logo

LM741 Texas Instruments Operational Amplifier Datasheet

LM741CN/NOPB OP-AMP, SINGLE, PDIP-8, 0 TO 70DEG C


Texas Instruments
LM741
LM741
Part Number LM741
Manufacturer Texas Instruments (https://www.ti.com/)
Description The LM741 series are general-purpose operational amplifiers which feature improved performance over industry standards like the LM709. They are direct, plug-in replacements for the 709C, LM201, MC1439, and 748 in most applications. The amplifiers offer many features which make their application near...
Features
•1 Overload Protection on the Input and Output
• No Latch-Up When the Common-Mode Range is Exceeded 2 Applications
• Comparators
• Multivibrators
• DC Amplifiers
• Summing Amplifiers
• Integrator or Differentiators
• Active Filters 3 Description The LM741 series are general-purpose operational amplifiers which feature improved performance over industry standards like the LM709. They are direct, plug-in replacements for the 709C, LM201, MC1439, and 748 in most applications. The amplifiers offer many features which make their application nearly foolproof: overload protection on the input and ou...

Document Datasheet LM741 datasheet pdf (688.66KB)
Distributor Distributor
element14 Asia-Pacific
Stock 24756 In stock
Price
5000 units: 516 KRW
2500 units: 543 KRW
1000 units: 582 KRW
500 units: 737 KRW
100 units: 835 KRW
10 units: 1086 KRW
1 units: 1285 KRW
BuyNow BuyNow BuyNow (Manufacturer a Texas Instruments)


Similar Datasheet

Part Number Description
LM70
manufacturer
National Semiconductor
SPI/MICROWIRE 10-Bit plus Sign Digital Temperature Sensor
The LM70 is a temperature sensor, Delta-Sigma analog-to-digital converter with an SPI and MICROWIRE compatible interface available in LLP and MSOP 8-pin packages. The host can query the LM70 at any time to read temperature. A shutdown mode decreases power consumption to less than 10 µA. This mode is useful in systems where low average power consumption is critical. The LM70 has 10-bit plus sign temperature resolution (0.25˚C per LSB) while operating over a temperature range of −55˚C to +150˚C. The LM70’s 2.65V to 5.5V supply voltage range, low supply current and simple SPI interface make it ideal for a wide range of applications. These include thermal management and protection applications i...
LM70
manufacturer
Texas Instruments
SPI/MICROWIRE 10-Bit plus Sign Digital Temperature Sensor
The LM70 is a temperature sensor, Delta-Sigma analog-to-digital converter with an SPI and MICROWIRE compatible interface available in WSON and VSSOP 8-pin packages. The host can query the LM70 at any time to read temperature. A shutdown mode decreases power consumption to less than 10 µA. This mode is useful in systems where low average power consumption is critical. The LM70 has 10-bit plus sign temperature resolution (0.25°C per LSB) while operating over a temperature range of −55°C to +150°C. The LM70's 2.65V to 5.5V supply voltage range, low supply current and simple SPI interface make it ideal for a wide range of applications. These include thermal management and protection applications...
LM7000
manufacturer
Sanyo Semicon Device
Direct PLL Frequency Synthesizer
...
LM7000N
manufacturer
Sanyo Semicon Device
Direct PLL Frequency Synthesizer
...
LM7001
manufacturer
Sanyo
Direct PLL Frequency Synthesizers
Ordering number : EN 3591A NMOS LSI LM7001/7001M Direct PLL Frequency Synthesizers ...
LM7001J
manufacturer
Sanyo Semicon Device
Direct PLL Frequency Synthesizers
No. 5262-4/8 LM7001J, 7001JM Data Input Timing VIH = 2.2 to 6.5 V, VIL = 0 to 0.7 V, Xtal = 5.00 to 7.20 (typ) to 8.00 MHz Data acquisition: On the CL rising edge Note: Data transfers must be started only after the crystal oscillator is operating normally, i.e., after a proper input signal has been supplied to XIN. Parameter Enable setup time Enable hold time Data setup time Data hold time Clock low-level time Clock high-level time Rise time Fall time Symbol tES tEH tSU tHD tLO tHI tR tF Xtal: 7.20 MHz At least 1.5 µs At least 1.5 µs At least 1.5 µs At least 1.5 µs At least 1.5 µs At least 1.5 µs Up to 1 µs Up to 1 µs Xtal: for frequencies other than 7.2 MHz At least [ At least [ At le...
LM7001JM
manufacturer
Sanyo Semicon Device
Direct PLL Frequency Synthesizers
No. 5262-4/8 LM7001J, 7001JM Data Input Timing VIH = 2.2 to 6.5 V, VIL = 0 to 0.7 V, Xtal = 5.00 to 7.20 (typ) to 8.00 MHz Data acquisition: On the CL rising edge Note: Data transfers must be started only after the crystal oscillator is operating normally, i.e., after a proper input signal has been supplied to XIN. Parameter Enable setup time Enable hold time Data setup time Data hold time Clock low-level time Clock high-level time Rise time Fall time Symbol tES tEH tSU tHD tLO tHI tR tF Xtal: 7.20 MHz At least 1.5 µs At least 1.5 µs At least 1.5 µs At least 1.5 µs At least 1.5 µs At least 1.5 µs Up to 1 µs Up to 1 µs Xtal: for frequencies other than 7.2 MHz At least [ At least [ At le...
LM7001M
manufacturer
Sanyo
Direct PLL Frequency Synthesizers
Ordering number : EN 3591A NMOS LSI LM7001/7001M Direct PLL Frequency Synthesizers ...
LM7005
manufacturer
Sanyo Semicon Device
Electronic AV Tuner-Use Electronic Tuning PLL Frequency Synthesizer
...
LM7006
manufacturer
Sanyo Semicon Device
Dual PLL Frequency Synthesizer Circuit
...




logo    Since 2024. D4U Semiconductor.   |   Contact Us   |   Privacy Policy