logo

TPS61311 Texas Instruments 1.5-A Multiple LED Camera Flash and Video Light Driver Datasheet

TPS61311YFFT LED 드라이버 IC 3 출력 DC DC 조정기 승압(부스트) PWM 조광 1.5A(플래시) 20-DSBGA


Texas Instruments
TPS61311
TPS61311
Part Number TPS61311
Manufacturer Texas Instruments (https://www.ti.com/)
Description The TPS6131x family is an integrated solution with a wide feature set for driving up to three LEDs for stillcamera flash strobe and video-camera lighting applications. It is based on a high efficiency synchronous boost topology with combinable current sinks to drive up to three white LEDs in paralle...
Features
•1 Operational Modes:
  – Video Light and Flash Strobe
  – Voltage Regulated Converter: 3.8 V to 5.7 V With Down Mode
  – Standby: 2 µA (Typical)
• LED VF Measurement
• Power-Save Mode for Improved Efficiency at Low Output Power, Up to 95% Efficiency
• I2C Compatible Interface up to 3.4 Mbps
• Dual Wire Camera Module Interface
• Zero Latency Tx-Masking Input
• Hardware Reset Input
• Privacy Indicator LED Output
• GPIO and Power Good Output
• Various Safe Operation and Robust Handling Features:
  – LED Temperature Monitoring
  – Open and Shorted LED Detection and Protection
  – Integrated LED Safety Timer ...

Document Datasheet TPS61311 datasheet pdf (2.31MB)
Distributor Distributor
DigiKey
Stock 185 In Stock
Price
100 units: 1706.74 KRW
25 units: 2003.32 KRW
10 units: 2123.3 KRW
1 units: 2366 KRW
BuyNow BuyNow BuyNow (Manufacturer a Texas Instruments)




TPS61311 Distributor

part
Texas Instruments
TPS61311YFFT
LED 드라이버 IC 3 출력 DC DC 조정기 승압(부스트) PWM 조광 1.5A(플래시) 20-DSBGA
100 units: 1706.74 KRW
25 units: 2003.32 KRW
10 units: 2123.3 KRW
1 units: 2366 KRW
Distributor
DigiKey

185 In Stock
BuyNow BuyNow
part
Texas Instruments
TPS61311YFFT
LED Lighting Drivers 1.5A Multiple LED Camera Flash Drvr
1 units: 1.64 USD
10 units: 1.39 USD
100 units: 1.19 USD
250 units: 0.781 USD
500 units: 0.687 USD
Distributor
Mouser Electronics

0 In Stock
No Longer Stocked
part
Texas Instruments
TPS61311YFFR
1.5A Multiple LED Camera Flash Driver With Serial Interface
1000 units: 0.5677 USD
500 units: 0.6011 USD
100 units: 0.6278 USD
25 units: 0.6545 USD
1 units: 0.6679 USD
Distributor
Rochester Electronics

171000 In Stock
BuyNow BuyNow





TPS61311 Similar Datasheet

Part Number Description
TPS613
manufacturer
Toshiba
SILICON NPN TRANSISTOR
...
TPS61300
manufacturer
Texas Instruments
1.5-A and 4.1-A Multiple LED Camera Flash Driver
The TPS6130xx device is based on a high-frequency synchronous boost topology with constant current sinks to drive up to three white LEDs in parallel (400‑mA, 800-mA, and 400-mA maximum flash current). The extended high-current mode (HC_SEL) allows up to 1025-mA, 2050-mA, and 1025-mA flash current out of the storage capacitor. The high-capacity storage capacitor on the output of the boost regulator provides the high-peak flash LED current, thereby reducing the peak current demand from the battery to a minimum. The 2-MHz switching frequency allows the use of small and low profile 2.2-μH inductors. To optimize overall efficiency, the device operates with a 400-mV LED feedback voltage. The TPS61...
TPS61301
manufacturer
Texas Instruments
1.5-A and 4.1-A Multiple LED Camera Flash Driver
The TPS6130xx device is based on a high-frequency synchronous boost topology with constant current sinks to drive up to three white LEDs in parallel (400‑mA, 800-mA, and 400-mA maximum flash current). The extended high-current mode (HC_SEL) allows up to 1025-mA, 2050-mA, and 1025-mA flash current out of the storage capacitor. The high-capacity storage capacitor on the output of the boost regulator provides the high-peak flash LED current, thereby reducing the peak current demand from the battery to a minimum. The 2-MHz switching frequency allows the use of small and low profile 2.2-μH inductors. To optimize overall efficiency, the device operates with a 400-mV LED feedback voltage. The TPS61...
TPS61305
manufacturer
Texas Instruments
1.5-A and 4.1-A Multiple LED Camera Flash Driver
The TPS6130xx device is based on a high-frequency synchronous boost topology with constant current sinks to drive up to three white LEDs in parallel (400‑mA, 800-mA, and 400-mA maximum flash current). The extended high-current mode (HC_SEL) allows up to 1025-mA, 2050-mA, and 1025-mA flash current out of the storage capacitor. The high-capacity storage capacitor on the output of the boost regulator provides the high-peak flash LED current, thereby reducing the peak current demand from the battery to a minimum. The 2-MHz switching frequency allows the use of small and low profile 2.2-μH inductors. To optimize overall efficiency, the device operates with a 400-mV LED feedback voltage. The TPS61...
TPS61305A
manufacturer
Texas Instruments
1.5-A and 4.1-A Multiple LED Camera Flash Driver
The TPS6130xx device is based on a high-frequency synchronous boost topology with constant current sinks to drive up to three white LEDs in parallel (400‑mA, 800-mA, and 400-mA maximum flash current). The extended high-current mode (HC_SEL) allows up to 1025-mA, 2050-mA, and 1025-mA flash current out of the storage capacitor. The high-capacity storage capacitor on the output of the boost regulator provides the high-peak flash LED current, thereby reducing the peak current demand from the battery to a minimum. The 2-MHz switching frequency allows the use of small and low profile 2.2-μH inductors. To optimize overall efficiency, the device operates with a 400-mV LED feedback voltage. The TPS61...
TPS61306
manufacturer
Texas Instruments
1.5-A and 4.1-A Multiple LED Camera Flash Driver
The TPS6130xx device is based on a high-frequency synchronous boost topology with constant current sinks to drive up to three white LEDs in parallel (400‑mA, 800-mA, and 400-mA maximum flash current). The extended high-current mode (HC_SEL) allows up to 1025-mA, 2050-mA, and 1025-mA flash current out of the storage capacitor. The high-capacity storage capacitor on the output of the boost regulator provides the high-peak flash LED current, thereby reducing the peak current demand from the battery to a minimum. The 2-MHz switching frequency allows the use of small and low profile 2.2-μH inductors. To optimize overall efficiency, the device operates with a 400-mV LED feedback voltage. The TPS61...
TPS61310
manufacturer
Texas Instruments
1.5-A Multiple LED Camera Flash and Video Light Driver
The TPS6131x family is an integrated solution with a wide feature set for driving up to three LEDs for stillcamera flash strobe and video-camera lighting applications. It is based on a high efficiency synchronous boost topology with combinable current sinks to drive up to three white LEDs in parallel. The 2-MHz switching frequency allows the use of small and low-profile 2.2-µH inductors. To optimize overall efficiency, the device operates with a low LEDfeedback voltage and regulated output-voltage adaptation. The device integrates a control scheme that automatically optimizes the LED current flash budget as a function of the battery voltage condition. The TPS6131x not only operates as a regu...
TPS61322
manufacturer
Texas Instruments
1.8-A switch current boost converter
The TPS61322 is a synchronous boost converter with only 6.5-µA quiescent current. The TPS61322 provides a power-supply solution for products powered by alkaline battery, NiMH rechargeable battery, or one-cell Li-ion battery. The boost converter is based on a hysteretic control topology using synchronous rectification to obtain maximum efficiency at minimal quiescent current. The TPS61322 also allows the use of small external inductor and capacitors. Higher than 90% efficiency is achieved at 10-mA load from 1.5-V input to 2.2-V output conversion. The TPS61322 can also support high output current applications with an external schottky diode. The TPS613222A provides higher than 500-mA output ...
TPS61325
manufacturer
Texas Instruments
1.5-A to 4.1-A Multiple LED Camera Flash Driver
The TPS6132x device is based on a high-frequency synchronous boost topology with constant current sinks to drive up to three white LEDs in parallel (445mA, 890-mA, 445-mA maximum flash current). The extended high-current mode (HC_SEL) allows up to 1025-mA, 2050-mA, and 1025-mA flash current out of the storage capacitor. The high-capacity storage capacitor on the output of the boost regulator provides the high-peak flash LED current, thereby reducing the peak current demand from the battery to a minimum. The 2-MHz switching frequency allows the use of small and low profile 2.2-μH inductors. To optimize overall efficiency, the device operates with a 400-mV LED feedback voltage. The TPS6132x de...




logo    Since 2024. D4U Semiconductor.   |   Contact Us   |   Privacy Policy