly interface with baseband I and Q signals makes the MAX1003 ideal for use in direct-broadcast satellite, VSAT, and QAM16 demodulation applications. The MAX1003 input amplifiers feature true differential inputs, a -0.5dB analog bandwidth of 55MHz, and userprogrammable input full-scale ranges of 125mVp-p, 250...
MAX1005
manufacturer
Maxim
IF Undersampler
The MAX1005 is a combined digitizer and reconstruction integrated circuit designed to work in systems that demodulate and modulate communications signals. It integrates IF undersampling and signal synthesis functions into a single, low-power circuit. Its analog-todigital converter (ADC) is used to directly sample or undersample a downconverted RF signal, while its digital-to-analog converter (DAC) recreates the IF subcarrier and transmission data. The MAX1005’s ADC is ideal for undersampling applications, due to the analog input amplifier’s wide (15MHz) bandwidth. The DAC has very low glitch energy, which minimizes the transmission of unwanted spurious signals. An on-chip reference provides ...
MAX1007
manufacturer
Maxim
Mobile-Radio Analog Controller
The MAX1007 is a multifunctional integrated circuit designed for high-performance mobile radios. It includes one 8-bit analog-to-digital converter (ADC), and two 7-bit and two 6-bit digital-to-analog converters (DACs) for functions including radio-frequency (RF) power sensing and antenna-diversity selection. The ADC provides for power sense, receive-signal strength intensity (RSSI) measurements and system supervision. In the power-sense mode, the ADC converts the power-sensing circuitry signal (representing either the transmitted (Tx) or received (Rx) RF power) into a digital code, ensuring optimum Tx power setting and Rx signal analysis. An additional direct input to the ADC provides for sy...
MAX101
manufacturer
Maxim
500Msps / 8-Bit ADC with Track/Hold
The MAX101A ECL-compatible, 500Msps, 8-bit analogto-digital converter (ADC) allows accurate digitizing of analog signals from DC to 250MHz (Nyquist frequency). Dual monolithic converters, driven by the track/hold (T/H), operate on opposite clock edges (time interleaved). Designed with Maxim’s proprietary advanced bipolar processes, the MAX101A contains a high-performance T/H amplifier and two quantizers in an 84-pin ceramic flat pack. The innovative design of the internal T/H ensures an exceptionally wide 1.2GHz input bandwidth and aperture delay uncertainty of less than 2ps, resulting in a high 7.0 effective bits at the Nyquist frequency. Special comparator output design and decoding circui...
MAX1011
manufacturer
Maxim
Low-Power / 90Msps / 6-Bit ADC
Features o High Sampling Rate: 90Msps o Low Power Dissipation: 215mW o Excellent Dynamic Performance: 5.85 ENOB with 20MHz Analog Input 5.7 ENOB with 50MHz Analog Input o ±1/4LSB INL and DNL (typ) o ±1/4LSB Input Offset (typ) o Internal Bandgap Voltage Reference o Internal Oscillator with Overdrive Capability o 55MHz (-0.5dB) Bandwidth Input Amplifier with True Differential Input o User-Selectable Full-Scale Range (125mVp-p, 250mVp-p, or 500mVp-p) o Single-Ended or Differential Input Drive o Flexible, 3.3V, CMOS-Compatible Digital Outputs MAX1011 The MAX1011 is a 6-bit analog-to-digital converter (ADC) that combines high-speed, low-power operation with a user-selectable input range, an int...
MAX101A
manufacturer
Maxim
500Msps / 8-Bit ADC
The MAX101A ECL-compatible, 500Msps, 8-bit analogto-digital converter (ADC) allows accurate digitizing of analog signals from DC to 250MHz (Nyquist frequency). Dual monolithic converters, driven by the track/hold (T/H), operate on opposite clock edges (time interleaved). Designed with Maxim’s proprietary advanced bipolar processes, the MAX101A contains a high-performance T/H amplifier and two quantizers in an 84-pin ceramic flat pack. The innovative design of the internal T/H ensures an exceptionally wide 1.2GHz input bandwidth and aperture delay uncertainty of less than 2ps, resulting in a high 7.0 effective bits at the Nyquist frequency. Special comparator output design and decoding circui...
MAX1020
manufacturer
Maxim Integrated
Multichannel ADCs/DACs
The MAX1020/MAX1022/MAX1057/MAX1058 integrate a multichannel, 10-bit, analog-to-digital converter (ADC) and an octal, 10-bit, digital-to-analog converter (DAC) in a single IC. These devices also include a temperature sensor and configurable general-purpose I/O ports (GPIOs) with a 25MHz SPI-/QSPI™-/MICROWIRE®-compatible serial interface. The ADC is available in 8/12/16 inputchannel versions. The octal DAC outputs settle within 2.0µs, and the ADC has a 225ksps conversion rate. All devices include an internal reference (2.5V or 4.096V) providing a well-regulated, low-noise reference for both the ADC and DAC. Programmable reference modes for the ADC and the DAC allow the use of an internal refe...
MAX1021
manufacturer
Maxim
(MAX1021 / MAX1043) Multichannel ADCs/DACs
The MAX1021/MAX1043 integrate a multichannel, 10-bit, analog-to-digital converter (ADC) and a 10-bit, digital-toanalog converter (DAC) in a single IC. The devices also include a temperature sensor and configurable generalpurpose I/O ports (GPIOs) with a 25MHz SPI™-/QSPI™-/ MICROWIRE™-compatible serial interface. The ADC is available in an eight input-channel version. The DAC outputs settle within 2.0µs, and the ADC has a 225ksps conversion rate. All devices include an internal reference (2.5V) to provide a well-regulated, low-noise reference for both the ADC and DAC. Programmable reference modes for the ADC and DAC allow the use of an internal reference, an external reference, or a combinati...




logo    Since 2024. D4U Semiconductor.   |   Contact Us   |   Privacy Policy