logo

AMS05 Advanced Monolithic Systems VOLTAGE REFERENCES Datasheet

HAMS0505G1 Liquid Tight Fitting, ATEX Flameproof, Male Thread, 25mm, M25, Class I Div2, SS | Kopex by ABB HAMS0505G1


Advanced Monolithic Systems
AMS05
Part Number AMS05
Manufacturer Advanced Monolithic Systems
Description The AMS04 and the AMS05 are two-terminal, band-gap voltage reference diodes, with an output voltage of 1.25V for the AMS04 and 2.5V for the AMS05. These devices feature low dynamic impedance and good temperature coefficient, operating over a wide current range. Since the band-gap reference of these ...
Features
• Low Temperature Coefficient
• Wide Operating Current Range AMS04…………………….15µ A to 20mA AMS05…………………….20µ A to 20mA
• Max. 1Ω Dynamic Impedance
• Typ. 2% Output tolerance AMS04/AMS05 VOLTAGE REFERENCES APPLICATIONS
• Battery Powered Systems
• Instrumentation
• A/D, D/A Converters
• Current sources
• Power Supplies
• Telecommunication GENERAL DESCRIPTION The AMS04 and the AMS05 are two-terminal, band-gap voltage reference diodes, with an output voltage of 1.25V for the AMS04 and 2.5V for the AMS05. These devices feature low dynamic impedance and good temperature coefficient, operating over ...

Document Datasheet AMS05 datasheet pdf (40.98KB)
Distributor Distributor
RS
Stock 0 In Stock
Price
1 units: 655.33 USD
BuyNow (No Longer Stocked Kopex)




AMS05 Distributor

part
Kopex
HAMS0505G1
Liquid Tight Fitting, ATEX Flameproof, Male Thread, 25mm, M25, Class I Div2, SS | Kopex by ABB HAMS0505G1
1 units: 655.33 USD
Distributor
RS

0 In Stock
No Longer Stocked
part
ABB Group
HAMS0505G1
KP HAMS0505G1
1 units: 1242.17 USD
3 units: 1192.48 USD
Distributor
Sager

0 In Stock
BuyNow BuyNow
part
Amphenol Corporation
ADC1-DAMS05AD066
CANopen cable, M12, 5-pin, male-male connectors, PVC cable AWG22,300mm (Alt: ADC1-DAMS05AD066)
No price available
Distributor
Avnet Abacus

42 In Stock
BuyNow BuyNow





AMS05 Similar Datasheet

Part Number Description
AMS-117
manufacturer
MA-COM
Low Noise Amplifier
...
AMS-162
manufacturer
MA-COM
Low Noise Amplifier
M/A-COM’s AM-162 is a coupler feedback amplifier with high intercept and compression points. The use of coupler feedback minimizes noise figure and current in a high intercept amplifier. This amplifier is packaged in a TO-8-1 package, a surface mount package and a connectorized version. The ground plane on the PC board should be configured to remove heat from under the package. AM-162 are ideally suited for use where a high intercept, high reliability amplifier is required. TO-8-1 Outline Drawing: SMA Connectorized * SF-1 Rev. V5 ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. Absolute Maximum Ratings 1 Pin Configuration (For AMS-162) Pin No. 1 2 Funct...
AMS0026
manufacturer
axelite
N-CH100V Fast Switching MOSFETs
The AMS0026 is the high cell density trenched N-ch MOSFETs, which provide excellent RDSON and gate charge for most of the synchronous buck converter applications. The AMS0026 meet the RoHS and Green Product requirement, 100% EAS guaranteed with full function reliability approved. FEATURES - Advanced high cell density Trench technology - Super Low Gate Charge - Excellent CdV/dt effect decline - Green Device Available  Product Summery BVDSS 100V RDSON 20mΩ ID 7.5A SOP8 Pin configuration ( 5,6,7,8 ) (4) ( 1,2,3 ) 1/5 Axelite Confidential Materials, do not copy or distribute without written consent. Rev.1.1 Oct.27, 2016 ORDER/MARKING INFORMATION Order Information AMS0026 X X Packag...
AMS04
manufacturer
Advanced Monolithic Systems
VOLTAGE REFERENCES
The AMS04 and the AMS05 are two-terminal, band-gap voltage reference diodes, with an output voltage of 1.25V for the AMS04 and 2.5V for the AMS05. These devices feature low dynamic impedance and good temperature coefficient, operating over a wide current range. Since the band-gap reference of these devices uses only transistors and resistors, low noise and good long term stability result. The wide dynamic operating range allows its use with widely varying supplies with excellent regulation. The AMS04 and AMS05 can be used for portable meters, regulators, data acquisition converters and telecommunication. The AMS04 and AMS05 are operational over a temperature range of 0°C to 70°C and are avai...
AMS1004-1.2
manufacturer
Advanced Monolithic Systems
MICROPOWER VOLTAGE REFERENCE
The AMS1004-1.2 is a two-terminal micropower band-gap voltage reference diode. It features a very low dynamic impedance and good temperature coefficient, operating over a 10µA to 20mA current range. On-chip trimming is used to provide tight voltage tolerance. Since the AMS1004-1.2 is a band-gap reference, uses only transistors and resistors, low noise and good long term stability result. Careful design of the AMS1004-1.2 has made the device exceptionally tolerant of capacitive loading, making it easy to use in almost any reference application. The wide dynamic operating range allows its use with widely varying supplies with excellent regulation. The extremely low power drain of the AMS1004-1...
AMS1004-2.5
manufacturer
Advanced Monolithic Systems
MICROPOWER VOLTAGE REFERENCE
The AMS1004-2.5 is a two-terminal micropower band-gap voltage reference diode. It features a very low dynamic impedance and good temperature coefficient, operating over a 20µA to 20mA current range. On-chip trimming is used to provide tight voltage tolerance. Since the AMS1004-2.5 is a band-gap reference, uses only transistors and resistors, low noise and good long term stability result. Careful design of the AMS1004-2.5 has made the device exceptionally tolerant of capacitive loading, making it easy to use in almost any reference application. The wide dynamic operating range allows its use with widely varying supplies with excellent regulation. The extremely low power drain of the AMS1004-2...
AMS1009
manufacturer
Advanced Monolithic Systems
VOLTAGE REFERENCE DIODE
The AMS1009 is a precision band-gap voltage reference diode. This voltage reference features a very low dynamic impedance and good temperature coefficient, operating over a wide current range of 400µA to 10mA. On-chip trimming is used to provide tight tolerance and minimize temperature drift. A third terminal allows the reference voltage to be adjusted to ±5% to calibrate out system errors. The AMS1009 is used as a precision 2.5V low voltage reference for digital voltmeters, power supplies or op amp circuitry, and the 2.5V make it easy to obtain a stable reference from 5V logic supplies. The AMS1009 is available in TO-92 and SO-8 packages operating over a 0°C to 70°C temperature range. ORDE...
AMS104
manufacturer
Panasonic
(AMSxxxx) Light Sensor
Light Sensor (AMS1, 3) Cadmium-free sensor with spectral response The Through-hole Type for easy implementation as a CdS cell replacement • SMD type LIGHT SENSOR TYPICAL APPLICATIONS 1. Brightness detection for LCD backlight control for LCD devices (mobile phones, LCD TVs, car navigation systems, mobile PCs, and PDAs). 2. Brightness detection for controlling the keypad backlight in mobile phones. 3. Brightness detection for circuits in household lighting, crime prevention lighting, and automatic lighting for bicycle. 4. Brightness detection for wall clocks (radio clocks). FEATURES 1. Built-in optical filter for spectral response similar to that of the human eye. Peak sensitivity wavelength ...
AMS104T
manufacturer
Panasonic
(AMSxxxT) Light Sensor
Light Sensor (AMS1, 3, 4) Cadmium-free sensor with spectral response Chip type ideal for brightness adjustment of mobile device displays • SMD type L 2.0mm .079inch W 3.2mm .126inch H 1.0mm .039inch LIGHT SENSOR TYPICAL APPLICATIONS SMD and Through-hole types 1. Brightness detection for LCD backlight control for LCD devices (LCD TVs, car navigation systems, and mobile PCs). 2. Brightness detection for circuits in residential lighting, lighting for security, and automatic lighting for bicycle. 3. Household applicances (day/night energy savings for air conditioners and electric hot water pots, etc.) 4. Brightness detection for wall clocks (radio clocks). Chip type 1. Brightness detection for ...




logo    Since 2024. D4U Semiconductor.   |   Contact Us   |   Privacy Policy