logo

MAX445 Maxim Low-Cost / High-Resolution / 200MHz Video CRT Driver Datasheet

MAX4456EPL+ 비디오 스위치 IC 1 채널 40-PDIP


Maxim
MAX445
MAX445
Part Number MAX445
Manufacturer Maxim
Description The MAX445 is a high-performance, monolithic, variablegain transconductance amplifier with a high-voltage open-collector output capable of directly driving a video display (CRT cathode). A 2.5ns rise time is achieved using a peaking network with a 200Ω load resistor and an 8pF total load (CRT and pa...
Features o 2.5ns Rise/Fall Time into an 8pF Load o 200MHz Small-Signal Bandwidth o 50Vp-p Output o Ground Referenced Differential Inputs o Linear Variable Gain for Contrast Control o Offset Adjustment for Black Level o 5.5V Bandgap Reference o Drives 1280 x 1024 and 1530 x 1280 Displays MAX445 ______________Ordering Information PART MAX445CPG MAX445C/D TEMP. RANGE 0°C to +70°C* 0°C to +70°C** PIN-PACKAGE 24 Power-Tab DIP Dice ________________________Applications CRT Driver for High-Resolution Monochrome and Color Displays High-Voltage, Variable-Gain Transconductance Amplifier * Case temperature ran...

Document Datasheet MAX445 datasheet pdf (77.62KB)
Distributor Distributor
DigiKey
Stock 560 In Stock
Price
19 units: 23093.525 KRW
BuyNow BuyNow BuyNow (Manufacturer a Rochester Electronics LLC)




MAX445 Distributor

part
Analog Devices Inc
MAX4450EXK+T
OP AMP, 210MHZ, 485V/US, SC70-5
5000 units: 2672 KRW
2500 units: 2904 KRW
500 units: 3171 KRW
250 units: 3535 KRW
100 units: 3724 KRW
Distributor
element14 Asia-Pacific

2435 In Stock
BuyNow BuyNow
part
Rochester Electronics LLC
MAX4456EPL+
비디오 스위치 IC 1 채널 40-PDIP
19 units: 23093.525 KRW
Distributor
DigiKey

560 In Stock
BuyNow BuyNow
part
Analog Devices Inc
MAX4452EUK+T
High Speed Operational Amplifiers Low-Cost, +3V/+5V, 620 A, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs
1 units: 2.95 USD
10 units: 2.51 USD
100 units: 2.18 USD
250 units: 2.07 USD
500 units: 1.97 USD
2500 units: 1.96 USD
Distributor
Mouser Electronics

1061 In Stock
BuyNow BuyNow
part
Analog Devices Inc
MAX4451ESA+
Ultra-Small, Low-Cost, 210MHz,
1 units: 4.47 USD
10 units: 4.014 USD
25 units: 3.7952 USD
100 units: 3.2891 USD
500 units: 2.79992 USD
1000 units: 2.36138 USD
2500 units: 2.24331 USD
Distributor
Analog Devices Inc

426 In Stock
BuyNow BuyNow
part
Maxim Integrated Products
MAX4451EKA
MAX4451 Ultra-Small 210Mhz, Single-Supply Operational Amplifier With Rail-To-Rail Outputs '
1000 units: 2.33 USD
500 units: 2.47 USD
100 units: 2.58 USD
25 units: 2.69 USD
1 units: 2.74 USD
Distributor
Rochester Electronics

7163 In Stock
BuyNow BuyNow
part
SMC Corporation of America
PF3W721-14-LT-MA-X445
DIGITAL FLOW SWITCH FOR WATER, 3 COLOR, PF3W SERIES | SMC Corporation PF3W721-14-LT-MA-X445
1 units: 2136.33 USD
Distributor
RS

0 In Stock
No Longer Stocked
part
Maxim Integrated Products
MAX4450EUK+
OP-AMP, 26000UV OFFSET-MAX, PDSO5
13 units: 1.83 USD
3 units: 2.1045 USD
1 units: 2.2875 USD
Distributor
Quest Components

33 In Stock
BuyNow BuyNow
part
Maxim Integrated Products
MAX4450EUK+T
Electronic Component
No price available
Distributor
ComSIT Asia

1250 In Stock
No Longer Stocked
part
MAX4456EPL+
INSTOCK
No price available
Distributor
Chip 1 Exchange

80 In Stock
No Longer Stocked
part
Maxim Integrated Products
MAX4454EUD
No price available
Distributor
Bristol Electronics

50 In Stock
No Longer Stocked





MAX445 Similar Datasheet

Part Number Description
MAX400
manufacturer
Maxim
Ultra Low Offset Voltage Operational Amplifier
...
MAX4000
manufacturer
Maxim
2.5GHz 45dB RF-Detecting Controllers
The MAX4000/MAX4001/MAX4002 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) operating in the 0.1GHz to 2.5GHz frequency range. A typical dynamic range of 45dB makes this family of log amps useful in a variety of wireless applications including cellular handset PA control, transmitter power measurement, and RSSI for terminal devices. Logarithmic amplifiers provide much wider measurement range and superior accuracy to controllers based on diode detectors. Excellent temperature stability is achieved over the full operating range of -40°C to +85°C. The choice of three different input voltage ranges eliminates the need for external attenuators, thus sim...
MAX40000
manufacturer
Maxim Integrated
1.7V nanoPower Comparators
The MAX40000/MAX40001 are tiny, single comparators with built-in voltage references that are ideal for a wide variety of portable electronics applications, such as cell phones, portable instruments, and notebooks that have extremely tight board space and power constraints. The MAX40000/MAX40001 are available in a 6-bump waferlevel package (WLP) with 1.11mm x 0.76mm footprint and a 6-pin SOT23 package. The MAX40000 has a push-pull output and the MAX40001 has an open-drain output. The devices offer a supply voltage range from 1.7V to 5.5V and consume only 0.9µA of supply current. They also feature internal filtering to provide high RF immunity, important in many portable applications. The devi...
MAX40001
manufacturer
Maxim Integrated
1.7V nanoPower Comparators
The MAX40000/MAX40001 are tiny, single comparators with built-in voltage references that are ideal for a wide variety of portable electronics applications, such as cell phones, portable instruments, and notebooks that have extremely tight board space and power constraints. The MAX40000/MAX40001 are available in a 6-bump waferlevel package (WLP) with 1.11mm x 0.76mm footprint and a 6-pin SOT23 package. The MAX40000 has a push-pull output and the MAX40001 has an open-drain output. The devices offer a supply voltage range from 1.7V to 5.5V and consume only 0.9µA of supply current. They also feature internal filtering to provide high RF immunity, important in many portable applications. The devi...
MAX40002
manufacturer
Analog Devices
nanoPower 4-Bump Comparator
The MAX40002–MAX40005 and MAX40012–MAX40015 tiny, single comparators are ideal for a wide variety of portable electronics applications such as cell phones, media players, and notebooks that have extremely tight board space and power constraints. These comparators are offered in both, a miniature 4-bump wafer-level package (WLP) with a 0.73mm x 0.73mm footprint (as small as two 0402 resistors) and a 5-pin SOT23 package. This device family operates with a supply voltage range from 1.7V to 5.5V (either VCC or external VREF), and consumes only 500nA of supply current. These devices have a wide input-voltage range of 0.1V to 5.5V, independent of the supply voltage, and maintain high impedance at ...
MAX40002
manufacturer
Maxim Integrated
nanoPower 4-Bump Comparator
The MAX40002–MAX40005 tiny, single comparators are ideal for a wide variety of portable electronics applications such as cell phones, media players, and notebooks that have extremely tight board space and power constraints. These comparators are offered in both, a miniature 4-bump wafer-level package (WLP) with a 0.73mm x 0.73mm footprint (as small as two 0402 resistors) and a 5-pin SOT23 package. This device family operates with a supply voltage range from 1.7V to 5.5V (either VCC or external VREF), and consumes only 500nA of supply current. These devices have a wide input-voltage range of 0.1V to 5.5V, independent of the supply voltage, and maintain high impedance at the inputs even when p...
MAX40003
manufacturer
Analog Devices
nanoPower 4-Bump Comparator
The MAX40002–MAX40005 and MAX40012–MAX40015 tiny, single comparators are ideal for a wide variety of portable electronics applications such as cell phones, media players, and notebooks that have extremely tight board space and power constraints. These comparators are offered in both, a miniature 4-bump wafer-level package (WLP) with a 0.73mm x 0.73mm footprint (as small as two 0402 resistors) and a 5-pin SOT23 package. This device family operates with a supply voltage range from 1.7V to 5.5V (either VCC or external VREF), and consumes only 500nA of supply current. These devices have a wide input-voltage range of 0.1V to 5.5V, independent of the supply voltage, and maintain high impedance at ...
MAX40003
manufacturer
Maxim Integrated
nanoPower 4-Bump Comparator
The MAX40002–MAX40005 tiny, single comparators are ideal for a wide variety of portable electronics applications such as cell phones, media players, and notebooks that have extremely tight board space and power constraints. These comparators are offered in both, a miniature 4-bump wafer-level package (WLP) with a 0.73mm x 0.73mm footprint (as small as two 0402 resistors) and a 5-pin SOT23 package. This device family operates with a supply voltage range from 1.7V to 5.5V (either VCC or external VREF), and consumes only 500nA of supply current. These devices have a wide input-voltage range of 0.1V to 5.5V, independent of the supply voltage, and maintain high impedance at the inputs even when p...
MAX40004
manufacturer
Analog Devices
nanoPower 4-Bump Comparator
The MAX40002–MAX40005 and MAX40012–MAX40015 tiny, single comparators are ideal for a wide variety of portable electronics applications such as cell phones, media players, and notebooks that have extremely tight board space and power constraints. These comparators are offered in both, a miniature 4-bump wafer-level package (WLP) with a 0.73mm x 0.73mm footprint (as small as two 0402 resistors) and a 5-pin SOT23 package. This device family operates with a supply voltage range from 1.7V to 5.5V (either VCC or external VREF), and consumes only 500nA of supply current. These devices have a wide input-voltage range of 0.1V to 5.5V, independent of the supply voltage, and maintain high impedance at ...
MAX40004
manufacturer
Maxim Integrated
nanoPower 4-Bump Comparator
The MAX40002–MAX40005 tiny, single comparators are ideal for a wide variety of portable electronics applications such as cell phones, media players, and notebooks that have extremely tight board space and power constraints. These comparators are offered in both, a miniature 4-bump wafer-level package (WLP) with a 0.73mm x 0.73mm footprint (as small as two 0402 resistors) and a 5-pin SOT23 package. This device family operates with a supply voltage range from 1.7V to 5.5V (either VCC or external VREF), and consumes only 500nA of supply current. These devices have a wide input-voltage range of 0.1V to 5.5V, independent of the supply voltage, and maintain high impedance at the inputs even when p...




logo    Since 2024. D4U Semiconductor.   |   Contact Us   |   Privacy Policy