logo

74HC4515D nexperia 4-to-16 line decoder/demultiplexer Datasheet

74HC4515D,653 Latch/Decoder/Demultiplexer Single 4-to-16 24-Pin SO T/R


nexperia
74HC4515D
Part Number 74HC4515D
Manufacturer nexperia (https://www.nexperia.com/)
Description The 74HC4515 is a 4-to-16 line decoder/demultiplexer having four binary weighted address inputs (A0 to A3) with latches, a latch enable input (LE), an enable input (E) and 16 inverting outputs (Q0, to Q15). When LE is HIGH, the selected output is determined by the data on An. When LE goes LOW, the ...
Features and benefits
• Inverting outputs
• CMOS input levels
• 16-line demultiplexing capability
• Decodes 4 binary-coded inputs into 16 mutually-exclusive outputs
• Complies with JEDEC standard no. 7 A
• ESD protection:
  – HBM JESD22-A114F exceeds 2000 V
  – MM JESD22-A115-A exceeds 200 V
• Specified from -40 °C to +85 °C and -40 °C to +125 °C 3 Applications
• Digital multiplexing
• Address decoding
• Hexadecimal/BCD decoding 4 Ordering information Table 1. Ordering information Type number Package Temperature range 74HC4515D −40 °C to +125 °C Name SO24 Description plastic small outline packa...

Document Datasheet 74HC4515D datasheet pdf (200.95KB)
Distributor Distributor
Arrow Electronics
Stock 3 In Stock
Price
1 units: 0.0958 USD
0 units: 0.4759 USD
BuyNow BuyNow BuyNow (Manufacturer a Nexperia)




74HC4515D Distributor

part
Nexperia
74HC4515D,653
DECODER/DEMULTIPLEXER, 4:16, SOIC-24
5000 units: 451 KRW
2500 units: 483 KRW
1000 units: 528 KRW
500 units: 666 KRW
100 units: 764 KRW
Distributor
element14 Asia-Pacific

0 In Stock
BuyNow BuyNow
part
Nexperia
74HC4515D,653
디코더/디멀티플렉서 1 x 4:16 24-SO
No price available
Distributor
DigiKey

0 In Stock
BuyNow BuyNow
part
Nexperia
74HC4515D,653
Latch/Decoder/Demultiplexer Single 4-to-16 24-Pin SO T/R
1 units: 0.0958 USD
0 units: 0.4759 USD
Distributor
Arrow Electronics

3 In Stock
BuyNow BuyNow
part
NXP Semiconductors
74HC4515D,653
74HC4515D - Decoder/Driver, HC/UH Series, Inverted Output, CMOS, PDSO24 '
1000 units: 0.4289 USD
500 units: 0.4541 USD
100 units: 0.4743 USD
25 units: 0.4945 USD
1 units: 0.5046 USD
Distributor
Rochester Electronics

65 In Stock
BuyNow BuyNow
part
NXP Semiconductors
74HC4515D
Demultiplexer/Decoder, 4 To 16 Line, 24 Pin, Plastic, SOP
5 units: 1.025 USD
1 units: 1.23 USD
Distributor
Quest Components

10 In Stock
BuyNow BuyNow
part
NXP Semiconductors
74HC4515D
4-TO-16 LINE DECODER/DEMULTIPLEXER WITH INPUT LATCHES Decoder/Driver, HC/UH Series, Inverted Output, CMOS, PDSO24
No price available
Distributor
ComSIT Asia

540 In Stock
No Longer Stocked





74HC4515D Similar Datasheet

Part Number Description
74HC4510
manufacturer
Philips
BCD up/down counter
The 74HC/HCT4510 are high-speed Si-gate CMOS devices and are pin compatible with the “4510” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4510 are edge-triggered synchronous up/down BCD counters with a clock input (CP), an up/down count control input (UP/DN), an active LOW count enable input (CE), an asynchronous active HIGH 74HC/HCT4510 parallel load input (PL), four parallel inputs (D0 to D3), four parallel outputs (Q0 to Q3), an active LOW terminal count output (TC), and an overriding asynchronous master reset input (MR). Information on D0 to D3 is loaded into the counter while PL is HIGH, independent of all other input conditions except ...
74HC4510
manufacturer
NXP Semiconductors
BCD up/down counter
The 74HC/HCT4510 are high-speed Si-gate CMOS devices and are pin compatible with the “4510” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4510 are edge-triggered synchronous up/down BCD counters with a clock input (CP), an up/down count control input (UP/DN), an active LOW count enable input (CE), an asynchronous active HIGH 74HC/HCT4510 parallel load input (PL), four parallel inputs (D0 to D3), four parallel outputs (Q0 to Q3), an active LOW terminal count output (TC), and an overriding asynchronous master reset input (MR). Information on D0 to D3 is loaded into the counter while PL is HIGH, independent of all other input conditions except ...
74HC4511
manufacturer
NXP Semiconductors
BCD to 7-segment latch/decoder/driver
The 74HC4511; 74HCT4511 is a BCD to 7-segment latch/decoder/driver with four address inputs (A, B, C, D), a latch enable input (LE), a ripple blanking input (BI), a lamp test input (LT), and seven segment outputs (a to g). When LE is LOW, the state of the segment outputs (a to g) is determined by the data on A to D. When LE goes HIGH, the last data present on A to D are stored in the latches and the segment outputs remain stable. When LT is LOW, all the segment outputs are HIGH independent of all other input conditions. With LT HIGH, a LOW on BI forces all segment outputs LOW. The inputs LT and BI do not affect the latch circuit. Inputs include clamp diodes. This enables the use of current ...
74HC4511
manufacturer
nexperia
BCD to 7-segment latch/decoder/driver
The 74HC4511; 74HCT4511 is a BCD to 7-segment latch/decoder/driver with four address inputs (A, B, C, D), a latch enable input (LE), a ripple blanking input (BI), a lamp test input (LT), and seven segment outputs (a to g). When LE is LOW, the state of the segment outputs (a to g) is determined by the data on A to D. When LE goes HIGH, the last data present on A to D are stored in the latches and the segment outputs remain stable. When LT is LOW, all the segment outputs are HIGH independent of all other input conditions. With LT HIGH, a LOW on BI forces all segment outputs LOW. The inputs LT and BI do not affect the latch circuit. Inputs include clamp diodes. This enables the use of current ...
74HC4511D
manufacturer
nexperia
BCD to 7-segment latch/decoder/driver
The 74HC4511; 74HCT4511 is a BCD to 7-segment latch/decoder/driver with four address inputs (A, B, C, D), a latch enable input (LE), a ripple blanking input (BI), a lamp test input (LT), and seven segment outputs (a to g). When LE is LOW, the state of the segment outputs (a to g) is determined by the data on A to D. When LE goes HIGH, the last data present on A to D are stored in the latches and the segment outputs remain stable. When LT is LOW, all the segment outputs are HIGH independent of all other input conditions. With LT HIGH, a LOW on BI forces all segment outputs LOW. The inputs LT and BI do not affect the latch circuit. Inputs include clamp diodes. This enables the use of current ...
74HC4514
manufacturer
NXP Semiconductors
4-to-16 line decoder/demultiplexer
The 74HC/HCT4514 are high-speed Si-gate CMOS devices and are pin compatible with “4514” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. 74HC/HCT4514 The 74HC/HCT4514 are 4-to-16 line decoders/demultiplexers having four binary weighted address inputs (A0 to A3), with latches, a latch enable input (LE), and an active LOW enable input (E). The 16 outputs (Q0 to Q15) are mutually exclusive active HIGH. When LE is HIGH, the selected output is determined by the data on An. When LE goes LOW, the last data present at An are stored in the latches and the outputs remain stable. When E is LOW, the selected output, determined by the contents of the latch, is HIGH. A...
74HC4514
manufacturer
nexperia
4-to-16 line decoder/demultiplexer
The 74HC4514; 74HCT4514 is a 4-to-16 line decoder/demultiplexer having four binary weighted address inputs (A0 to A3), with latches, a latch enable input (LE), an enable input (E) and 16 outputs (Q0 to Q15). When LE is HIGH, the selected output is determined by the data on An. When LE goes LOW, the last data present at An are stored in the latches and the outputs remain stable. When E is LOW, the selected output, determined by the contents of the latch, is HIGH. At E HIGH, all outputs are LOW. The enable input E does not affect the state of the latch. When the device is used as a demultiplexer, E is the data input and A0 to A3 are the address inputs. Inputs include clamp diodes. This enables...
74HC4514D
manufacturer
nexperia
4-to-16 line decoder/demultiplexer
The 74HC4514; 74HCT4514 is a 4-to-16 line decoder/demultiplexer having four binary weighted address inputs (A0 to A3), with latches, a latch enable input (LE), an enable input (E) and 16 outputs (Q0 to Q15). When LE is HIGH, the selected output is determined by the data on An. When LE goes LOW, the last data present at An are stored in the latches and the outputs remain stable. When E is LOW, the selected output, determined by the contents of the latch, is HIGH. At E HIGH, all outputs are LOW. The enable input E does not affect the state of the latch. When the device is used as a demultiplexer, E is the data input and A0 to A3 are the address inputs. Inputs include clamp diodes. This enables...
74HC4515
manufacturer
NXP Semiconductors
4-to-16 line decoder/demultiplexer
The 74HC/HCT4515 are high-speed Si-gate CMOS devices and are pin compatible with “4515” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. 74HC/HCT4515 The 74HC/HCT4515 are 4-to-16 line decoders/demultiplexers having four binary weighted address inputs (A0 to A3) with latches, a latch enable input (LE), and an active LOW enable input (E). The 16 inverting outputs (Q0 to Q15) are mutually exclusive active LOW. When LE is HIGH, the selected output is determined by the data on An. When LE goes LOW, the last data present at An are stored in the latches and the outputs remain stable. When E is LOW, the selected output, determined by the contents of the latch, is...
74HC4515
manufacturer
nexperia
4-to-16 line decoder/demultiplexer
The 74HC4515 is a 4-to-16 line decoder/demultiplexer having four binary weighted address inputs (A0 to A3) with latches, a latch enable input (LE), an enable input (E) and 16 inverting outputs (Q0, to Q15). When LE is HIGH, the selected output is determined by the data on An. When LE goes LOW, the last data present at An are stored in the latches and the outputs remain stable. When E is LOW, the selected output, determined by the contents of the latch, is LOW. When E is HIGH, all outputs are HIGH. The enable input E does not affect the state of the latch. When the device is used as a demultiplexer, E is the data input and A0 to A3 are the address inputs. Inputs include clamp diodes. This en...




logo    Since 2024. D4U Semiconductor.   |   Contact Us   |   Privacy Policy