logo

SMAJ30A Littelfuse 400W TVS Diodes Datasheet

SMAJ30A TVS DIODE, 400W, 30V, UNIDIR, DO-214AC


Littelfuse
SMAJ30A
SMAJ30A
Part Number SMAJ30A
Manufacturer Littelfuse (https://www.littelfuse.com/)
Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Uni-directional Bi-directional Additional Information Resources Accessories Samples Maximum Ratings and Thermal Characteristics (...
Features
■ 400W Peak Pulse Power capability at 10/1000µs waveform, repetition rate (duty cycle): 0.01%
■ Excellent clamping capability
■ Typical IR less than 1μA when VBR min>12V
■ Surface mount footprint for compact PCB layout
■ Low profile package
■ Typical failure mode is short from over-specified voltage or current
■ Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
■ IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact)
■ ESD protection of data lines in accordance with IEC 61000-4-2
■ EFT protection of data lines in accordance with IEC 610004-4
■ Built-in strain relief
■ Fast res...

Document Datasheet SMAJ30A datasheet pdf (841.39KB)
Distributor Distributor
element14 Asia-Pacific
Stock 30000 In stock
Price
15000 units: 186 KRW
5000 units: 210 KRW
BuyNow BuyNow BuyNow (Manufacturer a Littelfuse Inc)


Similar Datasheet

Part Number Description
SMAJ3.3LIR
manufacturer
Leiditech
TVS
SMAJ3.3LIR DO214AC/(SMA) Features ● Glass passivated chip ● 400 W peak pulse power capability with a 10/1000 us waveform, repetitive rate (duty cycle):0.01 % ● Excellent clamping capability ● Low reverse leakage ● Very fast response time ● Lead and body according with RoHS standard Mechanical Data ● Case: DO214AC/(SMA) Molded plastic ● Lead: Solderable per MIL-STD-750, method 2026 ● Epoxy: UL 94V-0 rate flame retardant ● Polarity: Color band denotes cathode end except Bipolar Unit: inch (mm) ● Mounting position: Any Maximum Ratings & Characteristics Ratings at 25℃ ambient temperature unless otherwise specified. Parameter Symbols Value Unit Peak power dissipation with a 10/1000 us wa...
SMAJ30
manufacturer
GME
TRANSIENT VOLTAGE SUPPRESSOR
Production specification TRANSIENT VOLTAGE SUPPRESSOR SMAJ5.0--SMAJ188CA FEATURES z Plastic package has underwriters laboratory flammability classification 94V-0 z Optimized for LAN protection applications z Low profile package with built-in strain relief for surface mounted applications z Low incremental surge resistance, excellent clamping capability z 400W peak pulse power capability with a 10/1000¦Ìs wave form, repetition rate (duty cycle): 0.01% (300W above 78V) z Very fast response time z High temperature soldering guaranteed: 260℃/ 10 seconds at terminals MECHANICAL DATA z Case: JEDEC DO-214AC molded plastic over passivated chip z Terminals: solder plated, solderable per ...
SMAJ30
manufacturer
Microsemi
Transient Voltage Suppressor
This SMAJ5.0-170A series of surface mount 500 W Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components from destruction or degradation. The package outline is similar to the DO-214AC or DO-214BA. It is also available in a unidirectional configuration or as bidirectional with a C or CA suffix part number as well as RoHS Compliant with an “e3”suffix. Their response time is virtually instantaneous. As a result, they can be used for protection from ESD or EFT per IEC61000-4-2 and IEC61000-4-4, or for inductive switching environments and induced RF protection. They can also protect from secondary lightning effects per IEC61000-4-5 and class levels defined herein. ...
SMAJ30
manufacturer
MIC
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS SMAJ5.0 - SMAJ440CA FEATURES ▪ Working peak reverse voltage range – 5.0V to 440V. ▪ Peak power dissipation 400W @10 x 1000 us Pulse ▪ Low profile package. ▪ Excellent clamping capability. ▪ Glass passivated junction. ▪ Fast response time: typically less than 1 ns for Uni-direction. Less than 5 ns for Bi-direction, from 0 Volts to BV min ▪ Typical IR less than 1uA above 10V. ▪ Plastic material has UL flammability classification 94V-O ▪ RoHS compliant in lead-free versions MECHANICAL CHARACTERISTICS ▪ CASE: Void-free, JEDEC DO-214AC Molded Plastic over glass passivated junction. ▪ Mounting Position: Any ▪ Polarity: by cathode band denotes uni-direct...
SMAJ30
manufacturer
EIC
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
SMAJ 5.0 ~ 170A VBR : 6.8 - 200 Volts PPK : 400 Watts SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMA (DO-214AC) FEATURES : * 400W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1µA above 10V MECHANICAL DATA * Case : SMA Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Lead Formed for Surface Mount * Polarity : Color band denotes cathode end except Bipolar. * Mounting position : Any * Weight : 0.064 grams MAXIMUM RATINGS Rating at Ta = 25 °C ambient temperature unless otherwise specified. Rating Symbol Peak Pulse Power Dissipation (Note1,2,5) Fig....
SMAJ30
manufacturer
LITE-ON
SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS
LITE-ON SEMICONDUCTOR SMAJ SERIES SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS STAND-OFF VOLTAGE - 5.0 to 170 Volts POWER DISSIPATION - 400 WATTS FEATURES Rating to 200V VBR For surface mounted applications Reliable low cost construction utilizing molded plastic technique Plastic material has UL flammability classification 94V-O Typical IR less than 1uA above 10V Fast response time: typically less than 1.0ns for Uni-direction,less than 5.0ns for Bi-direction,form 0 Volts to BV min MECHANICAL DATA Case : Molded plastic Polarity : by cathode band denotes uni-directional device none cathode band denotes bi-directional device Weight : 0.002 ounces, 0.064 gram ...
SMAJ30
manufacturer
CYStech Electronics
Surface Mount Transient Voltage Suppressors
CYStech Electronics Corp. Spec. No. : C290SA Issued Date : 2010.01.19 Revised Date : 2016.01.11 Page No. : 1/9 Surface Mount Transient Voltage Suppressors Peak Pulse Power 400W Stand Off Voltage 5.0 to 440V SMAJ5.0 thru SMAJ440CA Features  Low profile package with built-in strain relief for surface mounted applications  Plastic package has UL flammability classification 94V-0  Ideal for ESD protection of data line in accordance with IEC1000-4-2 (IEC801-2)  Ideal for EFT protection of data line in accordance with IEC1000-4-4 (IEC801-4)  Very-fast response time  Optimized for LAN protection applications  Low incremental surge resistance, excellent clamping capability  Glass passivat...
SMAJ30
manufacturer
Taiwan Semiconductor
Surface Mount Transient Voltage Suppressor
SMAJ5.0(A) – SMAJ188(A) Taiwan Semiconductor 400W, 5V - 188V Surface Mount Transient Voltage Suppressor FEATURES ● Ideal for automated placement ● Glass passivated chip junction ● Excellent clamping capability ● Fast response time: Typically less than 1.0ps from 0 V to BV min ● Typical IR less than 1μA above 10V ● 400W peak pulse power capability with a 10/1000μs waveform (300W above 78V) ● Meets ISO 7637-2 (Pulse 1/2a/2b/3a/3b) ● Moisture sensitivity level: level 1, per J-STD-020 ● RoHS Compliant ● Halogen-free according to IEC 61249-2-21 KEY PARAMETERS PARAMETER VALUE UNIT VWM 5 - 188 V VBR 6.4 - 255 V PPPM tp = 10/1000μs waveform 400 W TJ MAX 150 °C Package DO-214AC (SM...
SMAJ30
manufacturer
ProTek Devices
400-WATT TVS
05405 Only One Name Means ProTek’Tion™ 400 Watt TVS Component applications • Power Supply • AC/DC Applications • Telecom SMAJ SERIES DO-214ac package Features • UL Registered • IEC 61000-4-2 (ESD): Level 4 - Air 15kV, Contact 8kV • IEC 61000-4-4 (EFT): 40A 5/50ns • IEC 61000-4-5 (Surge): 8/20µs Waveform • Glass Passivated Chip • 400 Watts Peak Pulse Power per Line (tp = 10/1000µs) • Low Leakage Current • Bidirectional and Unidirectional Configurations • Excellent Clamping Capability • Very Fast Response Time • Available in Multiple Voltages • RoHS Compliant • REACH Compliant Mechanical characteristics • Molded JEDEC DO-214AC Package • Approximate Weight: 0.06 grams • Lead-Free Pure-Tin P...
SMAJ30
manufacturer
LGE
400Watts Surface Mount Transient Voltage Suppressor
SMAJ SERIES 400Watts Surface Mount Transient Voltage Suppressor Features SMA/DO-214AC For surface mounted application Low profile package Built-in strain relief Glass passivated junction Excellent clamping capability Fast response time: Typically less than 1.0ps from 0 volt to BV min. Typical IR less than 1µA above 10V High temperature soldering guaranteed: 260oC / 10 seconds at terminals Plastic material used carries Underwriters Laboratory Flammability Classification 94V-0 400 watts peak pulse power capability with a 10 x 1000 us waveform by 0.01% duty cycle (300W above 78V). 0.063(1.60) 0.051(1.30) 0.096(2.45) 0.078(2.00) 0.059(1.50) 0.035(0.90) 0.181(4.60) 0.161(4.10) 0.108(2.75) 0...




logo    Since 2024. D4U Semiconductor.   |   Contact Us   |   Privacy Policy