logo

TPS54328 Texas Instruments 3-A Synchronous Step-Down Converter Datasheet

TPS54328DRCT 벅 스위칭 조정기 IC 포지티브 가변 0.76V 1 출력 3A 10-VFDFN 노출형 패드


Texas Instruments
TPS54328
TPS54328
Part Number TPS54328
Manufacturer Texas Instruments (https://www.ti.com/)
Description The TPS54328 is an adaptive on-time D-CAP2™ mode synchronous buck converter. The TPS54328 enables system designers to complete the suite of various end-equipment power bus regulators with a cost effective, low component count, low standby current solution. The main control loop for the TPS54328 uses...
Features
•1 D-CAP2™ Mode Enables Fast Transient Response
• Low Output Ripple and Allows Ceramic Output Capacitor
• Wide Input Voltage Range: 4.5 V to 18 V
• Output Voltage Range: 0.76 V to 7 V
• Highly Efficient Integrated FETs Optimized for Lower Duty Cycle Applications
  – 100 mΩ (High-Side) and 70 mΩ (Low-Side)
• High Efficiency, Less Than 10 µA at Shutdown
• High Initial Bandgap Reference Accuracy
• Adjustable Soft Start
• Pre-Biased Soft Start
• 700-kHz Switching Frequency (fSW)
• Cycle-By-Cycle Overcurrent Limit
• Auto-Skip Eco-Mode™ for High Efficiency at Light Load 2 Applications
• Wide Range of ...

Document Datasheet TPS54328 datasheet pdf (2.62MB)
Distributor Distributor
DigiKey
Stock 250 In Stock
Price
500 units: 1031.374 KRW
250 units: 1171.64 KRW
BuyNow BuyNow BuyNow (Manufacturer a Texas Instruments)




TPS54328 Distributor

part
Texas Instruments
TPS54328DDAR
DC/DC CONV, SYNC BUCK, 700KHZ
2500 units: 853 KRW
1000 units: 913 KRW
500 units: 1157 KRW
250 units: 1274 KRW
100 units: 1391 KRW
50 units: 1591 KRW
10 units: 1790 KRW
1 units: 1997 KRW
Distributor
element14 Asia-Pacific

2238 In Stock
BuyNow BuyNow
part
Texas Instruments
TPS54328DRCT
벅 스위칭 조정기 IC 포지티브 가변 0.76V 1 출력 3A 10-VFDFN 노출형 패드
500 units: 1031.374 KRW
250 units: 1171.64 KRW
Distributor
DigiKey

250 In Stock
BuyNow BuyNow
part
Texas Instruments
TPS54328DRCR
Switching Voltage Regulators 4.5V-18V Inp 3A Sync SD DCAP Md Cnvrtr
1 units: 1.63 USD
10 units: 1.38 USD
100 units: 1.06 USD
500 units: 0.935 USD
1000 units: 0.738 USD
3000 units: 0.629 USD
6000 units: 0.621 USD
9000 units: 0.61 USD
Distributor
Mouser Electronics

8768 In Stock
BuyNow BuyNow
part
PennEngineering (PEM)
TPS54328DDAR
Step-down type Adjustable 760mV7V 3A 4.5V18V SOIC-8-EP DC-DC Converters ROHS
1000 units: 0.1344 USD
500 units: 0.14 USD
100 units: 0.1459 USD
1 units: 0.152 USD
Distributor
NTEMALL

3784 In Stock
BuyNow BuyNow
part
Texas Instruments
TPS54328DRCT
IC REG BUCK ADJUSTABLE 3A 10VSON / Buck Switching Regulator IC Positive Adjustable 0.76V 1 Output 3A 10-VFDFN Exposed Pad
55 units: 0.99 USD
125 units: 0.812 USD
195 units: 0.787 USD
265 units: 0.761 USD
340 units: 0.736 USD
455 units: 0.66 USD
Distributor
Win Source Electronics

37000 In Stock
BuyNow BuyNow





TPS54328 Similar Datasheet

Part Number Description
TPS5430
manufacturer
Texas Instruments
3-A Wide Input Range Step-Down Converter
The TPS543x is a high-output-current PWM converter that integrates a low-resistance, high-side N-channel MOSFET. Included on the substrate with the listed features are a high-performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions; an undervoltagelockout circuit to prevent start-up until the input voltage reaches 5.5V; an internally set slow-start circuit to limit inrush currents; and a voltage feedforward circuit to improve the transient response. Using the ENA pin, shutdown supply current is reduced to 15μA typically. Other features include an active-high enable, overcurrent limiting, overvoltage protection and thermal shutdown. To re...
TPS5430-EP
manufacturer
Texas Instruments
WIDE-INPUT-RANGE STEP-DOWN CONVERTER
As a member of the SWIFT™ family of dc/dc regulators, the TPS5430 is a high-output-current pulse-width modulation (PWM) converter that integrates a low-resistance high-side N-channel MOSFET. Included on the substrate with the listed features are a high-performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions, an undervoltage lockout (UVLO) circuit to prevent start-up until the input voltage reaches 5.5 V, an internally set slow-start circuit to limit inrush currents, and a voltage feed-forward circuit to improve the transient response. Using the enable (ENA) pin, shutdown supply current is reduced to 18 µA typically. Other features includ...
TPS5430-Q1
manufacturer
Texas Instruments
3-A Wide-Input-Range Step-Down Converter
The TPS5430-Q1 is a high output current PWM converter that integrates a low-resistance high side N-channel MOSFET. Included on the substrate with the listed features are a high-performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions, an undervoltage lockout (UVLO) circuit to prevent start-up until the input voltage reaches 5.5 V, an internally set slowstart circuit to limit inrush currents, and a voltage feed-forward circuit to improve the transient response. Using the enable (ENA) pin, shutdown supply current is reduced to 18 μA typically. Other features include an active-high enable, overcurrent limiting, overvoltage protection (OVP), ...
TPS54302
manufacturer
Texas Instruments
Synchronous Step-Down Converter
The TPS54302 device is a 4.5-V to 28-V input voltage range, 3-A synchronous buck converter. The device includes two integrated switching FETs, internal loop compensation, and 5-ms internal soft start to reduce component count. By integrating the MOSFETs and employing the SOT-23 package, the TPS54302 device achieves the high power density and offers a small footprint on the PCB. Advanced Eco-mode implementation maximizes the light load efficiency and reduces the power loss. In the TPS54302 device, the frequency spread spectrum operation is introduced for EMI reduction. Cycle-by-cycle current limit in both high-side MOSFET protects the converter in an overload condition and is enhanced by...
TPS54308
manufacturer
Texas Instruments
Synchronous 350-kHz FCCM Step-Down Converter
The TPS54308 is a 4.5-V to 28-V input voltage range, 3-A synchronous buck converter. The device includes two integrated switching FETs, internal loop compensation, and 5-ms internal soft start to reduce component count. By integrating the MOSFETs and employing the SOT-23 package, the TPS54308 achieves high power density and offers a small footprint on the PCB. The TPS54308 operates in force continuous conduction mode (FCCM) during light load conditions. The switching frequency is maintained at an almost constant level over entire load range. Cycle-by-cycle current limit in both high-side MOSFETs protects the converter in an overload condition and is enhanced by a low-side MOSFET freewhee...
TPS5431
manufacturer
Texas Instruments
3-A Wide Input Range Step-Down Converter
The TPS543x is a high-output-current PWM converter that integrates a low-resistance, high-side N-channel MOSFET. Included on the substrate with the listed features are a high-performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions; an undervoltagelockout circuit to prevent start-up until the input voltage reaches 5.5V; an internally set slow-start circuit to limit inrush currents; and a voltage feedforward circuit to improve the transient response. Using the ENA pin, shutdown supply current is reduced to 15μA typically. Other features include an active-high enable, overcurrent limiting, overvoltage protection and thermal shutdown. To re...
TPS54310
manufacturer
Texas Instruments
3-A Output Synchronous-Buck PWM Switcher
As a member of one of TI's families of dc/dc regulators, the TPS54310 low-input-voltage highoutput-current synchronous-buck PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier that provides high performance under transient conditions; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 3 V; an internally and externally set slow-start circuit to limit in-rush currents; and a power good output useful for processor/logic reset, fault signaling, and supply sequencing. The TPS54310 device is available in a thermally enhanced 20-pin HTSSOP (PWP) PowerPAD™ pa...
TPS54310-EP
manufacturer
Texas Instruments
Synchronous-Buck PWM Switcher
ORDERING INFORMATION As members of the SWIFT™ family of dc/dc regulators, the TPS54310 low input voltage high output current synchronous buck PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier that provides high performance under transient conditions; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 3 V; an internally and externally set slow-start circuit to limit in-rush currents; and a power good output useful for processor/logic reset, fault signaling, and supply sequencing. The TPS54310 device is available in a thermally enhanced 20-pin TSSOP (...
TPS54310-Q1
manufacturer
Texas Instruments
Synchronous-Buck PWM Switcher
As members of the SWIFT family of dc/dc regulators, the TPS54310 low-input-voltage high-output-current synchronous-buck PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high-performance, voltage error amplifier that provides high performance under transient conditions, an undervoltage-lockout circuit to prevent start up until the input voltage reaches 3 V, an internally and externally set slow-start circuit to limit in-rush currents, and a power good output useful for processor/logic reset, fault signaling, and supply sequencing. The TPS54310 device is available in a thermally enhanced 20-pin TSSOP (PWP) PowerPAD package...
TPS54311
manufacturer
Texas Instruments
Synchronous-Buck PWM Switcher
As members of the SWIFT™ family of DC - DC regulators, the TPS54311, TPS54312, TPS54313, TPS54314, TPS54315 and TPS54316 low-inputvoltage high-outputcurrent synchronous-buck PWM converters integrate all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier that provides high performance under transient conditions; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 3 V; an internally and externally set slow-start circuit to limit in-rush currents; and a powergood output useful for processor/logic reset, fault signaling, and supply sequencing. The TPS54311, TPS54312, TPS54313, TPS543...




logo    Since 2024. D4U Semiconductor.   |   Contact Us   |   Privacy Policy