logo

74LVC573A nexperia Octal D-type transparent latch Datasheet

74LVC573ABQ,115 Latches 74LVC573ABQ/SOT764/DHVQFN20


nexperia
74LVC573A
Part Number 74LVC573A
Manufacturer nexperia (https://www.nexperia.com/)
Description The 74LVC573A is an 8-bit D-type transparent latch with 3-state outputs. The device features latch enable (LE) and output enable (OE) inputs. When LE is HIGH, data at the inputs enter the latches. In this condition the latches are transparent, a latch output will change each time its corresponding D...
Features latch enable (LE) and output enable (OE) inputs. When LE is HIGH, data at the inputs enter the latches. In this condition the latches are transparent, a latch output will change each time its corresponding D-input changes. When LE is LOW the latches store the information that was present at the inputs a set-up time preceding the HIGH-to-LOW transition of LE. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the latches. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices a...

Document Datasheet 74LVC573A datasheet pdf (269.46KB)
Distributor Distributor
Mouser Electronics
Stock 11551 In Stock
Price
1 units: 0.39 USD
10 units: 0.314 USD
100 units: 0.233 USD
500 units: 0.198 USD
1000 units: 0.158 USD
3000 units: 0.148 USD
9000 units: 0.147 USD
BuyNow BuyNow BuyNow (Manufacturer a Nexperia)




74LVC573A Distributor

part
Nexperia
74LVC573ABQ,115
Latches 74LVC573ABQ/SOT764/DHVQFN20
1 units: 0.39 USD
10 units: 0.314 USD
100 units: 0.233 USD
500 units: 0.198 USD
1000 units: 0.158 USD
3000 units: 0.148 USD
9000 units: 0.147 USD
Distributor
Mouser Electronics

11551 In Stock
BuyNow BuyNow
part
Nexperia
74LVC573APW,118
Latch Transparent 3-ST 8-CH D-Type 20-Pin TSSOP T/R
10000 units: 0.1087 USD
2500 units: 0.1219 USD
Distributor
Verical

2500 In Stock
BuyNow BuyNow
part
Nexperia
74LVC573APW,118
Latches SOT360-1 LATCHES
2500 units: 0.14 USD
5000 units: 0.136 USD
7500 units: 0.133 USD
12500 units: 0.129 USD
25000 units: 0.127 USD
37500 units: 0.124 USD
Distributor
TTI

62500 In Stock
BuyNow BuyNow
part
Philips Semiconductors
74LVC573AD
Latch, Single, 8 Bit, 20 Pin, Plastic, SOP
22 units: 0.2 USD
1 units: 0.24 USD
Distributor
Quest Components

33 In Stock
BuyNow BuyNow





74LVC573A Similar Datasheet

Part Number Description
74LVC573A
manufacturer
NXP
Octal D-type transparent latch
The 74LVC573A consists of eight D-type transparent latches, featuring separate D-type inputs for each latch and 3-state true outputs for bus-oriented applications. A Latch Enable (LE) input and an Output Enable (OE) input are common to all internal latches. When LE is HIGH, data at the Dn inputs enters the latches. In this condition, the latches are transparent, that is, a latch output changes each time its corresponding D-input changes. When LE is LOW, the latches store the information that was present at the D-inputs one set-up time preceding the HIGH-to-LOW transition of LE. When OE is LOW, the contents of the eight latches are available at the outputs. When OE is HIGH, the outputs go to ...
74LVC573A
manufacturer
STMicroelectronics
OCTAL D-TYPE LATCH
The 74LVC573A is a low voltage CMOS OCTAL cD-TYPE LATCH fabricated with sub-micron silicon dugate and double-layer metal wiring C2MOS rotechnology. It is ideal for 1.65 to 3.6 VCC operations and low power and low noise Papplications. teThese 8 bit D-Type latch are controlled by...
74LVC573A
manufacturer
Diodes
OCTAL TRANSPARENT D-TYPE LATCH
OCTAL TRANSPARENT D-TYPE LATCH WITH 3 STATE OUTPUTS A Pin Assignments The 74LVC573A provides eight transparent D-type latches. While the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the logic levels set up at the D inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the highimpedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components. OE does not a...
74LVC573A
manufacturer
ON Semiconductor
Low-Voltage CMOS Octal Transparent Latch
74LVC573A Low-Voltage CMOS Octal Transparent Latch With 5 V−Tolerant Inputs and Outputs (3−State, Non−Inverting) The 74LVC573A is a high performance, non−inverting octal transparent latch operating from a 1.2 to 3.6 V supply. High impedance TTL compatible inputs significantly reduce current loading to input drivers while TTL compatible outputs offer improved switching noise performance. A VI specification of 5.5 V allows 74LVC573A inputs to be safely driven from 5 V devices. The 74LVC573A contains 8 D−type latches with 3−state outputs. When the Latch Enable (LE) input is HIGH, data on the Dn inputs enters the latches. In this condition, the latches are transparent, i.e., a latch output wil...
74LVC573A-Q100
manufacturer
nexperia
Octal D-type transparent latch
The 74LVC573A-Q100 consists of eight D-type transparent latches, featuring separate D-type inputs for each latch and 3-state true outputs for bus-oriented applications. A Latch Enable (LE) input and an Output Enable (OE) input are common to all internal latches. When LE is HIGH, data at the Dn inputs enters the latches. In this condition, the latches are transparent, that is, a latch output changes each time its corresponding D-input changes. When LE is LOW, the latches store the information that was present at the D-inputs one set-up time preceding the HIGH-to-LOW transition of LE. When OE is LOW, the contents of the eight latches are available at the outputs. When OE is HIGH, the outputs g...
74LVC574A
manufacturer
NXP
Octal D-type flip-flop
The 74LVC574A is an octal D-type flip-flop featuring separate D-type inputs for each flip-flop and 3-state outputs for bus-oriented applications. A clock (CP) and an Output Enable (OE) input are common to all flip-flops. The eight flip-flops will store the state of their individual D-inputs that meet the set-up and hold times requirements on the LOW to HIGH CP transition. When OE is LOW, the contents of the eight flip-flops are available at the outputs. When OE is HIGH, the outputs go to the high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be applied to the ou...
74LVC574A
manufacturer
nexperia
Octal D-type flip-flop
The 74LVC574A is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times...
74LVC574A
manufacturer
Diodes
OCTAL D-TYPE FLIP-FLOP
The 74LVC574A provides eight edge-triggered D-type flip-flops featuring 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. These devices are particularly suitable for implementing buffer registers, input/output (I/O) ports, bidirectional bus drivers, and working registers. On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels set up at the data (D) inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines signific...
74LVC574A
manufacturer
ON Semiconductor
Low-Voltage CMOS Octal D-Type Flip-Flop
74LVC574A Low-Voltage CMOS Octal D-Type Flip-Flop With 5 V−Tolerant Inputs and Outputs (3−State, Non−Inverting) The 74LVC574A is a high performance, non−inverting octal D−type flip−flop operating from a 1.2 to 3.6 V supply. High impedance TTL compatible inputs significantly reduce current loading to input drivers while TTL compatible outputs offer improved switching noise performance. A VI specification of 5.5 V allows 74LVC574A inputs to be safely driven from 5 V devices. The 74LVC574A consists of 8 edge−triggered flip−flops with individual D−type inputs and 3−state true outputs. The buffered clock and buffered Output Enable (OE) are common to all flip−flops. The eight flip−flops will stor...




logo    Since 2024. D4U Semiconductor.   |   Contact Us   |   Privacy Policy