logo

AD7292 Analog Devices 10-Bit Monitor and Control System Datasheet

EVAL-AD7292SDZ Data Conversion IC Development Tools EVALUATION BOARD


Analog Devices
AD7292
Part Number AD7292
Manufacturer Analog Devices (https://www.analog.com/)
Description The AD7292 contains all the functionality required f...
Features 10-bit SAR ADC 8 multiplexed analog input channels Single-ended mode of operation Differential mode of operation 5 V analog input range VREF, 2 × VREF, or 4 × VREF input ranges Input measured with respect to AGND or VDD 4 monotonic, 10-bit, 5 V DACs 2 µs settling time Power-on reset to 0 V 10 mA sink and source capability Internal temperature sensor ±1°C accuracy 12 general-purpose digital I/O pins Internal 1.25 V reference Built-in monitoring features Minimum and maximum value register for each channel Programmable alert thresholds Programmable hysteresis SPI interface Temperature range: −40°...

Document Datasheet AD7292 datasheet pdf (701.25KB)
Distributor Distributor
Mouser Electronics
Stock 1 In stock
Price
1 units: 72.45 USD
BuyNow BuyNow BuyNow (Manufacturer a Analog Devices Inc)


Similar Datasheet

Part Number Description
AD720
manufacturer
Analog Devices
RGB to NTSC/PAL Encoders
RGB to NTSC/PAL Encoders AD720/AD721 (subcarrier amplitude and phase) signals in accordance with either NTSC or PAL standards. These two outputs are also combined to provide a composite video output. All three outputs are available separately at voltages of twice the standard signal levels as required for driving 75 Ω reverse terminated cables. The AD721 also features a bypass mode, in which the RGB inputs may bypass the encoder section of the IC via three gain-of-two amplifiers suitable for driving 75 Ω reverse terminated cables. The AD720 and AD721 provide a complete, fully calibrated function, requiring only termination resistors, bypass capacitors, a clock input at four times the subcar...
AD721
manufacturer
Analog Devices
RGB to NTSC/PAL Encoders
RGB to NTSC/PAL Encoders AD720/AD721 (subcarrier amplitude and phase) signals in accordance with either NTSC or PAL standards. These two outputs are also combined to provide a composite video output. All three outputs are available separately at voltages of twice the standard signal levels as required for driving 75 Ω reverse terminated cables. The AD721 also features a bypass mode, in which the RGB inputs may bypass the encoder section of the IC via three gain-of-two amplifiers suitable for driving 75 Ω reverse terminated cables. The AD720 and AD721 provide a complete, fully calibrated function, requiring only termination resistors, bypass capacitors, a clock input at four times the subcar...
AD7216N2L
manufacturer
Emerson
AC-DC / External Freestanding Adapter
Embedded Power for Business-Critical Continuity AD7216N2L 72 Watts Total Power: Input Voltage: # of Outputs: 72 Watts 90 - 264 Vac Single Rev. 04.16.08 AD7216N2L 1 of 2 RoHS Electrical Specifications Input Special Features • Class II • Universal AC input • Fully regulated output • Overvoltage and short circuit protection • Constant voltage • High efficiency • IEC320 AC receptacle, 2 pin (type C8) • Built in EMI filter www.DataSheet4U.com • (CISPR 22 Class B) • AC Input fuse • Complies with Blue Angel requirement Input range: Frequency: Input current: Efficiency: EMI/RFI: Safety ground leakage current: 90-264 Vac (wide range) 47-63 Hz 2 A maximum 85% typical FCC Part 15, Subpart B Clas...
AD722
manufacturer
Analog Devices
RGB to NTSC/PAL Encoder
The AD722 is a low cost RGB to NTSC/PAL Encoder that converts red, green and blue color component signals into their corresponding luminance (baseband amplitude) and chrominance (subcarrier amplitude and phase) signals in accordance with either NTSC or PAL standards. These two outputs are also combined to provide composite video output. All three outputs can simultaneously drive 75 Ω, reverse-terminated cables. All logical inputs are CMOS compatible. The chip operates from a single +5 V supply. No external delay lines or filters are required. The AD722 may be powered down when not in use. FUNCTIONAL BLOCK DIAGRAM SUBCARRIER FSC XOSC 4FSC NTSC/PAL HSYNC VSYNC 4FSC SYNC SEPARATOR XNOR CSYNC ...
AD7224
manufacturer
Analog Devices
8-Bit DAC
The AD7224 is a precision 8-bit voltage-output, digital-toanalog converter, with output amplifier and double buffered interface logic on a monolithic CMOS chip. No external trims are required to achieve full specified performance for the part. The double buffered interface logic consists of two 8-bit registers–an input register and a DAC register. Only the data held in the DAC registers determines the analog output of the converter. The double buffering allows simultaneous update in a system containing multiple AD7224s. Both registers may be made transparent under control of three external l...
AD7225
manufacturer
Analog Devices
LC2MOS Quad 8-Bit DAC with Separate Reference Inputs
The AD7225 contains four 8-bit voltage output digital-toanalog converters, with output buffer amplifiers and interface logic on a single monolithic chip. Each D/A converter has a separate reference input terminal. No external trims are required to achieve full specified performance for the part. The double-buffered interface logic consists of two 8-bit registers per channel–an input register and a DAC register. Control inputs A0 and A1 determine which input register is loaded when WR goes low. Only the data held in the DAC registers determines the analog outputs of the converters. The doublebuffering allows simultaneous update of all four outputs under control of LDAC. All logic inputs are ...
AD7226
manufacturer
Analog Devices
Quad 8-Bit D/A Converter
The AD7226 contains four 8-bit voltage-output digital-toanalog converters, with output buffer amplifiers and interface logic on a single monolithic chip. No external trims are required to achieve full specified performance for the part. Separate on-chip latches are provided for each of the four D/A converters. Data is transferred into one of these data latches through a common 8-bit TTL/CMOS (5 V) compatible input port. Control inputs A0 and A1 determine which DAC is loaded when WR goes low. The control logic is speed-compatible with most 8-bit microprocessors. Each D/A converter includes an output buffer amplifier capable of driving up to 5 mA of output current. The amplifiers’ offsets are ...
AD7228
manufacturer
Analog Devices
LC2MOS Octal 8-Bit DAC
The AD7228 contains eight 8-bit voltage mode digital-to- analog converters (DACs), with output buffer amplifiers and interface logic on a single monolithic chip. No external trims are required to achieve the full specified performance for the device. Separate on-chip latches are provided for each of the eight DACs. Data is transferred into the data latches through a common 8-bit, TTL/CMOS-compatible input port (5 V). The A0, A1, and A2 address inputs determine which latch is loaded when WR goes low. The control logic is speed compatible with most 8-bit microprocessors. Specified performance is guaranteed for input reference voltages from 2 V to 10 V when using dual supplies. The device is al...
AD7228A
manufacturer
Analog Devices
LC2MOS Octal 8-Bit DAC
The AD7228A contains eight 8-bit voltage-mode digital-toanalog converters, with output buffer amplifiers and interface logic on a single monolithic chip. No external trims are required to achieve full specified performance for the part. Separate on-chip latches are provided for each of the eight D/A converters. Data is transferred into the data latches through a common 8-bit TTL/CMOS (5 V) compatible input port. Address inputs A0, A1 and A2 determine which latch is loaded when WR goes low. The control logic is speed compatible with most 8-bit microprocessors. Specified performance is guaranteed for input reference voltages from +2 to +10 V when using dual supplies. The part is also specifie...
AD723
manufacturer
Analog Devices
2.7 V to 5.5 V RGB-to-NTSC/PAL Encoder with Load Detect and Input Termination Switch
The AD723 is a low cost RGB-to-NTSC/PAL encoder that converts analog red, green, and blue color component signals into their corresponding luminance and chrominance signals for display on an NTSC or PAL television. Luminance (Y) and Chrominance (C) signals are available individually for S-video, FUNCTIONAL BLOCK DIAGRAM TRIPLE INPUT TERMINATION RIN RT GND RGB-TO-YUV ENCODING MATRIX DC CLAMP Y 4-POLE LPF CSYNC DC CLAMP U 4-POLE LPF BURST DC CLAMP V 4-POLE LPF BURST QUADRATURE DECODER SYNC SEPARATOR FSC BURST CSYNC STND CE TV DETECT SIN COS YSET BALANCED MODULATORS CHROMINANCE 4-POLE LPF C 8FSC CLK CURRENT OUTPUT DRIVERS WITH SMART LOAD DETECT LUMINANCE LUMA DELAY LINE 4-POLE LPF LUMA TRAP C...




logo    Since 2024. D4U Semiconductor.   |   Contact Us   |   Privacy Policy