logo

SN54LVTH162245 Texas Instruments 3.3-V ABT 16-BIT BUS TRANSCEIVERS Datasheet


Texas Instruments
SN54LVTH162245
Part Number SN54LVTH162245
Manufacturer Texas Instruments (https://www.ti.com/)
Description ORDERING INFORMATION The 'LVTH162245 devices are 16-bit (dual-octal) noninverting 3-state transceivers designed for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment. These devices can be used as two 8-bit transceivers or one 16-bit tra...
Features
• Members of the Texas Instruments Widebus™ Family
• A-Port Outputs Have Equivalent 22-Ω Series Resistors, So No External Resistors Are Required
• Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC)
• Support Unregulated Battery Operation Down to 2.7 V
• Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C
• Ioff and Power-Up 3-State Support Hot Insertion
• Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
• Distributed VCC and GND Pins Minimize High-Speed Switching Noise
• Flow-Through Architecture Optimizes PCB L...

Document Datasheet SN54LVTH162245 datasheet pdf (0.96MB)




SN54LVTH162245 Distributor






SN54LVTH162245 Similar Datasheet

Part Number Description
SN54LVTH162240
manufacturer
Texas Instruments
3.3-V ABT 16-BIT BUFFERS/DRIVERS
ORDERING INFORMATION The 'LVTH162240 devices are 16-bit buffers/drivers designed specifically for low-voltage (3.3-V) VCC operation and to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. They have the capability to provide a TTL interface to a 5-V system environment. These devices can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer and provide inverting outputs and symmetrical active-low output-enable (OE) inputs. The outputs, which are designed to source or sink up to 12 mA, include equivalent 22-Ω series resistors to reduce overshoot and undershoot. When VCC is between 0 and 1.5 V...
SN54LVTH162241
manufacturer
Texas Instruments
3.3-V ABT 16-BIT BUFFERS/DRIVERS
ORDERING INFORMATION These 16-bit buffers/drivers are designed specifically for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment. The devices can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. The devices provide noninverting outputs and complementary output-enable (OE and OE) inputs. The outputs, which are designed to source or sink up to 12 mA, include equivalent 22-Ω series resistors to reduce overshoot and undershoot. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers there...
SN54LVTH162244
manufacturer
Texas Instruments
3.3-V ABT 16-BIT BUFFERS/DRIVERS
ORDERING INFORMATION ORDERING INFORMATION TA –40°C to 85°C PACKAGE (1) FBGA – GRD FBGA – ZRD (Pb-free) Reel of 1000 Tube of 25 SSOP – DL Reel of 1000 TSSOP – DGG Reel of 2000 –55°C to 125°C VFBGA – GQL VFBGA – ZQL (Pb-free) CFP – WD Reel of 1000 Tube ORDERABLE PART NUMBER 74LVTH162244GRDR 74LVTH162244ZRDR SN74LVTH162244DL SN74LVTH162244DLG4 SN74LVTH162244DLR 74LVTH162244DLRG4 SN74LVTH162244DGGR 74LVTH162244DGGRG4 74LVTH162244GRE4 SN74LVTH162244KR 74LVTH162244ZQLR SNJ54LVTH162244WD TOP-SIDE MARKING LL2244 LVTH162244 LVTH162244 LL2244 SNJ54LVTH162244WD (1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www....




logo    Since 2024. D4U Semiconductor.   |   Contact Us   |   Privacy Policy