logo

5KP250CA SeCoS 5000W Peak Power TVS Datasheet

5KP250CA ESD Protection Diodes / TVS Diodes TVS AXIAL HI-POWER


SeCoS
5KP250CA
Part Number 5KP250CA
Manufacturer SeCoS
Description The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. R-6 FEATURES VBR @TJ = VBR@25°C x (1+ αT x (TJ - 25)) (αT:Temperature Coefficient) Glass passivated chip junction in P600 package 5000W...
Features VBR @TJ = VBR@25°C x (1+ αT x (TJ - 25)) (αT:Temperature Coefficient) Glass passivated chip junction in P600 package 5000W peak pulse capability at 10/1000µs waveform, repetition rate (duty cycles): 0.01% Excellent clamping capability Typical failure mode is short from over-specified voltage or current Fast response time: typically less than 1.0ps from 0 Volts to BV min Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) EFT protection of data lines in accor...

Document Datasheet 5KP250CA datasheet pdf (351.76KB)
Distributor Distributor
Mouser Electronics
Stock 3087 In Stock
Price
1 units: 6.06 USD
10 units: 5.25 USD
25 units: 4.92 USD
100 units: 4.37 USD
250 units: 4.29 USD
500 units: 3.86 USD
800 units: 3.47 USD
2400 units: 3.25 USD
BuyNow BuyNow BuyNow (Manufacturer a Littelfuse Inc)




5KP250CA Distributor

part
Littelfuse Inc
5KP250CA
TVS DIODE, 5KW, BIDIR, P600
1000 units: 4807 KRW
500 units: 5124 KRW
100 units: 5672 KRW
10 units: 6505 KRW
1 units: 8012 KRW
Distributor
element14 Asia-Pacific

664 In Stock
BuyNow BuyNow
part
Littelfuse Inc
5KP250CA
425V 클램프 12A Ipp TVS - 다이오드 스루홀 P600
2400 units: 4690.302 KRW
1600 units: 5005.46 KRW
800 units: 5561.6265 KRW
Distributor
DigiKey

800 In Stock
BuyNow BuyNow
part
Littelfuse Inc
5KP250CA
ESD Protection Diodes / TVS Diodes TVS AXIAL HI-POWER
1 units: 6.06 USD
10 units: 5.25 USD
25 units: 4.92 USD
100 units: 4.37 USD
250 units: 4.29 USD
500 units: 3.86 USD
800 units: 3.47 USD
2400 units: 3.25 USD
Distributor
Mouser Electronics

3087 In Stock
BuyNow BuyNow
part
Littelfuse Inc
5KP250CA-B
TVS Diode Single Bi-Dir 20V 5KW 2-Pin Case P-600 Bulk
25 units: 4.9 USD
14 units: 5.32 USD
Distributor
Verical

70 In Stock
BuyNow BuyNow
part
YAGEO Corporation
5KP250CA/B
ESD Protection Diodes / TVS Diodes 5KP P600 250V 425V
3000 units: 0.84 USD
5100 units: 0.83 USD
Distributor
TTI

0 In Stock
BuyNow BuyNow
part
Micro Commercial Components
5KP250CA-TP
TRANS VOLTAGE SUPPRESSOR DIODE, 5000W, 250V V(RWM), BIDIRECTIONAL, 1 ELEMENT, SILICON
105 units: 1.296 USD
40 units: 1.44 USD
1 units: 2.4 USD
Distributor
Quest Components

226 In Stock
BuyNow BuyNow
part
Littelfuse Inc
5KP250CA-B
Diode: TVS; 291.5V; 12A; bidirectional; ±5%; P600; 5kW; bulk
100 units: 3.75 USD
25 units: 4.02 USD
10 units: 4.47 USD
3 units: 5.06 USD
1 units: 5.63 USD
Distributor
TME

70 In Stock
BuyNow BuyNow
part
Comchip Technology Corporation Ltd
A5KP250CA-G
AUTOMOTIVE TVS DIODE 250VWM 405VC R-6
2250 units: 1.88 USD
1250 units: 2.13 USD
1 units: 4.66 USD
Distributor
NAC

0 In Stock
BuyNow BuyNow
part
YAGEO Corporation
5KP250CA-AT/B
Diode TVS Single Bi-Directional 250V 5kW 2-Pin Axial Leaded Box - Boxed Product (Development Kits) (Alt: 5KP250CA-AT/B)
No price available
Distributor
Avnet Americas

0 In Stock
No Longer Stocked
part
Littelfuse Inc
5KP250CA
DIODE TVS 5000W 250V P600 THT T&R
800 units: 6.3761 USD
1 units: 7.01371 USD
Distributor
Ozdisan Elektronik

0 In Stock
No Longer Stocked





5KP250CA Similar Datasheet

Part Number Description
5KP250A
manufacturer
GW
5000 Watt Axial Lead TVS
5KP SERIES 5000 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS FEATURES * 5000 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V VOLTAGE RANGE 5.0 to 440 Volts 5000 Watts Peak Power R-6 .360(9.1) .340(8.6) DIA. 1.0(25.4) MIN. MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: Axial leads, solderable per MIL-STD-202, method 208 guranteed * Polarity: Color band denotes cathode end * Mounting position: Any .360(9.1) .340(8.6) .052(1.3) .048(1.2) DIA. 1.0(25.4) MIN. Dimensions in inches and (millimeters) MAXIM...
5KP250A
manufacturer
WON-TOP
5000W TRANSIENT VOLTAGE SUPPRESSOR
® WON-TOP ELECTRONICS Features  Glass Passivated Die Construction  5000W Peak Pulse Power Dissipation  5.0V – 440V Standoff Voltage  Uni- and Bi-Directional Versions Available  Excellent Clamping Voltage  Typical Response Time < 1nS  Plastic Case Material has UL Flammability Classification Rating 94V-0 Mechanical Data  Case: P-600, Molded Plastic  Terminals: Plated Leads Solderable per MIL-STD-202, Method 208  Polarity: Cathode Band Except Bi-Directional  Weight: 2.10 grams (approx.)  Mounting Position: Any  Marking: Type Number  Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 6 5KP SERIES 5000W TRANSIENT VOLTAGE SUPPRESSOR Pb AB A D P-600...
5KP250A
manufacturer
Protek Devices
5kW POWER TVS COMPONENT
The 5KP Series, are discrete 5,000 Watt, silicon transient voltage suppressors (TVS) designed for use in applications where large voltage transients can permanently damage voltage sensitive components and equipment. The 5KP series is available in voltages ranging from 5V to 440V with 5 percent and 5 and 10 percent tolerances. Both tolerances are referenced to the power supply output or operating voltage level. This series is compatiable with IEC 61000-4-5 (Surge) requirements. AXIAL LEAD PACKAGE FEATURES • Compatible with IEC 61000-4-5 (Surge): 48A, 8/20µs - L3(Line- Ground), L4(Line-Line) & L1 (Power) • 5,000 Watts Peak Pulse Power per Line (tp = 10/1000µs) • Unidirectional and Bid...
5KP250A
manufacturer
Littelfuse
TVS Diode
The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Bi-directional Agency Approvals Agency Agency File Number E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power Dissipation by 10/1000μs Test Waveform (Fig.2)(Note 1) PPPM 5 kW Steady State Power Dissipation on Infinite Heat Sink at TL=75ºC PD 8.0 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional Only (Note 2) IFSM 400 A Maximum Instantaneous Forward Voltage at 100A for Unidirectional Only (Note 3) VF 3.5/5.0 V O...
5KP250A
manufacturer
MCC
5000 Watt Transient Voltage Suppressors
MCC TM Micro Commercial Components   omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# Features • Unidirectional And Bidirectional • UL Recognized File # E331408 • High Temp Soldering: 260°C for 10 Seconds At Terminals • For Bidirectional Devices Add “C” To The Suffix Of The Part Number: i.e. 5KP6.5C or 5KP6.5CA for 5% Tolerance Devices • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensitivity Level 1 • Marking : Cathode band and type number • Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information) Maximum Ratings • Operating Temperature: -55°C to +175°C • Storage Tem...
5KP250A
manufacturer
SeCoS
5000W Peak Power TVS
The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. R-6 FEATURES VBR @TJ = VBR@25°C x (1+ αT x (TJ - 25)) (αT:Temperature Coefficient) Glass passivated chip junction in P600 package 5000W peak pulse capability at 10/1000µs waveform, repetition rate (duty cycles): 0.01% Excellent clamping capability Typical failure mode is short from over-specified voltage or current Fast response time: typically less than 1.0ps from 0 Volts to BV min Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) ESD protection of data lines in ...
5KP250A
manufacturer
Eris
Transient Voltage Suppressors
5KP SERIES Transient Voltage Suppressors(5000W) 1.0 (25.4) MIN. .052 (1.3) DIA. .048 (1.2) .360 (9.1) .340 (8.6) 1.0 (25.4) MIN. .360 (9.1) DIA. .340 (8.6) R6 Dimensions in inches and (millimeters) Ordering Information Part Number Compound 5KP SERIES General 5KP SERIES-H Halogen Free PRIMARY CHARACTERISTICS VBR 5~190V PPPM 5000W PD 8W TJ max 150°C Features ‧Constructed with Glass Passivated Die ‧5000W peak pulse power Dissipation ‧Excellent clamping capability ‧Uni and Bidirectional unit ‧Very fast response time ‧Component in accordance to RoHS 2002/95/EC Mechanical Data ‧Cases:R6 ‧Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 ‧Terminals: Le...
5KP250A-G
manufacturer
Comchip
5000W Transient Voltage Suppressor
5000W Transient Voltage Suppressor 5KP-G Series Breakdown Voltage: 6.8 to 440 Volts Peak Pulse Power: 5000 Watts RoHS Device Features - Glass passivated chip. - 5000W peak pulse power capability with a 10/1000µs waveform, repetitive rate (duty cycle):0.01% - Low leakage. - Uni and Bidirectional unit. - Excellent clamping capability. - Very fast response time. - UL recognized file # E349157 R - Range: 5KP5.0(C)A thru. 5KP190(C)A Mechanical Data -Case: Molded plastic. -Epoxy: UL 94V-0 rate flame retardant -Lead: Solderable per MIL-STD-202, method 208 guranteed. -Polarity: Color band denotes cathode end except Bipolar. -Mounting position: Any R-6 1.0(25.4) MIN. 0.052(1.32) 0.048(1.22) DIA....
5KP250A-HF
manufacturer
Comchip
5000W Transient Voltage Suppressor
5000W Transient Voltage Suppressor 5KP-HF Series Breakdown Voltage: 6.8 to 440 Volts Peak Pulse Power: 5000 Watts RoHS Device Halogen Free Features - Glass passivated chip. - 5000W peak pulse power capability with a 10/1000µs waveform, repetitive rate (duty cycle):0.01% - Low leakage. - Uni and Bidirectional unit. - Excellent clamping capability. - Very fast response time. - UL recognized file # E349157 R - Range: 5KP5.0(C)A thru. 5KP190(C)A 5KP5.0(C)A-HF Mechanical Data -Case: Molded plastic. -Epoxy: UL 94V-0 rate flame retardant -Lead: Solderable per MIL-STD-202, method 208 guranteed. -Polarity: Color band denotes cathode end except Bipolar. -Mounting position: Any R-6 1.0(25.4) MIN. 0...
5KP250Ae3
manufacturer
Microsemi
5K-Watt Transient Voltage Suppressor Protection Device
This RoHS compliant transient voltage suppressor series 5KP5.0e3 - 5KP250CAe3 provides a range of standoff voltage options from 5.0 to 250V in both unidirectional and bidirectional options. Clamping action is almost instantaneous. As a result, they provide effective protection from ESD and EFT per IEC61000-4-2 and IEC61000-4-4, as well as transients caused by inductive switching and RFI. They also protect from secondary lightning effects per 61000-4-5 at the class levels specified below. Important: For the latest information, visit our website http://www.microsemi.com. FEATURES • Available in both unidirectional and bidirectional configurations • Moisture classification is level 1 with no d...




logo    Since 2024. D4U Semiconductor.   |   Contact Us   |   Privacy Policy